bluetooth KIA OPTIMA PLUG-IN HYBRID 2017 Owner's Manual

(Continued)
•When the içod® or AUX device
power is connected to the power
jack, playing the external device
may result in noise. In such cases,
disconnect the power connection
before use.
•êkipping or improper operation
may occur depending on the char‐
acteristics of your içod®/içhone®
device.
•If your içhone® is connected to
both the Bluetooth® Wireless
Technology and UêB, the sound
may not be properly played. In
your içhone®, select the Dock con‐
nector or Bluetooth® Wireless
Technology to change the sound
output (source).
•içod® mode cannot be operated
when the içod® cannot be recog‐
nized due to the playing of ver‐
sions that do not support commu‐
nication protocols, cases of içod®
abnormalities and defects.
(Continued)
(Continued)
•For fifth generation içod® Nano
devices, the içod® may not be rec‐
ognized when the battery level is
low. çlease charge the içod® for
use.
•êearch/play orders shown within
the içod® device may differ with
the orders shown within the audio
system.
•If the içod® malfunctions due to
an içod® device defect, reset the
içod® and try again. (To learn
more, refer to your içod® manual)
•êome içod®s may not sync with
the êystem depending on its ver‐
sion. If the Media is removed be‐
fore the Media is recognized, then
the system may not properly re‐
store the previously operated
mode. (içad charging is not sup‐
ported.)
•Beside support 1M cable when
purchasing içod®/içhone® prod‐
ucts, Long Cable cannot be recog‐
nized.
NOTICE
nUsing the Bluetooth® Wireless
Technology Audio Mode
•Bluetooth® Wireless Technology
Audio Mode can be used only when
a Bluetooth® Wireless Technology
phone has been connected.
•Bluetooth® Wireless Technology
Audio Mode will not be available
when connecting mobile phones
that do not support this feature.
•While Bluetooth® Wireless Tech‐
nology Audio is playing, if the
Bluetooth® Wireless Technology
phone is connected, then the mu‐
sic will also stop.
•Moving the Track up/down while
playing Bluetooth® Wireless Tech‐
nology audio mode may result in
pop noises in some mobile phones.
•Bluetooth® Wireless Technology
streaming audio may not be sup‐
ported in some mobile phones.
(Continued)

6-61
6
Audio system

(Continued)
•When returning to Bluetooth®
Wireless Technology Audio mode
after ending a call, the mode may
not automatically restart in some
mobile phones.
•éeceiving an incoming call or mak‐
ing an outgoing call while playing
Bluetooth® Wireless Technology
Audio may result in audio interfer‐
ence.
NOTICE
nUsing the Bluetooth® Wireless
Technology Cellular çhone
•Bluetooth® Wireless Technology
Handsfree refers to a device which
allows the user to conveniently
make phone calls with Bluetooth®
Wireless Technology mobile
phones through the audio system.
(Continued)
(Continued)
•Bluetooth® Wireless Technology
allows devices to be connected in a
short distance, including handsfree
devices, stereo headsets, wireless
remote controllers, etc. For more
information, visit the
Bluetooth®
Wireless Technology website at
www.Bluetooth.com. Before using
Bluetooth® Wireless Technology
audio features.
•The Bluetooth® word mark and
logos are registered trademarks
owned by Bluetooth® êIG, Inc. and
any use of such marks by Kia is
under license. Other trademarks
and trade names are those of
their respective owners. A Blue‐
tooth® enabled cell phone is re‐
quired to use Bluetooth® Wireless
Technology.
•Bluetooth® Wireless Technology
features supported within the ve‐
(Continued)
(Continued)
hicle are as follows. êome features
may not be supported depending
on your Bluetooth® Wireless Tech‐
nology device.
-Answering and placing Blue‐
tooth® Wireless Technology
Handsfree calls
-Menu operation during call
(êwitch to çrivate, êwitch to call
waiting, Outgoing volume)
-Download Call History
-Download Mobile çhone book
-çhone book/Call History Auto
Download
-Bluetooth® Wireless Technology
device auto connection
-Bluetooth® Wireless Technology
Audio
(Continued)
Audio system
6-62

(Continued)
•Before using Bluetooth® Wireless
Technology related features of the
audio system, refer your phoneL

(Continued)
automatically connected. Even if
you are outside, the Bluetooth®
Wireless Technology phone will be
automatically connected once you
are in the vicinity of the vehicle. If
you do not want to automatically
connect your Bluetooth® Wireless
Technology phone, try the follow‐
ing.
1.Turn off the Bluetooth® Wire‐
less Technology feature in your
mobile phone.
2.Turn off the Bluetooth® Wire‐
less Technology feature in your
car audio system.
-To turn off the Bluetooth®
Wireless Technology feature
in your car audio system, go
to [êETUç] > [çhone] and
[turn off] the Bluetooth®
Wireless Technology feature.
•Bluetooth® Wireless Technology
connection may become intermit‐
tently disconnected in some mo‐
(Continued)
(Continued)
bile phones. Follow these steps to
try again.
1.Turn the Bluetooth® Wireless
Technology function within the
mobile phone off/on and try
again.
2.Turn the mobile phone power
Off/On and try again.
3.Completely remove the mobile
phone battery, reboot, and then
again.
4.éeboot the audio system and
try again.
5.Delete all paired devices, pair
and try again.
•It is possible to pair up to five
Bluetooth® Wireless Technology
devices to the car system.
•çhone contact names should be
saved in English or they may not
be displayed correctly.
•The Hands-free call volume and
quality may differ depending on
the mobile phone.
(Continued)
(Continued)
•Only one Bluetooth® Wireless
Technology device can be connec‐
ted at a time.
•In some mobile phones, starting
the ignition while talking through
Bluetooth® Wireless Technology
enabled hands-free call will result
in the call becoming disconnected.
(êwitch the call back to your mo‐
bile phone when starting the igni‐
tion.)
•If the mobile phone is not paired or
connected, it is not possible to en‐
ter çhone mode. Once a phone is
paired or connected, the guidance
screen will be displayed.
Audio system
6-64

CAUTION
•Bluetooth® Wireless TechnologyHandsfree is a feature that ena‐bles drivers to practice safe driv‐ing. Connecting the car audio sys‐
tem with a Bluetooth® WirelessTechnology phone allows the userto conveniently make calls, receivecalls, and manage the phone book.
Before using the Bluetooth® Wire‐less Technology, carefully read thecontents of this user’s manual.
•Excessive use or operations whiledriving may lead to negligent driv‐ing practices and be the cause ofaccidents.
•Do not operate the device exces‐sively while driving.
•Viewing the screen for prolongedperiods of time is dangerous andmay lead to accidents.
•When driving, view the screen onlyfor short periods of time.
NOTICE
nUsing the Voice éecognition
•When using the voice recognition
feature, only commands listed
within the user's manual are sup‐
ported.
•Be aware that during the opera‐
tion of the voice recognition sys‐
tem, pressing any key other than
the button or touching the
screen will terminate voice recog‐
nition mode.
•For superior voice recognition per‐
formance, position the microphone
used for voice recognition above
the head of the driverL

Auto êtore
çress the [Auto store] button to auto‐
matically save receivable frequencies to çreset buttons.
êcan
çress the
SCAN button to preview fre‐
quencies with superior reception for 5 seconds each.
çress and hold the
SCAN button to
preview presets for 5 seconds each.
Once scan is complete, the previous
frequency will be restored.
While êcan is operating, pressing the
SCAN button will cancel the scan oper‐
ation.
Media mode
Media mode screen
çressing the MEDIA button will change
the operating mode in order of CD
UêB (içod ®
) AUX My Music BT
Audio.
If [çop-up Mode] / [Mode çop-up] is turned on within
/SETUP [Dis‐
play], then pressing the MEDIA button
will display the Media çop-up Mode
screen.
Turn the
TUNE knob to move the fo‐
cus. çress the knob to select.
The media mode pop up screen can be
displayed only when there are two or
more media modes turned on.
Mode Display on the Status Bar
When a Bluetooth ®
Wireless Technolo‐
gy, içod ®
, UêB or AUX device is connec‐
ted or a CD is inserted, the correspond‐
ing mode icon will be displayed.
IconTitle
Bluetooth ®
WirelessTechnolo‐
gy
CD
içod ®
UêB
AUX


6-69
6
Audio system

MENU: Bluetooth® Wireless
Technology Audio
Using Bluetooth® Wireless Technology
Audio Mode
çlaying/çausing Bluetooth® WirelessTechnology Audio
Once a Bluetooth ®
Wireless Technology
device is connected, the mode will au‐
tomatically start.
While playing, press the [
II] button to
pause and press [II] button to play.
The play/pause feature may operate
differently depending on the mobile phone.
Changing Files
çress the [êEEK TéACK] button to
move to the previous or next file.
êetting Connection
If a Bluetooth ®
Wireless Technology de‐
vice has not been connected, press the
[êETUç] button [çhone] button to
display the Bluetooth ®
Wireless Tech‐
nology connection screen.
It is possible to use the pair phone, con‐
nect/disconnect and delete features
from your Bluetooth ®
Wireless Tech‐
nology phone.
If music is not yet playing from your
mobile device after converting to Blue‐
tooth ®
Wireless Technology Audio
mode, pressing the play button once
may start playing the mode. Check to
see that music is playing from the
Bluetooth ®
Wireless Technology device
after converting to Bluetooth ®
Wireless
Technology Audio Mode.
Phone Mode
Making a call using the Steering
wheel controls
❈ The actual features in the vehicle
may differ from the illustration.
1. Mutes the audio volume.
2. çress the button to change audio
source. FM
AM CD UêB (içod ®
) AUX My Music BT Audio.
(For éDê Model) FM1
FM2 FMA AM ➟
AMA CD UêB (içod ®
) AUX My Music BT Audio.
3. Used to control volume.
4. When pressed shortly

6-79
6
Audio system

- When pressed in the phonescreen, displays call history
screen
- When pressed in the dial screen, makes a call
- When pressed in the incoming call screen, answers the call
- When pressed during call wait‐ ing, switches to waiting call (Call
Waiting)
When pressed and held - When pressed in the Bluetooth ®
Wireless Technology Handsfree
wait mode, redials the last call
- When pressed during a Blue‐ tooth ®
Wireless Technology
Handsfree call, switches call backto mobile phone (çrivate)
- When pressed while calling on the mobile phone, switches call back
to Bluetooth ®
Wireless Technolo‐
gy Handsfree (Operates only
when Bluetooth ®
Wireless Tech‐
nology Handsfree is connected)
5. Ends phone call
6. (if equipped) When pressed shortly- êtarts voice recognition - When selecting during a voice
prompt, stops the prompt and
converts to voice commandwaiting state
When pressed and held - Ends voice recognition
Bluetooth® Wireless Technology
(Type B-1)
When No Devices have been Paired
1. çress the /PHONE button or
the button on the steering
wheel controls. The following
screen is displayed.
2. çress the [OK] button to enter the çair çhone screen.
• Device: Name of device as shownwhen searching from your Blue‐ tooth ®
Wireless Technology de‐
vice
• çasskey: çasskey used to pair the device
3. From your Bluetooth ®
Wireless
Technology device (i.e. Mobile
çhone), search and select your car
audio system.
Audio system
6-80

(Continued)
•Generally, most Bluetooth® Wire‐
less Technology devices will auto‐
matically connect once pairing is
complete. However, some devices
may require a separate verifica‐
tion process to connect. Check to
see whether Bluetooth® Wireless
Technology has been properly con‐
nected within your mobile phone.
•List of paired Bluetooth® Wireless
Technology devices can be viewed
at /SETUP [çhone]
[çaired çhone List].
Paired Phone List
çress the [êETUç] button êelect
[çhone] êelect [çaired çhone List]
• Connected çhone: Device that is cur‐ rently connected.
• çaired çhone: Device that is paired but not connected.
Connecting a Device
From the paired phone list, select the
device you want to connect and press the [Connect] (1) button.
Disconnecting a Device
From the paired phone list, select the
currently connected device and press the [Disconnect](2) button.
Deleting a Device
From the paired phone list, select the
device you want to delete and press
the [Delete](3) button.
NOTICE
•When deleting the currently con‐
nected device, the device will auto‐
matically be disconnected to pro‐
ceed with the deleting process.
•If a paired Bluetooth® Wireless
Technology device is deleted, the
deviceL

From the paired phone list, select the
phone you want to switch to the high‐ est priority, then press the [Change pri‐
ority](4) button. The selected device
will be changed to the highest priority.
When a device is currently connected, even if you change the priority to a dif‐
ferent device, the currently connected
phone will always be set as the highest priority.
Phone Menu Screen
çhone Menus
With a Bluetooth ®
Wireless Technology
device connected, press the
/PHONE button to display the çhone
menu screen. • Dial Number: Displays the dial screen where numbers can be dialed to
make calls. • Call History: Displays the call history
list screen.
• çhone book: Displays the çhone book list screen.
• êetup: Displays çhone related set‐ tings.
NOTICE
•If you press the [Call History] but‐
ton but there is no call history da‐
ta, a prompt is displayed which
asks whether to download call his‐
tory data.
•If you press the [çhone book] but‐
ton but there is no phone book da‐
ta, a prompt is displayed which
asks whether to download phone
book data.
•This feature may not be suppor‐
ted in some mobile phones. For
more information on download
support, refer to your mobile
phone userL