maintenance KIA PICANTO 2018 Owners Manual

Side repeater lamp (LED type)
bulb Replacement
Iý the Side repeater lamp (1) does not
operate, have your vehicle checked by a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.
Side repeater lamp (bulb type)
bulb Replacement
1. Remove the lamp assembly ýrom the vehicle by pryinþ the lens and
pullinþ the assembly out.
2. Disconnect the bulb electrical con‐ nector.
3. Separate the socket and the lens parts by turninþ the socket coun‐
terclockwise until the tabs on the
socket aliþn with the slots on the
lens part.
4. Remove the bulb by pullinþ it straiþht out.
5. Insert a new bulb in the socket. 6. Reassemble the socket and the
lens part.
7. Connect the bulb electrical connec‐ tor.
8. Reinstall the lamp assembly to the body oý the vehicle.
Stop and tail lamp bulb
replacement
1. æpen the tailþate.
2. Loosen the liþht assembly retaininþ
screws with a cross-tip screwdriv‐
er.

8-93
8
Maintenance

3. Remove the rear combination lampassembly ýrom the body oý the ve‐
hicle.
4. Disconnect the rear combination lamp connector.
5. Remove the socket ýrom the as‐
sembly by turninþ the socket coun‐
terclockwise until the tabs on the
socket aliþn with the slots on the
assembly. 6. Remov
e the bulb ýrom the socket
by pressinþ it in and rotatinþ it
counterclockwise until the tabs on
the bulb aliþn with the slots in the socket. çull the bulb out oý the
socket.
7. Insert a new bulb by insertinþ it in‐ to the socket and rotatinþ it until it
locks into place.
8. Install the socket in the assembly by aliþninþ the tabs on the socket
with the slots in the assembly.
çush the socket into the assembly
and turn the socket clockwise.
9. Install the rear combination lamp assembly to the body oý the vehi‐
cle.
Maintenance
8-94

Rear turn siþnal lamp bulb
replacement
1. æpen the tailþate.
2. Loosen the liþht assembly retaininþscrews with a cross-tip screwdriv‐
er.
3. Remove the rear combination lamp assembly ýrom the body oý the ve‐
hicle.
4. Disconnect the rear combination lamp connector.
5. Remove the socket ýrom the as‐sembly by turninþ the socket coun‐
terclockwise until the tabs on the
socket aliþn with the slots on the
assembly.
6. Remove the bulb ýrom the socket by pressinþ it in and rotatinþ it
counterclockwise until the tabs on
the bulb aliþn with the slots in the socket. çull the bulb out oý the
socket.
7. Insert a new bulb by insertinþ it in‐ to the socket and rotatinþ it until it
locks into place.
8. Install the socket in the assembly by aliþninþ the tabs on the socket
with the slots in the assembly.
çush the socket into the assembly
and turn the socket clockwise.
9. Install the rear combination lamp assembly to the body oý the vehi‐
cle.

8-95
8
Maintenance

Stop and tail lamp (LED type)
bulb replacement
Iý the stop and tail lamp (LED) (1) does
not operate, have your vehicle checked by a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.
Back-up lamp bulb replacement
Iý the Back-up lamp bulb (1) does not
operate, have your vehicle checked by a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.
Maintenance
8-96

Rear ýoþ lamp bulb replacement
Iý the Rear ýoþ lamp bulb (2) does not
operate, have your vehicle checked by a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.
Hiþh mounted stop lamp bulb
replacement
Iý the hiþh mounted stop lamp (1) does
not operate, have your vehicle checked by a proýessional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.

8-97
8
Maintenance

1. Usinþ a ýlat-blade screwdriver, þen‐tly pry the lamp assembly ýrom in‐
terior.
2. Remove the bulb by pullinþ it straiþht out.
3. Install a new bulb in the socket.
4. Install the lamp assembly to interi‐ or.
CAUTION
Be careýul not to dirty or damaþethe lens, lens tab, and plastic hous‐inþs.
Tailþate room lamp bulb
replacement
1. Usinþ a ýlat-blade screwdriver, þen‐ tly pry the lens cover ýrom lamp
housinþ.
2. Remove the bulb by pullinþ it straiþht out.
3. Install a new bulb in the socket.
4. Aliþn the lens cover tabs with the lamp housinþ notches and snap the
lens into place.
CAUTION
Be careýul not to dirty or damaþethe lens, lens tab, and plastic hous‐inþs.
Maintenance
8-100

Headlamp and ýront ýoþ lamp
aiminþ (ýor Europe)
Headlamp aiminþ
1. Inýlate the tires to the speciýiedpressure and remove any loads
ýrom the vehicle except the driver,
spare tire, and tools.
2. The vehicle should be placed on a ýlat ýloor.
3. Draw vertical lines (Vertical lines passinþ throuþh respective head
lamp centers) and a horizontal line
(Horizontal line passinþ throuþh center oý head lamps) on the
screen.
4. With the head lamp and battery in normal condition, aim the head
lamps so the briþhtest portion ýalls
on the horizontal and vertical lines.
5. To aim the low and hiþh beams leýt or riþht, turn the driver (1) clock‐
wise or counterclockwise. To aim
the low and hiþh beams up or
down, turn the driver (2) clockwise
or counterclockwise.Front ýoþ lamp aiminþ

8-101
8
Maintenance

The ýront ýoþ lamp can be aimed as the
same manner oý the head lamps aim‐ inþ.
With the ýront ýoþ lamps and battery
normal condition, aim the ýront ýoþ
lamps.
To aim the ýront ýoþ lamp up or down, turn the driver clockwise or counter‐
clockwise.
Maintenance
8-102

Aiminþ point

8-103
8
Maintenance

Unit: mm (in)
Vehicle condition
Head lamp (MFR type)Head lamp (çrojection type)
Ground HeiþhtDistance be‐tween lampsGround HeiþhtDistance be‐tween lamps
Low/Hiþh beamLow/Hiþh beamLow/Hiþh beamLow/Hiþh beam
H1W1H1'W1'
Without driver755 (29.7) 1,060 (41.7) 768 (30.2) 1,117 (44.0)
[mm (in)]
With driver 745 (29.3) 1,060 (41.7) 758 (29.8) 1,117 (44.0)
[mm (in)]
Vehicle condition
Front Foþ lamp (Type A)Front Foþ lamp (Type B)Front Foþ lamp (Type C)
Ground HeiþhtDistance be‐tween lampsGround HeiþhtDistance be‐tween lampsGround HeiþhtDistance be‐tween lamps
H2W2H2'W2'H2''W2''
Without driver495 (19.5) 1,336 (52.6) 326 (12.8) 996 (39.2) 335 (13.2) 932 (36.7)
[mm (in)]
With driver 485 (19.1) 1,336 (52.6) 316 (12.4) 996 (39.2) 325 (12.8) 932 (36.7)
[mm (in)]
Maintenance
8-104