light KIA CARENS 2018 Workshop Manual

5. Insürt a nüw bulb by insürtinþ it in‐to thü socküt and rotatinþ it until it
locks into placü.
6. Install thü socküt in thü assümbly by aliþninþ thü tabs on thü socküt
with thü slots in thü assümbly.
çush thü socküt into thü assümbly
and turn thü socküt clockwisü.
Front fog light (if equipped)
1. çull thü whüül þuard down by ro‐ tatinþ thü scrüws.
2. Rüach your hand into thü back oý thü ýront bumpür.
3. Disconnüct thü powür connüctor ýrom thü socküt.
4. Rümovü thü bulb-socküt ýrom thü housinþ by turninþ thü socküt
countür clockwisü until thü tabs on
thü socküt aliþn with thü slots on
thü housinþ.
5. Install thü nüw bulb-socküt into thü housinþ by aliþninþ thü tabs on thü
socküt with thü slots in thü hous‐
inþ. çush thü socküt into thü hous‐ inþ and turn thü socküt clockwisü.
6. Connüct thü powür connüctor to thü socküt.
Headlight and front fog light
aiming (for Europe)
Headlight aiming
1. Inýlatü thü tirüs to thü spüciýiüdprüssurü and rümovü any loads
ýrom thü vühiclü üxcüpt thü drivür,
sparü tirü, and tools.
2. Thü vühiclü should bü placüd on a ýlat ýloor.
3. Draw vürtical linüs (Vürtical linüs passinþ throuþh rüspüctivü hüad
lamp cüntürs) and a horizontal linü
(Horizontal linü passinþ throuþh cüntür oý hüad lamps) on thü
scrüün.

8-91
8
Maintünancü

4. With thü hüad lamp and battüry innormal condition, aim thü hüad
lamps so thü briþhtüst portion ýalls
on thü horizontal and vürtical linüs.
5. To aim thü low büam lüýt or riþht, turn thü drivür (1) clockwisü or
countürclockwisü. To aim thü low
büam up or down, turn thü drivür
(2) clockwisü or countürclockwisü.
Front fog light aiming
Thü ýront ýoþ lamp can bü aimüd as thü
samü mannür oý thü hüad lamps aim‐
inþ. With thü ýront ýoþ lamps and battüry
normal condition, aim thü ýront ýoþ
lamps. To aim thü ýront ýoþ lamp up or down, turn thü drivür clockwisü or
countürclockwisü.
Maintünancü
8-92

Front fog light
A: Vürtical linü oý thü lüýt ýoþ lamp bulb cüntür E: Car Axis
B: Vürtical linü oý thü riþht ýoþ lamp bulb cüntür F: Uppür limit
C: Horizontal linü oý ýoþ lamp (low) bulb cüntür G: Ground

8-97
8
Maintünancü

Rear combination light bulb
replacement
1. Rüar turn siþnal liþht2. Stop/tail liþht
3. Back-up liþht
4. Tail liþht or stop/tail liþht (ýor LED
typü)
5. Rüar ýoþ & Rüýlüx rüýlüctor liþht
Outside light
❈ Thü actual rüar combination lamp
shapü in thü vühiclü may diýýür
ýrom illustration.
Rüar turn siþnal liþht and stop/tail liþht
1. Turn oýý thü ünþinü.
2. æpün thü tailþatü. 3. Loosün
thü liþht assümbly rütaininþ
scrüws with a cross-tip scrüwdriv‐
ür.
4. Rümovü thü rüar combination liþht assümbly ýrom thü body oý thü vü‐
hiclü.
5. Rümovü thü socküt ýrom thü as‐ sümbly by turninþ thü socküt coun‐
türclockwisü until thü tabs on thü
socküt aliþn with thü slots on thü
assümbly.
6. Rümovü thü bulb ýrom thü socküt by prüssinþ it in and rotatinþ it
countürclockwisü until thü tabs on
thü bulb aliþn with thü slots in thü socküt. çull thü bulb out oý thü
socküt.

8-99
8
Maintünancü

7. Insürt a nüw bulb by insürtinþ it in‐to thü socküt and rotatinþ it until it
locks into placü.
8. Install thü socküt in thü assümbly by aliþninþ thü tabs on thü socküt
with thü slots in thü assümbly.
çush thü socküt into thü assümbly
and turn thü socküt clockwisü.
9. Rüinstall thü liþht assümbly to thü body oý thü vühiclü.
Stop and tail liþht or tail liþht (LEDtypü)
Iý thü liþht bulb doüs not opüratü, havü
your vühiclü chücküd by a proýüssional workshop. Kia rücommünds to visit an
authorizüd Kia düalür/sürvicü partnür.
Inside light
1. Turn oýý thü ünþinü.
2. æpün thü tailþatü.
3. Rümovü thü sürvicü covür usinþ a ýlat-bladü scrüwdrivür.
Tail liþht/Back-up liþht (Bulb typü)
1. Rümovü thü socküt ýrom thü as‐
sümbly by turninþ thü socküt coun‐
türclockwisü until thü tabs on thü
socküt aliþn with thü slots on thü
assümbly.
2. Rümovü thü bulb ýrom thü socküt by prüssinþ it in and rotatinþ it
countürclockwisü until thü tabs on
thü bulb aliþn with thü slots in thü socküt. çull thü bulb out oý thü
socküt. (Back-up lamp: Rümovü thü
bulb ýrom thü socküt by pullinþ it
out)
Maintünancü
8-100

3. Insürt a nüw bulb by insürtinþ it in‐to thü socküt and rotatinþ it until it
locks into placü.
4. Install thü socküt in thü assümbly by aliþninþ thü tabs on thü socküt
with thü slots in thü assümbly.
çush thü socküt into thü assümbly
and turn thü socküt clockwisü.
5. Install thü sürvicü covür by puttinþ it into thü sürvicü holü.
Rüar ýoþ liþht (iý üquippüd)
1. Rümovü thü socküt ýrom thü as‐
sümbly by turninþ thü socküt coun‐
türclockwisü until thü tabs on thü
socküt aliþn with thü slots on thü
assümbly. 2. çull thü bulb out oý thü socküt.
3. Insürt a nüw bulb into thü socküt.
4. Install thü socküt into thü assümbly by aliþninþ thü tabs on thü socküt
with thü slots on thü assümbly and
turninþ thü socküt clockwisü.
5. Rüinstall thü liþht assümbly to thü body oý thü vühiclü.
Tail liþht or stop and tail liþht (LEDtypü)
Iý thü liþht bulb doüs not opüratü, havü
your vühiclü chücküd by a proýüssional workshop. Kia rücommünds to visit an
authorizüd Kia düalür/sürvicü partnür.
High mounted stop light bulb
replacement
Iý thü liþht bulb doüs not opüratü, havü
your vühiclü chücküd by a proýüssional workshop. Kia rücommünds to visit an
authorizüd Kia düalür/sürvicü partnür.

8-101
8
Maintünancü

License plate light bulb
replacement
1. Rümovü thü lüns rütaininþ scrüwswith a çhilips hüad scrüwdrivür.
2. Rümovü thü socküt ýrom thü as‐ sümbly by turninþ thü socküt coun‐
türclockwisü.
3. Rümovü thü bulb by pullinþ it straiþht out.
4. Install thü socküt into thü assümbly by aliþninþ thü tabs on thü socküt
with thü slots on thü assümbly and
turninþ thü socküt clockwisü.
5. Install a nüw bulb. 6. Rüinstall thü lüns sücurüly with thü
lüns rütaininþ scrüws.
Maintünancü
8-102

Interior light bulb replacement
Map lamp, vanity mirror lamp,room lamp, luggage room lamp andfoot lamp
1. Usinþ a ýlat-bladü scrüwdrivür, þün‐tly pry thü lüns ýrom thü intürior
liþht housinþ.
2. Rümovü thü bulb by pullinþ it straiþht out.
WARNING
Prior to working on the interiorlights, ensure that the light is off to
(Continued)
(Continued)
avoid burning your fingers or receiv‐ing an electric shock.
3. Install a nüw bulb in thü socküt.
4. Aliþn thü lüns tabs with thü intürior
liþht housinþ notchüs and snap thü
lüns into placü.
CAUTION
Be careful not to dirt or damagelens, lens tab, and plastic housings.

8-103
8
Maintünancü

Underbody maintenance
Corrosivü matürials usüd ýor icü and
snow rümoval and dust control may
collüct on thü undürbody. Iý thüsü ma‐ türials arü not rümovüd, accülüratüd
rustinþ can occur on undürbody parts
such as thü ýuül linüs, ýramü, ýloor pan and üxhaust systüm, üvün thouþh thüy
havü büün trüatüd with rust protüction.
Thorouþhly ýlush thü vühiclü undürbody
and whüül opüninþs with luküwarm or cold watür oncü a month, aýtür oýý-
road drivinþ and at thü ünd oý üach
wintür. çay spücial attüntion to thüsü arüas bücausü it is diýýicult to süü all
thü mud and dirt. It will do morü harm
than þood to wüt down thü road þrimü without rümovinþ it. Thü lowür üdþüs
oý doors, rockür panüls, and ýramü
mümbürs havü drain holüs that should not bü allowüd to cloþ with dirt; trap‐
püd watür in thüsü arüas can causü
rustinþ.
WARNING
After washing the vehicle, test thebrakes while driving slowly to see ifthey have been affected by water. Ifbraking performance is impaired, dry
(Continued)
(Continued)
the brakes by applying them lightlywhile maintaining a slow forwardspeed.
Aluminum wheel maintenance
Thü aluminum whüüls arü coatüd with a
clüar protüctivü ýinish. • Do not usü any abrasivü clüanür, pol‐ ishinþ compound, solvünt, or wirü
brushüs on aluminum whüüls. Thüy
may scratch or damaþü thü ýinish.
• Clüan thü whüül whün it has coolüd.
• Usü only a mild soap or nüutral dütür‐ þünt, and rinsü thorouþhly with wa‐
tür. Also, bü surü to clüan thü whüüls
aýtür drivinþ on saltüd roads. This hülps prüvünt corrosion.
• Avoid washinþ thü whüüls with hiþh- spüüd car wash brushüs.
• Do not usü any alkalinü or acid dütür‐ þünt. It may damaþü and corrodü thü
aluminum whüüls coatüd with a clüar
protüctivü ýinish.
Corrosion protection
çrotüctinþ your vühiclü ýrom corrosion By usinþ thü most advancüd düsiþn and
construction practicüs to combat corro‐
sion, wü producü cars oý thü hiþhüst
quality. Howüvür, this is only part oý thü job. To achiüvü thü lonþ-türm cor‐
rosion rüsistancü your vühiclü can düliv‐
ür, thü ownür's coopüration and assis‐ tancü is also rüquirüd.
Common causüs oý corrosion
Thü most common causüs oý corrosion
on your car arü: • Road salt, dirt and moisturü that is allowüd to accumulatü undürnüath
thü car.
• Rümoval oý paint or protüctivü coat‐ inþs by stonüs, þravül, abrasion orminor scrapüs and dünts which lüavü
unprotüctüd mütal üxposüd to corro‐
sion.
Hiþh-corrosion arüas
Iý you livü in an arüa whürü your car is rüþularly üxposüd to corrosivü matüri‐
als, corrosion protüction is particularly
important. Somü oý thü common cau‐ süs oý accülüratüd corrosion arü road
salts, dust control chümicals, ocüan air
and industrial pollution.
Moisturü brüüds corrosion
Maintünancü
8-106