set KIA SELTOS 2021 Navigation System Quick Reference Guide

9-42
Illumination
Link to Cluster Illumination Control: The display brightness
is automatically adjusted based on the cluster illumination.
Daylight
: You can set the display brightness when Daylight is
selected under Mode. Uncheck Link to Cluster Illumination
Control and then set to the desired brightness.
 Night: You can set the display brightness when Night is
selected under Mode. Uncheck Link to Cluster Illumination
Control and then set to the desired brightness.
A
A
To reset all screen brightness settings to the default values,
press Reset.
Illumination
You can set the system to automatically adjust the display
brightness depending on the ambient light intensity. You can also
set the system to keep the display bright or dark all the time. You
can set to automatically adjust the display brightness depending
on the cluster illumination. You can also set the level of display
brightness to use while using the daytime or night mode.
Mode
Automatic: The display brightness is automatically adjusted
based on the surrounding environment.
Daylight: It keeps the display always bright regardless of the
surrounding environment.
Night: It keeps the display always dark regardless of the
surrounding environment.

9-43
Screen Saver
You can select the items to display on the screen saver in standby
mode.
None
Displays nothing on the system screen saver.
Digital Clock
Displays the digital clock on the system screen saver.
Analog Clock
Displays the analog clock on the system screen saver.A
A
Press
to choose the Analog Clock to show on the screen.
Blue Light Filter
Enable blue light filtering to adjust the screen light to reduce the
level of eye strain.
Use Blue Light Filter
Enable or disable blue light filtering.
Blue Light Filter Settings
Set to activate blue light filtering automatically based on the
ambient light or pick the time range manually.
Automatic: Enable blue light filtering based on the ambient
light.
Scheduled Time: Enable blue light filtering during the set
time range.

9-45
Reset
You can initialize all display settings such as brightness.
Media Change Notifications
You can set to briefly display media information at the top of
screen while playing the next item when you move from the
media player screen to another.
Extend Rear Camera Use
You can set to display the rear camera display even when you
change the shift position other than “R” (Reverse) after reversing.A
A
When you shift to "P" (Park) or drive at a predetermined
speed or faster, the rear view display disappears to display the
previous screen.

9-46
Repeat Folder
Set to include sub-folders when playing a folder on repeat.
Configuring the media settings
(if equipped)
Set to receive a notification when the information changes during
playback or to include sub-folders when playing a folder on
repeat.
1 On the All Menus screen, press Setup >
Media.
The media settings screen appears.
2 Configure the settings required:
Media Change Notifications
You can set to briefly display media information at the top of
screen while playing the next item when you move from the
media player screen to another.

10-2
Solutions
Before reporting a malfunctioning system, refer to the following table and see if you can identify and fix the problem. If the problem persists
or you are unable to locate your specific need, contact your place of purchase or dealer.
Sound and display
SymptomPossible cause Solution
A blank screen appears and
sound is not audible. The system is turned off.

Check that the start switch is in “ACC” or “ON.”
Press the Power button on the control panel to turn on the
system.
Sound volume is too low. Turn the Volume knob on the control panel to adjust the volume.
Sound is muted. Press the Mute button on the steering wheel to unmute.
Sound is audible from only one
side of the speakers. Sound is imbalanced.
On the All Menus screen, press Setup >
Sound >
Sound Tuning
and adjust the sound outputs for the left and right speakers.
The sound is cut off or noise is
heard. Vibration occurs in the system.
When the system vibrates, the sound may be cut off or noise may
occur. This is not a system failure. The system is restored as soon as
the vibration stops.

10-3
SymptomPossible cause Solution
The image quality is poor. Screen adjustment is required. On the All Menus screen, press Setup >
Display >
Illumination,
and then adjust the brightness.
> See “ Illumination.”
Vibration occurs in the system. The images may get distorted when vibration occurs in the system.
This is not a system failure. The system is restored as soon as the
vibration stops.
The display is aged or the system
performance is degraded. If the problem persists, contact your place of purchase or dealer.
Small red, blue, and green dots
are shown on the screen. LCD has very high-density pixels. For this reason, there may be dead
pixels (that are always off) or lit pixels (that are always on) within 0.01
percent of the total pixels.

10-5
Bluetooth connection
SymptomPossible cause Solution
The system is not detected by a
Bluetooth device. Registration mode needs to be
run. On the All Menus screen, press Setup
>
Device Connections
> Bluetooth >
Bluetooth Connections >
Add New to run the
registration mode and perform search again from the Bluetooth
device.
> See “ Connecting a Bluetooth device.”
The Bluetooth device is not
connected. The Bluetooth function should
be activated. Activate the Bluetooth function on the Bluetooth device to connect.
Any error occurs while using the
Bluetooth function.
 Turn the Bluetooth function OFF / ON on the Bluetooth device
and then connect the device again.
Turn the Bluetooth device off and on and then connect the device
again.
Remove the battery from the Bluetooth device and attach it back,
turn on the device, and then connect the device again.
Delete the system and Bluetooth device from the registration lists
respectively, and then connect the device again.

10-6
Phone projection
SymptomPossible cause Solution
The phone projection function
is not performed when a
smartphone is connected using
a USB cable. Phone projection is not
supported.
Visit the website to check whether your smartphone supports the
phone projection.

Android Auto: https://support.google.com/androidauto
Apple CarPlay: http://www.apple.com/ios/carplay
The function is inactive.
 On the All Menus screen, press Setup
>
Device Connections,
select the function to use, and then turn on the phone projection
option.
 Make sure that the phone projection is not disabled in the
application settings or block-out settings on your smartphone.
Smartphone is encountered with
poor operation or malfunction.
 Check that the smartphone battery level is not too low.
Recognition may not work properly when the battery level is too
low.
The phone projection may not work properly when the signal
strength is weak.
When the smartphone is locked, first unlock it.
Initialize the smartphone and connect the device again.
A black screen appears when
the phone projection is
activated or in use. The smartphone malfunctions.

Remove the USB cable from the smartphone and connect the
device again.
Initialize the smartphone and connect the device again.

10-7
System operation
SymptomPossible cause Solution
The previous media mode does
not appear when the system is
turned off and on. It is encountered with poor
media connection or playback
error. When the media source is not connected or played normally, the
previous mode appears. Connect the media source again or play it
again.
The system slows down or does
not operate at all. An internal error occurs in the
system.

Restart the system by pressing the reset button with a sharp
object such as pen or clip.
If the problem persists, contact your place of purchase or dealer.
The system is not turned on. Fuse-related issues
Visit an auto service shop and replace the fuse with a new one of
appropriate capacity.
If the problem persists, contact your place of purchase or dealer.

10-11
Bluetooth
QWhich functions can I use via Bluetooth?
AYou can use the hands-free call function with a mobile
phone connected. You can also play music after
connecting an audio device such as MP3 player or mobile
phone.
> See “Making a call via Bluetooth .“, “Listening to music
via Bluetooth.”
QHow can I register a Bluetooth device?
AOn the All Menus screen, press Setup >
Device
Connections >
Bluetooth >
Bluetooth Connections >

Add New. From the Bluetooth device to be connected,
search for the vehicle system and register it. Use the
Bluetooth device to enter or approve the authentication
number displayed on the system. Then the device is
added to the list of Bluetooth devices in the system and
automatically connected to the system.
> See “ Connecting
a Bluetooth device.”
FAQ
Navigation
QHow can I update the map?
AYou can download the latest map data to a USB device
and use the device to update the map.
> See “ Updating the
system software and map.”
QGuidance is made by bypassing the route or the speed
camera alerts are late.
ASelect another route after setting the route options.
On the map screen, press
> Route >
Route
Options to change the settings and resume navigation.
> See “ Changing the route search criteria.”
When the system is not updated, update the software
and map and then perform search again.
> See “Updating
the system software and map.”