window KIA SEDONA 2016 Navigation System Quick Reference Guide

35
Precautions Required
for Successful Voice
Recognition
1. Voice recognition supports only
the commands that are displayed
on the screen and written in the
User’s Guide.
2. To ensure the correct recognition
and execution of your command,
say your command when you hear
the beep after a voice prompt.
3. Voice recognition automatically
ends if:
1) A call is incoming or outgoing
2) A media (USB or iPod, etc.) is
connected or disconnected
3) The front or rear view camera
is operated (optional)
4) The car engine starts or stops
5) A system key, such as
RADIO
or
MEDIA is selected
6) An emergency occurs, for
example re-searching for the
route after the navigation
route has been lost
4. The microphone that recognizes
your voice is located over the
head part in the driver’s seat.
To make your commands bet-
ter understood, keep your body
straight in the driver’s seat when
speaking the command.
5. Speaking naturally and clearly will
ensure better recognition of your
voice commands. 6.
In the following cases voice rec-
ognition will be affected by ambi-
ent noise.
1) The sound of the wind if any
window or the sun roof is
open.
2) A strong wind blowing from
the air vents. Set climate con-
trol to blow softer than level 3.
3) Vibrations from passing
through a tunnel.
4) Vibrations from driving on an
uneven road.
5) Storms and heavy rain.
Voice Recognition
,@:1@(<64@/>"7/@23(JOEE


 <64@/>"7/@23(JOEE


 


ß
1
 

63
Search
Places
You can enter POI Name, Address or
Coordinates that you wish to search by.
Press the NAVI head unit key. Ü

Select the
Destination tab. Ü
Select
the
Search Bar.
Enter the POI Name, Address and
Coordinates of the location you want in
the input window above, and press the
Done button.
If you select a location from the
search result list, it will bring you to
the point.
If you press the All Cities in MI button
on the search result screen, it will
bring you to the City search screen
where you can filter the search
results by city names.
If you press the POI Categories button
from the search result screen, it will
bring you to the POI Categories
screen where you can filter the
search results by POI Categories.
It will bring you from the search
result screen to the screen of the
point where you can set a destina-
tion or a waypoint, or register the
current position to the address book.
,@:1@(<64@/>"7/@23(JOEE


 <64@/>"7/@23(JOEE


 


ß
1