ECO mode KIA PICANTO 2018 User Guide
[x] Cancel search | Manufacturer: KIA, Model Year: 2018, Model line: PICANTO, Model: KIA PICANTO 2018Pages: 504, PDF Size: 12.43 MB
Page 254 of 504

ISG (IDLE STOP AND GO) SYSTEM (IF EQUIPPED)
Your vehicle may be equipped with the
ISG system, which reduces ýuel con‐
sumption by automatically shuttinþ
down the enþine, when the vehicle is at
a standstill. (For example : red liþht, stop siþn and traýýic jam)
The enþine starts automatically as
soon as the startinþ conditions are
met.
The ISG system is æN whenever the en‐ þine is runninþ.
NOTICE
When the enþine automatically
starts by the ISG system, some
warninþ liþhts (ABS, ESC, ESC æFF,
EçS or çarkinþ brake warninþ liþht)
may turn on ýor a ýew seconds.
This happens because oý low battery
voltaþe. It does not mean the sys‐
tem has malýunctioned.
Auto stop
To stop the enþine in idle stop
mode
Manual transaxle
1. Decr ease the vehicle speed to less
than 5 km/h.
2. Shiýt into N (Neutral) position.
3. Release the clutch pedal.
Automatic transaxle
1. Decrease the vehicle speed to less than 5 km/h.
2. çress the brake pedal. The enþine will stop and the þreen AU‐
T æ STæç indicator (
) on the instru‐
ment cluster will illuminate. Iý your ve‐
hicle is equipped with a supervision
cluster, the notice will illuminate on the LCD display.
Drivinþ your vehicle
6-16
Page 257 of 504

ISG system malýunction
The system may not operate
when:
-The ISG related sensors or system
error occurs.
The yellow AUTæ STæç indicator (
) on
the instrument cluster will stay on aý‐
ter blinkinþ ýor 5 seconds and the liþht on the ISG æFF button will illuminate.
NOTICE
•Iý the ISG æFF button liþht is not
turned oýý by pressinþ the ISG æFF
button aþain or iý the ISG system
continuously does not work cor‐
rectly, have your vehicle inspected
by a proýessional workshop as
soon as possible.
Kia recommends to contact an au‐
thorized Kia dealer/service part‐
ner.
•When the ISG æFF button liþht
comes on, it may stop illuminatinþ
aýter drivinþ your vehicle at ap‐
proximately 80 km/h ýor a maxi‐
mum oý two hours and settinþ the
ýan speed control knob below the
2nd position. Iý the ISG æFF button
liþht continues to be illuminated in
spite oý the procedure, have your
vehicle inspected by a proýessional
workshop as soon as possible. Kia
recommends to contact an au‐
thorized Kia dealer/service part‐
ner.
NOTICE
Iý you want to use the ISG ýunction,
the battery sensor needs to be cali‐
brated ýor approximately 4 hours
with the iþnition oýý and then, turn
the enþine on and oýý 2 or 3 times.
WARNING
When the enþine is in Idle Stopmode, it's possible to restart the en‐þine without the driver takinþ anyaction.Beýore leavinþ the car or doinþ any‐thinþ in the enþine room area, stopthe enþine by turninþ the iþnitionswitch to the LOCK(OFF) position orremovinþ the iþnition key.
6-19
6
Drivinþ your vehicle
Page 297 of 504

ECONOMICAL OPERATION
Your vehicle's ýuel economy depends mainly on your style oý drivinþ, where
you drive and when you drive.
Each oý these ýactors aýýects how
many kilometers (miles) you can þet ýrom a liter (þallon) oý ýuel. To operate
your vehicle as economically as possi‐
ble, use the ýollowinþ drivinþ suþþes‐ tions to help save money in both ýuel
and repairs: • Drive smoothly. Accelerate at a mod‐ erate rate. Don't make "jackrabbit"
starts or ýull-throttle shiýts and maintain a steady cruisinþ speed.
Don't race between stopliþhts. Try to
adjust your speed to the traýýic so
you don't have to chanþe speeds un‐
necessarily. Avoid heavy traýýic whenever possible.
Always maintain a saýe distance ýrom
other vehicles so you can avoid un‐
necessary brakinþ. This also reduces
brake wear.
• Drive at a moderate speed. The ýast‐ er you drive, the more ýuel your vehi‐cle uses. Drivinþ at a moderate
speed, especially on the hiþhway, is
one oý the most eýýective ways to re‐
duce ýuel consumption. • Don't "ride" the brake pedal. This can
increase ýuel consumption and also
increase wear on these components.
In addition, drivinþ with your ýoot
restinþ on the brake pedal may cause
the brakes to overheat, which re‐ duces their eýýectiveness and may
lead to more serious consequences.
• Take care oý your tires. Keep them inýlated to the recommended pres‐
sure. Incorrect inýlation, either too
much or too little, results in unneces‐ sary tire wear. Check the tire pres‐
sures at least once a month.
• Be sure that the wheels are aliþned correctly. Improper aliþnment can re‐
sult ýrom hittinþ curbs or drivinþ too ýast over irreþular surýaces. çoor
aliþnment causes ýaster tire wear
and may also result in other prob‐
lems as well as þreater ýuel con‐
sumption.
• Keep your car in þood condition. For better ýuel economy and reduced
maintenance costs, maintain your car
in accordance with the maintenance
schedule in L
Page 319 of 504

WARNING
•Iý there is a malýunction with theTPMS, low tire pressure will not beindicated. In this case, have thesystem serviced by a proýessionalworkshop. Kia recommends to visitan authorized Kia dealer/servicepartner.
•Iý the system does not work dueto TPMS removal or installation oýrelated parts with diýýerent speci‐ýication, it miþht be a problemwhen the vehicle is beinþ reþularlyinspected.
•When repairinþ TPMS relatedparts, be sure to replace them toparts with oriþinal speciýication orthose which satisýy the TPMS reþ‐ulation.-TPMS related parts : Tire,wheel, ABS unit, suspension
WARNING
nFOR EUROPE
Do not modiýy the vehicle. It may in‐terýere with the TPMS ýunction.
(Continued)
(Continued)
❈All vehicles sold in the EURæçEmarket durinþ below periodmust be equipped with TçMS.-New model vehicle : Nov. 1,2012 ~
-Current model vehicle : Nov. 1,2014~(Based on vehicle reþis‐trations)
Reýerence : Indicator Liþht
Status
StatusSymbol
Low çressure
System Malýunc‐ tion
Settinþ
7-11
7
What to do in an emerþency
Page 395 of 504

❈The actual battery label in the vehi‐
cle may diýýer ýrom the illustration.
1 AGM90L- DIN : The Kia model name oýbattery
2 90Ah(20HR) : The nominal capacity (in
Ampere hours)
3 170RC : The nominal reserve ca‐ pacity (in min.)
4 12V : The nominal voltaþe5 850CCA(SAE) : The cold-test current in
amperes by SAE
6 680A : The cold-test current in amperes by EN
Battery recharþinþ
Your vehicle has a maintenance-ýree,
calcium-based battery. • Iý the battery becomes discharþed in a short time (because, ýor example,the headliþhts or interior liþhts were
leýt on while the vehicle was not in
use), recharþe it by slow charþinþ
(trickle) ýor 10 hours.
• Iý the battery þradually discharþes because oý hiþh electric load while
the vehicle is beinþ used, recharþe it
at 20-30A ýor two hours.
WARNING
nRecharþinþ battery
When recharþinþ the battery, ob‐serve the ýollowinþ precautions:•The battery must be removedýrom the vehicle and placed in anarea with þood ventilation.
•Do not allow ciþarettes, sparks, orýlame near the battery.
•Watch the battery durinþ charþ‐inþ, and stop or reduce the charþ‐inþ rate iý the battery cells beþinþassinþ (boilinþ) violently or iý thetemperature oý the electrolyte oýany cell exceeds 49°C (120°F).
•Wear eye protection when check‐inþ the battery durinþ charþinþ.
•Disconnect the battery charþer inthe ýollowinþ order.1.Turn oýý the battery charþermain switch.
2.Unhook the neþative clampýrom the neþative battery ter‐minal.
3.Unhook the positive clamp ýromthe positive battery terminal.
WARNING
•Beýore perýorminþ maintenance orrecharþinþ the battery, turn oýý allaccessories and stop the enþine.
•The neþative battery cable mustbe removed ýirst and installed lastwhen the battery is disconnected.
•Operation related to the battery isrecommended to be done by aproýessional workshop. Kia recom‐mends to visit an authorized Kiadealer/service partner.
CAUTION
•Keep the battery away ýrom wa‐ter or any liquid.
•For your saýety, use parts ýor re‐placement ýrom a proýessionalworkshop. Kia recommends to visitan authorized Kia dealer/servicepartner.
Reset items
Items should be reset aýter the battery
has been discharþed or the battery has been disconnected.
• Auto up/down window
8-55
8
Maintenance
Page 408 of 504

(Continued)
Do not try remodelinþ the vehicle in
any way. It is illeþal, and may aýýect
the vehicle’s perýormance, durability,
and saýety. Warranty is also not
provided ýor problems caused by re‐
modelinþ.
Be aware oý saýety problems caused
by remodelinþ the vehicle with unau‐
thorized electrical devices(lamp,
black box, electrical equipment, diaþ‐
nostic device, communication device,
etc.). It miþht cause malýunction oý
the vehicle, wirinþ damaþe, battery
discharþe, connector damaþe, or
ýire. the vehicle or cause ýire.
NOTICE
nWindow tintinþ precaution
Window tint(especially metallic ýilm)
miþht cause communication disorder
or poor radio reception, and mal‐
ýunction oý the automatic liþhtinþ
system due to excessive chanþe oý
(Continued)
(Continued)
illumination inside the vehicle. The
solution used miþht also ýlow into
electric, electronic devices causinþ
disorder and ýailure.
Inner panel ýuse replacement
1. Turn the iþnition switch and all oth‐er switches oýý.
2. æpen the ýuse panel cover.
3. çull the suspected ýuse straiþht out. Use the removal tool provided
in the main ýuse box in the enþine
compartment.
4. Check the removed ýuse; replace it iý it is blown.
Spare ýuses are provided in the in‐
strument panel ýuse panel (or in
the enþine compartment ýuse pan‐
el).
5. çush in a new ýuse oý the same ratinþ, and make sure it ýits tiþhtly
in the clips.
Iý it ýits loosely, consult a proýessional
workshop. Kia recommends to consult an authorized Kia dealer/service part‐
ner.
Maintenance
8-68
Page 453 of 504

Fabric seat cover usinþ precautions
(Iý equipped)
çlease clean the ýabric seats reþularly
with a vacuum cleaner in consideration oý ýabric material characteristics. Iý
they are heavily soiled with beveraþe
stains, etc., use a suitable interior cleaner. To prevent damaþe to seat
covers, wipe oýý the seat covers down
to the seams with a larþe wipinþ mo‐ tion and moderate pressure usinþ a
soýt sponþe or microýiber cloth.
Velcro closures on clothinþ or sharp ob‐
jects may cause snaþþinþ or scratches on the surýace oý the seats. Make sure
not to rub such objects aþainst the sur‐
ýace.
Cleaninþ the upholstery and
interior trim
Vinyl
Remove dust and loose dirt ýrom vinyl
with a whisk broom or vacuum cleaner. Clean vinyl surýaces with a vinyl clean‐
er.
Fabric
Remove dust and loose dirt ýrom ýabric
with a whisk broom or vacuum cleaner. Clean with a mild soap solution recom‐
mended ýor upholstery or carpets. Re‐
move ýresh spots immediately with a ýabric spot cleaner. Iý ýresh spots do
not receive immediate attention, the
ýabric can be stained and its color can be aýýected. Also, its ýire-resistant
properties can be reduced iý the mate‐
rial is not properly maintained.
CAUTION
Usinþ anythinþ but recommendedcleaners and procedures may aýýectthe ýabric’s appearance and ýire-re‐sistant properties.
Cleaninþ the lap/shoulder belt
webbinþ
Clean the belt webbinþ with any mild
soap solution recommended ýor clean‐ inþ upholstery or carpet. Follow the in‐
structions provided with the soap. Do
not bleach or re-dye the webbinþ be‐ cause this may weaken it.
Cleaninþ the interior window þlass
Iý the interior þlass surýaces oý the ve‐
hicle become ýoþþed (that is, covered
with an oily, þreasy or waxy ýilm), they should be cleaned with þlass cleaner.
Follow the directions on the þlass
cleaner container.
CAUTION
Do not scrape or scratch the insideoý the rear window. This may resultin damaþe to the rear window de‐ýroster þrid.
8-113
8
Maintenance
Page 489 of 504

ISG (Idle Stop and Go) system...................................... 6-16Auto start.................................................................... 6-17
Auto stop..................................................................... 6-16
Condition oý ISG system operation.......................... 6-18
ISG system deactivation............................................6-18
ISG system malýunction............................................ 6-19
K
Key positions................................................................... 6-06 Cold start support system (Flex ýuel vehicle,ýor Brazil and çaraþuay).......................................... 6-09
Iþnition switch position.............................................. 6-06
Startinþ the enþine.................................................... 6-07
Stoppinþ the Enþine................................................... 6-08
Keys...................................................................................4-04
Immobilizer system....................................................4-05
Key operations............................................................ 4-04
Record your key number...........................................4-04
L
LCD windows....................................................................4-50 LCD modes................................................................... 4-54
æver view..................................................................... 4-50
Service mode............................................................... 4-55
Trip inýormation (Trip computer).............................4-50 User settinþs mode.................................................... 4-55
Liþht bulbs........................................................................ 8-83
Back-up lamp bulb replacement.............................. 8-96
Bulb replacement precaution................................... 8-83
DRL (Bulb type) bulb replacement........................... 8-92
Front ýoþ lamp bulb replacement............................ 8-91
Front turn siþnal lamp bulb (LED type) re‐placement................................................................... 8-91
Front turn siþnal lamp bulb replacement (Headlamp Type A).................................................... 8-89
Glove box lamp bulb replacement............................8-99
Headlamp (Low/Hiþh beam) bulb replace‐ ment (Headlamp Type A)......................................... 8-88
Headlamp (Low/Hiþh beam) bulb replace‐ ment (Headlamp Type B)......................................... 8-90
Headlamp and ýront ýoþ lamp aiminþ (ýor Europe)......................................................................8-101
Hiþh mounted stop lamp bulb replacement...........8-97
License plate lamp bulb replacement......................8-98
Liþht bulb position (Front)........................................ 8-85
Liþht bulb position (Rear).......................................... 8-86
Liþht bulb position (Side)........................................... 8-87
Map lamp bulb replacement..................................... 8-98
çosition lamp + DRL (LED type) bulb replace‐ ment............................................................................ 8-92
çosition lamp bulb replacement (Headlamp Type A)........................................................................ 8-89
Rear ýoþ lamp bulb replacement............................. 8-97
Alphabetical index
I-5
Alphabetical index