ESP KIA OPTIMA PLUG-IN HYBRID 2017 Owner's Guide

(Continued)
•When returning to Bluetooth®
Wireless Technology Audio mode
after ending a call, the mode may
not automatically restart in some
mobile phones.
•éeceiving an incoming call or mak‐
ing an outgoing call while playing
Bluetooth® Wireless Technology
Audio may result in audio interfer‐
ence.
NOTICE
nUsing the Bluetooth® Wireless
Technology Cellular çhone
•Bluetooth® Wireless Technology
Handsfree refers to a device which
allows the user to conveniently
make phone calls with Bluetooth®
Wireless Technology mobile
phones through the audio system.
(Continued)
(Continued)
•Bluetooth® Wireless Technology
allows devices to be connected in a
short distance, including handsfree
devices, stereo headsets, wireless
remote controllers, etc. For more
information, visit the
Bluetooth®
Wireless Technology website at
www.Bluetooth.com. Before using
Bluetooth® Wireless Technology
audio features.
•The Bluetooth® word mark and
logos are registered trademarks
owned by Bluetooth® êIG, Inc. and
any use of such marks by Kia is
under license. Other trademarks
and trade names are those of
their respective owners. A Blue‐
tooth® enabled cell phone is re‐
quired to use Bluetooth® Wireless
Technology.
•Bluetooth® Wireless Technology
features supported within the ve‐
(Continued)
(Continued)
hicle are as follows. êome features
may not be supported depending
on your Bluetooth® Wireless Tech‐
nology device.
-Answering and placing Blue‐
tooth® Wireless Technology
Handsfree calls
-Menu operation during call
(êwitch to çrivate, êwitch to call
waiting, Outgoing volume)
-Download Call History
-Download Mobile çhone book
-çhone book/Call History Auto
Download
-Bluetooth® Wireless Technology
device auto connection
-Bluetooth® Wireless Technology
Audio
(Continued)
Audio system
6-62

Auto êtore
çress the [Auto store] button to auto‐
matically save receivable frequencies to çreset buttons.
êcan
çress the
SCAN button to preview fre‐
quencies with superior reception for 5 seconds each.
çress and hold the
SCAN button to
preview presets for 5 seconds each.
Once scan is complete, the previous
frequency will be restored.
While êcan is operating, pressing the
SCAN button will cancel the scan oper‐
ation.
Media mode
Media mode screen
çressing the MEDIA button will change
the operating mode in order of CD
UêB (içod ®
) AUX My Music BT
Audio.
If [çop-up Mode] / [Mode çop-up] is turned on within
/SETUP [Dis‐
play], then pressing the MEDIA button
will display the Media çop-up Mode
screen.
Turn the
TUNE knob to move the fo‐
cus. çress the knob to select.
The media mode pop up screen can be
displayed only when there are two or
more media modes turned on.
Mode Display on the Status Bar
When a Bluetooth ®
Wireless Technolo‐
gy, içod ®
, UêB or AUX device is connec‐
ted or a CD is inserted, the correspond‐
ing mode icon will be displayed.
IconTitle
Bluetooth ®
WirelessTechnolo‐
gy
CD
içod ®
UêB
AUX


6-69
6
Audio system

CommandFunction
AM 530~1710 çlays the AM broadcast of the corre‐ sponding frequency. ❈éange can be different by applica‐
tion frequency of corresponding country.
TA On Enables Traffic Announcement.
TA Off Disables Traffic Announcement.
News On Enables éDê News feature.
News Off Disables éDê News feature.
Media Moves to the most recently played me‐ dia screen.
çlay Track 1~30 If a music CD has been inserted, plays the corresponding track.
CD çlays the music saved in the CD.
êearch CD Moves to the CD track or file selection screen.• For audio CDs, move to the screen and say the track number to play the
corresponding track.
• Moves to Mç3 CD file selection screen. After manually operate the device toselect and play music.
UêB çlays UêB music.
êearch UêB Moves to UêB file selection screen. Af‐ ter manually operate the device to se‐lect and play music.CommandFunction
içod ®
çlays içod®
music.
êearch içod ®
Moves to the içod ®
file selection screen.
After, manually operate the device to select and play music.
My Music çlays the music saved in My Music.
êearch My Music Moves to the My Music file selection screen. After, manually operate the de‐vice to select and play music.
AUX (Auxiliary) çlays the connected external device. Bluetooth ®
Audio çlays the music saved in connected
Bluetooth ®
Wireless Technology device.
Mute Mutes the radio or music volume.
çardon? éepeats the most recent comment.
Cancel (Exit) Ends voice command.
FM/AM radio commands
Commands available during FM, AM radio operation.
CommandFunction
çreset 1~6 çlays the broadcast saved in çreset 1~6.
Auto êtore Automatically selects radio broadcast frequencies with superior reception andsaves in çresets 1~6.
çreset êave 1~6 êaves the current broadcast frequency to çreset 1~6.

6-101
6
Audio system

❈May differ depending on the selec‐
ted audio.
Voice éecognition Mode êetting (ifequipped)
This feature is used to select the de‐ sired prompt feedback option from
Normal and Expert. • Normal: When using voice recognition, provides detailed guidance prompts
• Expert: When using voice recognition, omits some guidance prompts
Language
This feature is used to change the sys‐
tem and voice recognition language.
If the language is changed, the system will restart and apply the selected lan‐
guage. • Language support by region Dansk, Deutsch, English(UK), Español,
FranG1ais, Italiano, Nederlands,
çyccĸI

BEFORE DRIVING
Before entering vehicle
• Be sure that all windows, outsidemirror(s), and outside lights are clean.
• Check the condition of the tires.
• Check under the vehicle for any sign of leaks.
• Be sure there are no obstacles behind you if you intend to back up.
Necessary inspections
Fluid levels, such as engine oil, engine
coolant, brake fluid, and washer fluid should be checked on a regular basis,
with the exact interval depending on
the fluid. Further details are provided in Chapter 9, Maintenance.
WARNING
Driving while distracted can result ina loss of vehicle control, that maylead to an accident, severe personalinjury, and death. The driver’s pri‐mary responsibility is in the safe andlegal operation of a vehicle, and useof any handheld devices, otherequipment, or vehicle systems which
(Continued)
(Continued)
take the driver’s eyes, attention andfocus away from the safe operationof a vehicle or which are not permis‐sible by law should never be usedduring operation of the vehicle.
Before starting
• Close and lock all doors.
• Position the seat so that all controls
are easily reached.
• Adjust the inside and outside rear‐ view mirrors.
• Be sure that all lights work.
• Check all gauges.
• Check the operation of warning lights when the engine start/stop button
switch is turned to the ON position.
• Release the parking brake and make sure the brake warning light goes
out.
For safe operation, be sure you are fa‐ miliar with your vehicle and its equip‐
ment.
WARNING
All passengers must be properly bel‐ted whenever the vehicle is moving.Refer to L

(Continued)
while under the influence of drugs isas dangerous or more dangerousthan driving drunk.You are much more likely to have aserious accident if you drink or takedrugs and drive.If you are drinking or taking drugs,don’t drive. Do not ride with a driverwho has been drinking or takingdrugs. Choose a designated driver orcall a cab.
WARNING
•When you intend to park or stopthe vehicle with the engine on, becareful not to depress the acceler‐ator pedal for a long period oftime. It may overheat the engineor exhaust system and cause fire.
(Continued)
(Continued)
•When you make a sudden stop orturn the steering wheel rapidly,loose objects may drop on thefloor and it could interfere withthe operation of the foot pedals,possibly causing an accident. Keepall things in the vehicle safely stor‐ed.
•If you do not focus on driving, itmay cause an accident. Be carefulwhen operating what may disturbdriving such as audio or heater. Itis the responsibility of the driverto always drive safely.

7-05
7
Driving your vehicle

(Continued)
•Always check the surroundingareas near your vehicle for people,especially children, before shiftinga vehicle into D (Drive) or R (Re‐verse).
•Before leaving the driver’s seat, al‐ways make sure the shift lever isin the P (Park) position; then setthe parking brake fully and shutthe engine off. Unexpected andsudden vehicle movement can oc‐cur if these precautions are notfollowed in the order identified.
•Do not use the engine brake (shift‐ing from a high gear to lower gear)rapidly on slippery roads.The vehicle may slip causing an ac‐cident.
CAUTION
•To avoid damage to your trans‐axle, do not accelerate the enginein R (Reverse) or any forward gearposition with the brakes on.
(Continued)
(Continued)
•When stopped on an uphill grades,do not hold the vehicle stationarywith engine power. Use the brakepedal or the parking brake.
•Do not shift from N (Neutral) or P(Park) into D (Drive), or R (Reverse)when the engine is above idlespeed.
Transaxle ranges
The indicator lights in the instrument
cluster displays the shift lever position when the engine start/stop button
switch is in the ON position.
P (Park)
Always come to a complete stop before
shifting into P (Park). This position locks the transaxle and prevents the
front wheels from rotating.
To shift from P (Park), you must de‐
press firmly on the brake pedal and make sure your foot is off the acceler‐
ator pedal.
If you have done all of the above andstill cannot shift the lever out of P(Park), see L

Shift-lock override
If the shift lever cannot be moved from
the P (Park) position into R (Reverse) position with the brake pedal de‐
pressed, continue depressing the brake,
then do the following: 1. Place the engine start/stop button switch in the LOCK/OFF position.
2. Apply the parking brake.
3. Carefully remove the cap (1) cover‐ ing the shift-lock release access
hole.
4. Insert a tool (e.g. flathead screw‐ driver) into the access hole andpress down on the tool.
5. Move the shift lever.
6. Remove the tool from the shift- lock override access hole then in‐
stall the cap.
7. We recommend that the system be inspected by an authorized Kia
dealer.
Good driving practices
• Never move the shift lever from P (Park) or N (Neutral) to any other po‐
sition with the accelerator pedal de‐ pressed. • Never move the shift lever into P
(Park) when the vehicle is in motion.
• Be sure the vehicle is completely stopped before you attempt to shift
into R (Reverse) or D (Drive).
• Never take the vehicle out of gear and coast down a hill. This may beextremely hazardous. Always leave
the vehicle in gear when moving.
• Do not "ride" the brakes. This can cause them to overheat and malfunc‐
tion. Instead, when you are driving
down a long hill, slow down and shift to a lower gear. When you do this,
engine braking will help slow down
the vehicle.
• Slow down before shifting to a lower gear. Otherwise, the lower gear maynot be engaged.
• Always use the parking brake. Do not depend on placing the transaxle in P
(Park) to keep the vehicle from mov‐
ing. • Exercise extreme caution when driv‐
ing on a slippery surface. Be especial‐ly careful when braking, accelerating
or shifting gears. On a slippery sur‐
face, an abrupt change in vehicle
speed can cause the drive wheels to
lose traction and the vehicle to go out of control.
• Optimum vehicle performance and economy is obtained by smoothly de‐
pressing and releasing the accelera‐
tor pedal.
WARNING
•Always buckle-up! In a collision, anunbelted occupant is significantlymore likely to be seriously injuredor killed than a properly belted oc‐cupant.
•Avoid high speeds when corneringor turning.
•Do not make quick steering wheelmovements, such as sharp lanechanges or fast, sharp turns.
•The risk of rollover is greatly in‐creased if you lose control of yourvehicle at highway speeds.
(Continued)

7-15
7
Driving your vehicle

Electronic stability control (ESC)
(if equipped)
0+'
The electronic stability control (ESC)
system is designed to stabilize the ve‐ hicle during cornering maneuvers. ESC
checks where you are steering and
where the vehicle is actually going. ESC applies the brakes at individual wheels
and intervenes with engine manage‐
ment system to stabilize the vehicle.
WARNING
Never drive too fast for the roadconditions or too quickly when cor‐nering. Electronic stability control(ESC) will not prevent accidents. Ex‐cessive speed in turns, abrupt ma‐neuvers and hydroplaning on wetsurfaces can still result in serious ac‐cidents. Only a safe and attentivedriver can prevent accidents byavoiding maneuvers that cause thevehicle to lose traction. Even withESC installed, always follow all thenormal precautions for driving - in‐cluding driving at safe speed for theconditions.
The electronic stability control (ESC)
system is an electronic system de‐ signed to help the driver maintain vehi‐
cle control under adverse conditions. It
is not a substitute for safe driving practices. Factors including speed, road
conditions and driver steering input can
all affect whether ESC will be effective in preventing a loss of control. It is still
your responsibility to drive and corner
at reasonable speed and to leave a suf‐ ficient margin of safety. When you apply your brakes under
conditions which may lock the wheels,
you may hear a L

The ESC indicator light blinks whenever
ESC is operating or illuminates when ESC fails to operate.
ESC OFF indicator light comes on when
the ESC is turned off with the button.
CAUTION
Driving with varying tire or wheelsizes may cause the ESC system tomalfunction. When replacing tires,make sure they are the same size asyour original tires.
WARNING
The Electronic Stability Control sys‐tem is only a driving aid; use precau‐tions for safe driving by slowingdown on curved, snowy, or icy roads.Drive slowly and don’t attempt toaccelerate whenever the ESC indica‐tor light is blinking, or when the roadsurface is slippery.
ESC OFF usage
When driving
• ESC should be turned on for daily driving whenever possible. • To turn ESC off while driving, press
the ESC OFF button while driving on aflat road surface.
WARNING
Never press the ESC OFF buttonwhile ESC is operating (ESC indicatorlight blinks).If ESC is turned off while ESC is op‐erating, the vehicle may slip out ofcontrol.
NOTICE
•When operating the vehicle on a
dynamometer, ensure that the
ESC is turned off by pressing the
ESC OFF button for more than 3
seconds (ESC OFF light illumina‐
ted). If the ESC is left on, it may
prevent the vehicle speed from in‐
creasing, and result in false diag‐
nosis.
•Turning the ESC off does not af‐
fect ABS or brake system opera‐
tion.
Vehicle stability management
(VSM) (if equipped)
This system provides further enhance‐ments to vehicle stability and steering
responses when a vehicle is driving on a
slippery road or a vehicle detected changes in coefficient of friction be‐
tween right wheels and left wheels
when braking.
VSM operation
When the VSM is in operation, • ESC (Electronic Stability Control) ()
light will blink.
• The steering wheel may be control‐ led.
When the vehicle stability management is operating properly, you can feel a
slight pulsation in the vehicle. This is
only the effect of brake control and in‐ dicates nothing unusual.
The VSM does not operate when:
• Driving on bank road such as gradient or incline
• Driving rearward
• ESC OFF indicator light (
) remains
on the instrument cluster

7-33
7
Driving your vehicle