instrument cluster KIA RIO 2022 Features and Functions Guide

12†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDRIO FEATURES & FUNCTIONS GUIDE
ADAS
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
Lane Following Assist (LFA)*†4
REMINDERS:
• If the ignition is cycled, LFA returns to its previous state, on or off, if activated in the User Set tings menu . If using the Steering Wheel LFA but ton, then LFA defaults to off
• LFA is not a substitute for safe and proper driving . Always drive safely and use caution
• LFA may not always aler t the driver when the vehicle is approaching another vehicle
Lane Following Assist (LFA) is designed to help ensure that the vehicle stays centered in its lane A by monitoring the detected lane markings ahead and adjusting the steering . The instrument cluster indicator will initially illuminate white when turned ON . It will remain white when the system does not detect the lane markers . When the system detects the lane markers and can assist the steering, the LFA icon will illuminate green B .
When LFA is enabled in the User or Vehicle Settings*, press the LFA button C on the Steering Wheel to turn LFA on or off .
LFA will operate only when these conditions are met:
•LK A recognizes both sides of the lane markers the vehicle is traveling in
•
The vehicle is traveling slower than 95 mph
LFA User Settings:
•To go to User Settings in the Instrument Cluster, press the Mode button D on the Steering Wheel when the vehicle is at a standstill, gear shift is in Park and with the ignition on or the Engine Start/Stop button* in the ON position, and select User Settings
•
To enable LFA , when in User Settings, press the Move (OK) button E up/down and Select Driver Assistance then Driving Assist, Select Lane Following Assist . Press the OK button E
•
Some models access settings through the Vehicle Settings in the audio head unit . Press the SETUP hard key on the audio head unit, then VEHICLE on the screen to enter Vehicle Settings
•
Some vehicles have a Lane Driving Assist / Lane Safety button* on the Driver ’s Panel or the Steering Wheel . Press to activate Lane Following Assist after enabled in the User Settings / Vehicle Settings*
Images are for illustrative purposes only and may not reflect actual feature or operation .
When engaged, LFA is supplemental . Do not solely rely on this system and always pay at tention to the road and its conditions .
Actual User Set tings steps may var y by model . See section 5 in the Owner ’s Manual for more detailed information, limitations and conditions .
(Type B shown; located on the right side of the Steering Wheel)
OK
R ES+
SET
-
CANCEL
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Lane Following Assist(LFA) Video
QR CODE
A
B
C
D
E
The LFA Warning Volume can be adjusted in the User Set tings in the Instrument Cluster or the Vehicle Set tings* on the audio head unit
QUICK TIP

ADAS
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
Check rear seats
: Alarm OffOK
Rear Occupant Alert (ROA) with Door Monitoring†1 1
The Rear Occupant Alert (ROA) with Door Monitoring can help alert the driver when a rear passenger may be left in the vehicle
. The alert will be a message on the Instrument Cluster stating to “Check rear seats” A and a chime will sound .
The factory default is set to OFF . To turn the system ON or OFF, go to User Settings in the Instrument cluster or Vehicle Settings*, on the audio head unit, select Convenience, then Rear Occupant Alert and check/uncheck the box .
REMINDER: Always be sure to check the passenger areas before leaving the vehicle .
When engaged, ROA is not a substitute for one’s at tention . Always check the vehicle’s interior before exiting .
Refer to section 4 in the Owner ’s Manual for more information .
Images are for illustrative purposes only and may not reflect actual feature or operation .Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Rear Occupant Alert (ROA) with Door Monitoring Video
QR CODE
A
14†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDRIO FEATURES & FUNCTIONS GUIDE

Instrument Cluster Control
Press switch A up or down to adjust display brightness of the instrument panel illumination .
REMINDER: The Instrument Cluster Control does not adjust brightness on the audio control unit screen . Use setup to adjust brightness on the audio control unit screen .
The ESC system is designed to help stabilize the vehicle during certain cornering maneuvers . It is a good idea to keep the ESC turned ON for daily driving whenever possible .
Press the ESC OFF button B to disable Traction Control in ESC (ESC OFF indicator will illuminate) .
To turn both the Traction Control and Stability Control off, press and hold the ESC OFF button B (ESC OFF indicator will illuminate, and an alert sounds) .
REMINDERS:
• ESC is active by default at vehicle star tup . When ignition is cycled, ESC will turn ON again
• The ESC Indicator Light in the instrument cluster will be lit momentarily whenever the ESC is active
For more information on Electronic Stabilit y Control (ESC) and its specific features and operation, please refer to section 4 in your Owner ’s Manual .
For illustrative purposes only . Your actual display, but tons and/or features may var y Refer to section 4 in the Owner ’s Manual for more information .
Refer to section 5 in the Owner ’s Manual for more information .
Hill-Start Assist Control (HAC)†6
HAC helps to prevent the vehicle from rolling backwards when accelerating from a stop while on a steep incline .
The HAC automatically activates whether the ESC is OFF or ON but does NOT activate when the ESC has malfunctioned .
(But tons located on left side of Driver ’s Panel)
AB
Electronic Stability Control (ESC)†6
REMINDERS:
• The HAC does not operate when the gear shift is in the P (Park) or the N (Neutral) position
• HAC does not replace the need to apply brakes while the vehicle is stopped on an incline
• In the event of HAC system malfunctions, see an authorized Kia dealer for ser vice
•When HAC is active (e .g ., during initial acceleration from a stop on an incline), you may notice that the brakes will momentarily remain engaged after you depress the accelerator – this is normal HAC operation
•HAC provides a 2-second delay before the vehicle may star t rolling backwards
QUICK TIPS
15†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS .
DRIVER'S PANEL
DRIVER’SPANEL

16†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDRIO FEATURES & FUNCTIONS GUIDE
DRIVER'S PANEL
DRIVER’SPANEL
Power Windows, Window Lock
& Central Door Lock
A Pull/Press to operate Driver ’s Window Auto Up/Down*
B Press to Unlock/Lock All Doors
C Press the Power Window Lock button* to disable the Rear Passenger Window switches
Refer to section 4 in the Owner ’s Manual for more information .
Automatic Door
Lock/Unlock*
Auto Door Lock/Unlock will engage when the gear shift is moved into or out of the P (Park) position . Refer to the User Settings in the LCD Instrument Cluster modes on how to turn Auto Door Lock/Unlock ON/OFF .
Refer to section 4 in the Owner ’s Manual for more information .
Power/Heated
Outside Mirrors
To adjust outside mirror positions, press the switch D left or right to select mirror, then press the arrows E to adjust .
Mirror heaters are activated when Rear Defroster is turned on .
Refer to section 4 in the Owner ’s Manual for more information .
LR
M I R R O R
'PS
JMMVTUSBUJWF
QVSQPTFT
POMZ
:PVS
BDUVBM
EJTQMBZ

CVU UPOT
BOEPS
GFBUVSFT
NBZ
WBS Z

Engine Start/Stop Button*†7
To start the engine:
1 . Depress the brake pedal
2 .
Press the Engine Start/Stop button while
gear shift is in P (Park) or N (Neutral)
To turn the engine OFF: Press the Engine Start/Stop button .
To use the Engine Start/Stop button, you must have the Smart Key fob inside the vehicle .
Refer to section 5 in the Owner ’s Manual for more information .
To use electrical accessories:
•ACC position
– When in the OFF position and without depressing the brake pedal, press the Engine Star t/Stop but ton once (amber light)
•ON position
– When already in the ACC position (amber light) and without depressing the brake pedal, press the Engine Star t/Stop but ton (red light)
– When in the OFF position and without depressing the brake pedal, press the Engine Star t/Stop but ton t wice (red light)
•Keeping the vehicle in the ACC or ON position for extended periods of time without turning the engine on may discharge the vehicle’s bat ter y .
QUICK TIPS
Press but ton again to stop Auto Up/Down function .
QUICK TIP
Refer to the inside front cover for more information on QR codes .www .youtube .com/KiaFeatureVideos
Engine Start/Stop Button Video
QR CODE
A
B
C
D
E
REMINDERS:
• In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to the ACC position by pressing the Engine Star t/Stop but ton for more than 2 seconds or 3 times successively within 3 seconds
• If Smar t Key fob bat ter y is dead, you can still star t the engine by pressing the Engine Star t/Stop but ton with the Lock-but ton end of the Smar t Key . The Smar t Key must contact the Engine Star t/Stop but ton directly, at a right angle

17*IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS .
STEERING WHEEL CONTROLS
STEERING WHEEL CONTROLS
Headlight position
Parking light position
AUTOAuto Light*/HBA position
OFFOFF position
One-Touch Lane Change Signal
(Type A shown)
(Type A shown)
Headlights & High Beams
To operate:
•Rotate lever to change the Headlight function
•Push lever to turn High Beams ON
•Pull lever to flash Headlights/High Beams
Turn Signals
To operate:
•Turn Signals – Move lever Up/Down for Right/Left Turn Signal
•One-Touch Lane Change Signal is activated by briefly pressing the Turn Signal Lever Up/Down slightly for less than 1 second and then releasing . The lane change signal will blink 3 times .
– To turn the One-Touch Lane Change Signal off/on, go to User Settings Mode in the LCD Instrument Cluster modes .
– To change how many times the Lane Change Signal blinks (3/5/7), go to User Settings Mode in the LCD Instrument Cluster modes .
AUTO Light Position — When the light switch is in the AUTO Light position, the tail lights and headlights will turn ON/OFF automatically depending on the amount of light outside the vehicle .
High Beam Assist (HBA)* – High Beam Assist is designed to automatically adjust the headlight range by switching between high and low beams based on light detected from other vehicles and road conditions .
To enable HBA , toggle the light switch to the AUTO Light position and turn on the high beams by pushing the lever away from you . The High Beam Assist indicator will illuminate .
Refer to section 4 in the Owner ’s Manual for more information .
For illustrative purposes only . Your actual display, but tons and/or features may var y .
REMINDERS:
• High Beam Assist does not operate below cer tain speeds, or in some lighting and driving conditions . Please be aware of your surroundings and exercise proper road etiquet te when operating a vehicle using the high beams
• HBA will operate when vehicle speed exceeds 25 mph
• If the lever is pushed away from you while HBA is operational, HBA will turn off and the high beams will be on continuously . If the lever is pulled toward you while HBA is operational, HBA will turn off
• If the light switch is switched to the headlight position, HBA will turn off and low beams will be on continuously
• When the HBA indicator illuminates on the instrument cluster, the HBA is not working properly . See an authorized Kia dealer for ser vice
Refer to section 4 in the Owner ’s Manual for more information .

36*IF EQUIPPEDRIO FEATURES & FUNCTIONS GUIDE
OTHER KEY FEATURES
OTHER KEY FEATURES
Smart Power Trunk*†1 2
Smart Key:
To open the Smart Power Trunk, press and hold the Trunk button A until the Trunk begins opening .
Outside the Vehicle:
To open the Trunk, press the Trunk Release button B .
Smart Power Trunk*
When the Smart Key fob is on your person and you are near the back of the vehicle, within close proximity, the hazard lights will blink and a chime will sound for about 3 seconds as an alert that the Trunk is about to open . Then the alert system will blink and chime two additional times before opening the Trunk .
The Smart Power Trunk feature is off by default . To enable the Smart Power Trunk, go to User Settings in the LCD Instrument Cluster modes, select Door, then Smart Trunk .
REMINDERS:

The trunk can be opened with no-touch activation after about 15 seconds of all doors being closed and locked
The Smar t Trunk feature will not operate when: -
The doors are recently closed and locked, and the Smar t Key is still detected near the vehicle after 15 seconds or within 60 inches of the door handles
-A door is not locked or closed
-The Smar t Key is in the vehicle
The Smar t Key must be outside of the vehicle for the Smar t Trunk to operate

Press any but ton on the Smar t Key fob during the Detect and Aler t stage to deactivate the Smar t Trunk function .
Ensure obstacles and people are out of the way of the Smar t Trunk
For more information on the Smar t Trunk operation, please refer to section 4 in the Owner's Manual .
For illustrative purposes only . Your actual display, but tons and/or features may var y .
During the Smar t Power Trunk aler t, the Trunk can be deactivated with the Smar t Key by pressing any but ton on the key fob .
QUICK TIPHOLDA
B