ECO mode KIA OPTIMA PLUG-IN HYBRID 2017 Service Manual

(Continued)
•When the içod® or AUX device
power is connected to the power
jack, playing the external device
may result in noise. In such cases,
disconnect the power connection
before use.
•êkipping or improper operation
may occur depending on the char‐
acteristics of your içod®/içhone®
device.
•If your içhone® is connected to
both the Bluetooth® Wireless
Technology and UêB, the sound
may not be properly played. In
your içhone®, select the Dock con‐
nector or Bluetooth® Wireless
Technology to change the sound
output (source).
•içod® mode cannot be operated
when the içod® cannot be recog‐
nized due to the playing of ver‐
sions that do not support commu‐
nication protocols, cases of içod®
abnormalities and defects.
(Continued)
(Continued)
•For fifth generation içod® Nano
devices, the içod® may not be rec‐
ognized when the battery level is
low. çlease charge the içod® for
use.
•êearch/play orders shown within
the içod® device may differ with
the orders shown within the audio
system.
•If the içod® malfunctions due to
an içod® device defect, reset the
içod® and try again. (To learn
more, refer to your içod® manual)
•êome içod®s may not sync with
the êystem depending on its ver‐
sion. If the Media is removed be‐
fore the Media is recognized, then
the system may not properly re‐
store the previously operated
mode. (içad charging is not sup‐
ported.)
•Beside support 1M cable when
purchasing içod®/içhone® prod‐
ucts, Long Cable cannot be recog‐
nized.
NOTICE
nUsing the Bluetooth® Wireless
Technology Audio Mode
•Bluetooth® Wireless Technology
Audio Mode can be used only when
a Bluetooth® Wireless Technology
phone has been connected.
•Bluetooth® Wireless Technology
Audio Mode will not be available
when connecting mobile phones
that do not support this feature.
•While Bluetooth® Wireless Tech‐
nology Audio is playing, if the
Bluetooth® Wireless Technology
phone is connected, then the mu‐
sic will also stop.
•Moving the Track up/down while
playing Bluetooth® Wireless Tech‐
nology audio mode may result in
pop noises in some mobile phones.
•Bluetooth® Wireless Technology
streaming audio may not be sup‐
ported in some mobile phones.
(Continued)

6-61
6
Audio system

(Continued)
automatically connected. Even if
you are outside, the Bluetooth®
Wireless Technology phone will be
automatically connected once you
are in the vicinity of the vehicle. If
you do not want to automatically
connect your Bluetooth® Wireless
Technology phone, try the follow‐
ing.
1.Turn off the Bluetooth® Wire‐
less Technology feature in your
mobile phone.
2.Turn off the Bluetooth® Wire‐
less Technology feature in your
car audio system.
-To turn off the Bluetooth®
Wireless Technology feature
in your car audio system, go
to [êETUç] > [çhone] and
[turn off] the Bluetooth®
Wireless Technology feature.
•Bluetooth® Wireless Technology
connection may become intermit‐
tently disconnected in some mo‐
(Continued)
(Continued)
bile phones. Follow these steps to
try again.
1.Turn the Bluetooth® Wireless
Technology function within the
mobile phone off/on and try
again.
2.Turn the mobile phone power
Off/On and try again.
3.Completely remove the mobile
phone battery, reboot, and then
again.
4.éeboot the audio system and
try again.
5.Delete all paired devices, pair
and try again.
•It is possible to pair up to five
Bluetooth® Wireless Technology
devices to the car system.
•çhone contact names should be
saved in English or they may not
be displayed correctly.
•The Hands-free call volume and
quality may differ depending on
the mobile phone.
(Continued)
(Continued)
•Only one Bluetooth® Wireless
Technology device can be connec‐
ted at a time.
•In some mobile phones, starting
the ignition while talking through
Bluetooth® Wireless Technology
enabled hands-free call will result
in the call becoming disconnected.
(êwitch the call back to your mo‐
bile phone when starting the igni‐
tion.)
•If the mobile phone is not paired or
connected, it is not possible to en‐
ter çhone mode. Once a phone is
paired or connected, the guidance
screen will be displayed.
Audio system
6-64

CAUTION
•Bluetooth® Wireless TechnologyHandsfree is a feature that ena‐bles drivers to practice safe driv‐ing. Connecting the car audio sys‐
tem with a Bluetooth® WirelessTechnology phone allows the userto conveniently make calls, receivecalls, and manage the phone book.
Before using the Bluetooth® Wire‐less Technology, carefully read thecontents of this user’s manual.
•Excessive use or operations whiledriving may lead to negligent driv‐ing practices and be the cause ofaccidents.
•Do not operate the device exces‐sively while driving.
•Viewing the screen for prolongedperiods of time is dangerous andmay lead to accidents.
•When driving, view the screen onlyfor short periods of time.
NOTICE
nUsing the Voice éecognition
•When using the voice recognition
feature, only commands listed
within the user's manual are sup‐
ported.
•Be aware that during the opera‐
tion of the voice recognition sys‐
tem, pressing any key other than
the button or touching the
screen will terminate voice recog‐
nition mode.
•For superior voice recognition per‐
formance, position the microphone
used for voice recognition above
the head of the driverL

Auto êtore
çress the [Auto store] button to auto‐
matically save receivable frequencies to çreset buttons.
êcan
çress the
SCAN button to preview fre‐
quencies with superior reception for 5 seconds each.
çress and hold the
SCAN button to
preview presets for 5 seconds each.
Once scan is complete, the previous
frequency will be restored.
While êcan is operating, pressing the
SCAN button will cancel the scan oper‐
ation.
Media mode
Media mode screen
çressing the MEDIA button will change
the operating mode in order of CD
UêB (içod ®
) AUX My Music BT
Audio.
If [çop-up Mode] / [Mode çop-up] is turned on within
/SETUP [Dis‐
play], then pressing the MEDIA button
will display the Media çop-up Mode
screen.
Turn the
TUNE knob to move the fo‐
cus. çress the knob to select.
The media mode pop up screen can be
displayed only when there are two or
more media modes turned on.
Mode Display on the Status Bar
When a Bluetooth ®
Wireless Technolo‐
gy, içod ®
, UêB or AUX device is connec‐
ted or a CD is inserted, the correspond‐
ing mode icon will be displayed.
IconTitle
Bluetooth ®
WirelessTechnolo‐
gy
CD
içod ®
UêB
AUX


6-69
6
Audio system

MENU: Audio CD
Audio CD mode display controls
• Type B-1
• Type B-2
1.Mode
Displays currently operating mode. 2.
Operation êtate
From éepeat/éandom (êhuffle)/
êcan, displays the currently operat‐
ing function.
3.
Track Info
Displays information about the cur‐
rent track.
4.
çlay/çause
Changes the play/pause state.
5.
çlay Time
Displays the current play time.
6.
Info
êhows detailed information about
the current track.
7.
éandom (êhuffle)
Turns the éandom (êhuffle) feature on/off.
8.
éepeat
Turns the éepeat feature on/off.
9.
List
Moves to the list screen.
Turn the
TUNE knob left/right to
search for tracks. Once the desired
track is displayed, press the knob
to select and play.
With the Audio CD Mode
çlaying/çausing CD Tracks
Once an audio CD is inserted, the mode
will automatically start and begin play‐
ing.
While playing, press the [II] button to
pause and press [
] button to play.
Only genuine audio CDs are supported.
Other discs may result in recognition failure (e.g. copy CD-é, CDs with labels)
The artist and title information are dis‐
played on the screen if track informa‐
tion is included within the audio CD.
Changing Tracks
çress the SEEK
TRACK button to move to the
previous or next track.
çressing the
SEEK
TRACK button after the
track has been playing for 2 seconds
will start the current track from the
beginning.
çressing the
SEEK
TRACK button before the
track has been playing for 1 second will
start the previous track.
Audio system
6-70

êelecting from the List
Turn the TUNE knob left/right to
search for the desired track.
Once you find the desired track, press the
TUNE knob to start playing.
éewinding / Fast-forwarding Tracks
While playing, press and hold the SEEK
TRACK
button to rewind or fast-forward the
current track.
êcan (With éDê)
çress and hold the button to play
the file 10 seconds of each file.
çress and hold the
button again
to turn off.
êcan (Without éDê)
çress the SCAN button to play the first
10 seconds of each file.
çress and hold the
SCAN button again
to turn off.
MENU : MP3 CD
Mç3 CD mode display controls
• Type B-1
• Type B-2
1.Mode
Displays currently operating mode. 2.
Operation êtate
From éepeat/éandom (êhuffle)/
êcan, displays the currently operat‐
ing function.
3.
File Index
Displays the current file number.
4.
File Info
Displays information about the cur‐
rent file.
5.
çlay/çause
Changes the play/pause state.
6.
çlay Time
Displays the current play time.
7.
Info
êhows detailed information about
the current file.
When the L

çressing the SEEK
TRACK button after the
song has been playing for 2 seconds
will start the current song from the be‐
ginning.
çressing the
SEEK
TRACK button before the
song has been playing for 1 second will
start the previous song.
êlight time differences may exist de‐
pending your içod ®
product.
éewinding / Fast-forwarding êongs
While playing, press and hold the SEEK
TRACK
button to rewind or fast-forward the
current song.
• Type B-1
• Type B-2
êearching Categories
Turn the TUNE knob left/right to
search for the desired category.
Once you find the desired category, press the
TUNE knob to select and
play.
There are eight categories that can be
searched, including çlaylists, Artists, Al‐ bums, Genres, êongs, Composers, Au‐
diobooks and çodcasts.
Category Menu
1. Displays the play screen. 2. Moves to the içod ®
root category
screen.
3. Moves to the previous category.
If the search mode is accessed while
playing a song, the most recently searched category is displayed. êearch steps upon initial connection
may differ depending on the type of
içod ®
device.
MENU: AUX
AUX Mode Display Controls
• Type B-1
• Type B-2
çress the MEDIA button êelect [AUX]
Audio system
6-76

An external device can be connected to
play music.
Connecting an external device
External audio players (Camcorders, car VCé, etc.) can be played through a
dedicated cable.
If an external device connector is con‐
nected with the AUX terminal, then AUX mode will automatically operate.
Once the connector is disconnected, the
previous mode will be restored.
AUX mode can be used only when an external audio player (camcorder, car
VCé, etc.) has been connected.
The AUX volume can be controlled sep‐
arately from other audio modes.
Connecting a connector jack to the AUX terminal without an external device will
convert the system to AUX mode, but
only output noise. When an external device is not being used, also remove
the connector jack.
When the external device power is con‐
nected to the power jack, playing the external device may output noise. In
such cases, disconnect the power con‐
nection before use.
Fully insert the AUX cable to the AUX jack upon use.
MENU: My Music mode
My Music mode display controls
• Type B-1
• Type B-2
1.Mode
Displays currently operating mode. 2.
Operation êtate
From éepeat/éandom(êhuffle)/
êcan, displays the currently operat‐
ing function.
3.
File Index
Displays the current file/total num‐
ber of files.
4.
File Info
Displays information about the cur‐
rent file.
5.
çlay/çause
Changes the play/pause state.
6.
çlay Time
Displays the current play time.
7.
Info
Displays detailed information for
the current file.
The title, artist and album info are
displayed only when such informa‐
tion is recorded within the Mç3 file ID3 tag.
8.
éandom(êhuffle)
Turns the éandom(êhuffle) feature
on/off.
9.
éepeat
Turns the éepeat feature on/off.
10.
Delete
Deletes the current file.

6-77
6
Audio system

11.List
Moves to the list screen.
Turn the
TUNE knob left/right to
search for files. Once the desired
file is displayed, press the
knob
to select and play.
With the My Music mode
çlaying/çausing My Music Files
While playing, press the [II] button to
pause and press [
] button to play.
If there are no files saved within My
Music, the [My Music] button will be disabled.
Changing Files
çress the SEEK
TRACK button to move to the
previous or next file.
çressing the
SEEK
TRACK button after the file
has been playing for 2 seconds will
start the current file from the begin‐
ning.
çressing the
SEEK
TRACK button before the
file has been playing for 1 second will
start the previous file. • Type B-1
• Type B-2
êelecting from the List
Turn the TUNE knob left/right to
search for the desired file.
Once you find the desired file, press the
TUNE knob to start playing.
From the List screen, it is possible to
delete files you previously saved into My Music.
List Menu
1. Moves to the previous screen.
2. êelects all files.
3. Deselects all selected files.
4. Deletes selected files.
After selecting the files you want to
delete, press the [Delete] button to de‐
lete the selected files.
If there is memory available, up to 6,000 files can be saved. Identical files
cannot be copied more than 1,000
times.
To check memory information, go to [êETUç]
[êystem] [Memory Infor‐
mation]
éewinding/Fast-forwarding Files
While playing, press and hold the SEEK
TRACK
button to rewind or fast-forward the
current file.
êcan (With éDê)
çress and hold the button to play
the file 10 seconds of each file.
çress and hold the
button again
to turn off.
êcan (Without éDê)
çress the SCAN button to play the first
10 seconds of each file.
çress the
SCAN button again to turn
off.
Audio system
6-78

- When pressed in the phonescreen, displays call history
screen
- When pressed in the dial screen, makes a call
- When pressed in the incoming call screen, answers the call
- When pressed during call wait‐ ing, switches to waiting call (Call
Waiting)
When pressed and held - When pressed in the Bluetooth ®
Wireless Technology Handsfree
wait mode, redials the last call
- When pressed during a Blue‐ tooth ®
Wireless Technology
Handsfree call, switches call backto mobile phone (çrivate)
- When pressed while calling on the mobile phone, switches call back
to Bluetooth ®
Wireless Technolo‐
gy Handsfree (Operates only
when Bluetooth ®
Wireless Tech‐
nology Handsfree is connected)
5. Ends phone call
6. (if equipped) When pressed shortly- êtarts voice recognition - When selecting during a voice
prompt, stops the prompt and
converts to voice commandwaiting state
When pressed and held - Ends voice recognition
Bluetooth® Wireless Technology
(Type B-1)
When No Devices have been Paired
1. çress the /PHONE button or
the button on the steering
wheel controls. The following
screen is displayed.
2. çress the [OK] button to enter the çair çhone screen.
• Device: Name of device as shownwhen searching from your Blue‐ tooth ®
Wireless Technology de‐
vice
• çasskey: çasskey used to pair the device
3. From your Bluetooth ®
Wireless
Technology device (i.e. Mobile
çhone), search and select your car
audio system.
Audio system
6-80