key KIA SPORTAGE 2023 Features and Functions Guide
[x] Cancel search | Manufacturer: KIA, Model Year: 2023, Model line: SPORTAGE, Model: KIA SPORTAGE 2023Pages: 66, PDF Size: 5.66 MB
Page 41 of 66
39†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
INFOTAINMENT SYSTEMS
INFOTAINMENT
SYSTEMS
Power Outlets A: Use the power outlets for mobile phones and other devices designed to operate on a 12V (180W max)
power outlet
Multimedia USB Port B: Use Multimedia USB port to connect USB audio devices and smartphones
USB-C Charger Port C: Devices can be recharged using a USB-C cable The Engine Start/Stop button needs to in the
ACC/ON/START position to operate the USB-C Charger Port
Digital Clock
Press the SETUP key on the audio head unit, then select General Press the onscreen Date/Time button
to enter the clock settings Then use the onscreen buttons to navigate through setup and return to exit
Multimedia USB Port, Power Outlets & USB Charger Port
For more information on the Aux/USB Por ts and Power Outlets, refer to section 4 in the Owner's Manual
For more information, refer to the Car Infotainment System Quick Reference Guide
REMINDERS:
•
Using the power outlets and the USB por ts for prolonged periods of time with the Engine Star t/Stop but ton in the ACC position (Engine OFF) could cause the bat ter y to discharge
•
Kia recommends that you only use USB cables made by your device’s manufacturer Third-par t y USB cables may cause damage to your device
•When needed, Daylight Savings must be enabled in the Clock Set tings screen
•To access manual date and time set ting, turn GPS time OFF in the Clock Set tings (Kia Connect with Smar t Navigation*)
QUICK TIPS
•The power outlets are inactive when ignition is in the OFF position
•The Multimedia USB data por t is located next to the Power Outlets The USB Charger Por t does not suppor t data transfer
•The Multimedia USB Por t in the center panel charges slower than the USB Charger Por ts throughout the vehicle
QUICK TIPS
(Center Console)
１2V１80WUSB
ABCRefer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Multimedia USB Port, Power Outlets & USB Charger Port Video
QR CODE
Page 42 of 66
Charge a compatible smartphone wirelessly by placing it on the charging
pad A at the front of the console, near the Multimedia USB ports and the
charging indicator, while the ignition is on
1
Enable Wireless Charging in the User Settings* in the Instrument
Cluster LCD or the Vehicle Settings* in the infotainment system, select
Convenience then Wireless Charging System
2 All doors must be closed
3 Place a compatible smartphone on the center of the charging pad
4 Indicator light B may change to amber once wireless charging begins
5 Once charging is complete, the amber light may change to green
Wireless Smartphone Charging System*
40 *IF EQUIPPEDSPORTAGE FEATURES & FUNCTIONS GUIDE
CENTER PANEL
CENTERPANEL
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Wireless Smartphone Charging Video
QR CODE
REMINDERS:
•
The smar tphone must be a compatible phone with QI function available; Some smar tphone models are not QI cer tified, which may effect the speed or per formance of the wireless charging
•
Avoid placing other metal items in the bin while charging as to not impede the charging area
•
This vehicle is equipped with wireless charging technology which allows for a device to be charged using inductive charging; however, device compatibilit y varies
•
Inductive charging systems are less ef ficient than conventional charging through cable As a result, higher device operating temperatures may be experienced during use
• Charging Performance: Your device’s position on the wireless charging system can affect charging per formance Other factors that may affect the charging rate include foreign objects, such as coins or pens, and phone case thickness
•If driver door is opened, charging will be disabled
•For wireless charging to occur, all doors (excluding rear hatch) must be closed and the Smar t Key Fob must be detected inside the vehicle
•For best results, place smar t-phone on the center of the charging pad
•If wireless charging does not work, move smar tphone around the pad until the charging indicator turns amber
•Avoid placing other metal items in the bin while charging as to not impede the charging area
QUICK TIPS
(Center Console)
１2V１80WUSB
A
B
Page 46 of 66
44*IF EQUIPPEDSPORTAGE FEATURES & FUNCTIONS GUIDE
CENTER PANEL
CENTERPANEL
The Electronic Parking Brake (EPB) system utilizes an electric motor to engage the parking brake
Applying the Parking Brake
Depress the brake pedal and pull up the EPB switch A Ensure that the indicator light is illuminated on the instrument cluster
If parked on a steep incline/decline, pull up the EPB switch for more than 3 seconds for a firmer EPB application
Releasing the Parking Brake
The EPB will automatically release when the brake pedal is engaged and shifter is shifted out of P (Park) to R (Reverse)
or shifted out of N (Neutral) to Reverse or D (Drive) To release EPB manually, depress the brake pedal, then press the EPB switch A, with the ignition switch in the ON position Ensure that the indicator light is OFF
Auto Hold*
Auto Hold temporarily maintains the vehicle at a standstill even though the brake pedal is not depressed after the driver brings the vehicle to a complete stop by depressing the brake pedal Auto Hold can be turned On/Off using the AUTO HOLD button B on the center panel below the gear shift Before Auto Hold will operate, the driver ’s door, engine hood, and liftgate must be closed
The Auto Hold indicator on the Instrument Cluster has four states:
White: Standby - With vehicle at a standstill and AUTO HOLD button B pressed ON, the indicator will illuminate white While driving the vehicle (vehicle is not at a standstill), the Auto Hold indicator will remain white
Green: Engaged - When coming to a complete stop by depressing the brake pedal, the Auto Hold indicator changes from white to green
Off (not illuminated) - The indicator will turn off when the AUTO HOLD button B is manually pressed off
Yellow: Malfunction - When the indicator is illuminated yellow, there may be a system malfunction Take your vehicle to a local Kia dealer
Electronic Parking Brake (EPB)*
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Electric Parking Brake (EPB) / Auto Hold Video
QR CODE
REMINDERS:
•
To reduce the risk of an accident, do not activate Auto Hold while driving downhill, backing up or parking your vehicle
•
Do not solely rely on the Auto Hold system to keep the vehicle stopped Always pay at tention to traf fic and road conditions, and be prepared to depress the brakes
REMINDERS:
•
As a bulb check, the EPB malfunction indicator will illuminate for approximately 3 seconds when the ignition switch is turned ON
•
If the warning light does not illuminate temporarily, or continues to remain lit, take your vehicle to an authorized Kia dealer and have the system checked
•The EPB should not be operated while the vehicle is moving
•
A click or electric brake motor sound may be heard while operating or releasing the EPB, but these conditions are normal and indicate that the EPB is functioning properly
Refer to section 5 in the Owner ’s Manual for more information
•When leaving your keys with parking lot at tendants or valet, make sure to inform them how to operate the EPB
•Pull up and hold EPB switch a second time to increase brake pressure if parked on a decline or incline
•If parked on a steep incline, pull up the EPB switch for more than 3 seconds for a firmer EPB application
QUICK TIPS
Refer to page 4 for location of Instrument Cluster indicators
Refer to section 5 in the Owner ’s Manual for more information
AUTO
HOLDOFF
DRIVE MODE
B
HOLD
HOLD "
(Center Console)(Driver ’s Panel)
Page 51 of 66
HOLDHOLD
49*IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
OTHER KEY FEATURES
OTHER KEY FEATURES
HOLD
- 0 $ , 6 / - 0 $ ,
3 F N P U F C V U U P O D P O7T H V S B U J P O N B Z W B S Z E F Q F O E J O H P O W F I J D M F P Q U J P O T ' P S N P S F J O G P S N B U J P O P O U I F . F D I B O J D B M , F Z
Q M F B T F S F G F S U P T F D U J P O J O U I F 0 X O F S s T . B O V B M
Mechanical Key F:
1 Pull out door handle
2 Remove door handle keyhole cover with Mechanical Key by pressing up into slot as shown H
3 Insert Mechanical Key I and turn left to unlock Driver ’s Door Turn left twice within 4 seconds to unlock all doors
4 Insert Mechanical Key and turn right to lock Driver ’s Door to lock all doors
5 Return keyhole cover to its original position
Use to turn Child-Protector Rear Door Lock
Driver’s Door Lock/Unlock button G:
•Press button once to unlock Driver ’s Door
•Press again within 4 seconds to unlock All Doors
•Press again to lock All Doors
Smart Key with Remote Start*
A Press to lock All Doors
B Press to unlock Driver ’s Door Press twice in 4 seconds to unlock All Doors and Liftgate
C
Power Liftgate*: Press and hold for Power Liftgate to open automatically Press again at any time to stop Press and hold again to automatically close
Manual Liftgate*: Press and hold to unlock the Liftgate and then manually open
D
Press and hold for more than a half-second for Panic Alarm To turn off Alarm, press any button
E Press to release Mechanical Key F
J Remote Start*: Lock the doors by pressing the door lock button A within 32 feet distance from the vehicle Within four (4) seconds of pressing the door lock button A, press and hold the Remote Start button J for more than two (2) seconds to start the vehicle To stop the Remote Start operation, press the button again If driver does enter vehicle within ten minutes of starting the vehicle, the engine will automatically turn off
(Type C shown)
A
J
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Smart Key with Remote Start / Remote Smart Parking Assist (RSPA) Video
QR CODE
B
G
H
I
C
D
E
F
•If the Smar t Key bat ter y is weak or not working properly, hold the Smar t Key fob up to the Engine Star t/Stop but ton (Lock but ton side closest) and press to star t engine
•The Smar t Key ’s signal can be blocked by the normal operation of a cell or smar tphone To help prevent this, store each device separately
•When reinser ting the mechanical key into the fob, make sure it is pushed all the way in until there is a click sound
QUICK TIPS
Page 52 of 66
Refer to section 4 in the Owner ’s Manual for more information
Refer to section 4 in the Owner ’s Manual for more information
50 *IF EQUIPPEDSPORTAGE FEATURES & FUNCTIONS GUIDE
OTHER KEY FEATURES
OTHER KEY FEATURES
A Press the release button to unfold the key
B Press to lock all doors
C Press to unlock driver ’s door Press
twice in 4 seconds to unlock all doors
and Liftgate
D Press and hold to unlock the liftgate and
then manually open
E Press and hold more than 0 5 seconds
(half a second) for Panic Alarm To turn
OFF Alarm, press any button
Remote Keyless Entry (Folding Key)*Double-Turn Lock/Unlock All
•Turn clockwise once to unlock driver ’s door
•Turn clockwise again within 4 seconds to unlock all doors
•Turn counterclockwise once to lock all doors
Lock
Unlock
HOLD
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Kia Smart & Folding Key Fobs Video
QR CODE
A
B
C
D
E
REMINDERS:
•
The Liftgate does not automatically open when the but ton D is pressed
•
Remote but ton configuration may var y depending on vehicle options
•
The Liftgate unlocks when the Smar t Key fob is within close proximit y of the Liftgate
Page 53 of 66
51 *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
OTHER KEY FEATURES
OTHER KEY FEATURES
Fuel Filler Lid ReleaseFuel Cap / Malfunction Indicator
(Check Engine Light)To open the Fuel Filler lid:
1 When all doors are unlocked, press the right center
edge of the Fuel Filler lid A
2 Pull the Fuel Filler lid out to fully open B
To open the Fuel Cap, turn it counterclockwise C
Tighten for ONE CLICK to prevent Malfunction
Indicator from illuminating
HOLD
Lock U
nlo ck
L ock U
nlo ck
3 F G F S U P T F D U J P O J O U I F 0 X O F S s T . B O V B M G P S N P S F J O G P S N B U J P O
3 F G F S U P T F D U J P O J O U I F 0 X O F S s T . B O V B M G P S N P S F J O G P S N B U J P O
3 F G F S U P U I F J O T J E F G S P O U D P W F S G P S N P S F J O G P S N B U J P O P O 2 3 D P E F T X X X Z P V U V C F D P N , J B ' F B U V S F 7 J E F P T
Kia Fuel Cap Video
Fuel Filler Lid Video
QR CODE
Place the Fuel Cap on the inside of the Fuel Filler Lid when fueling D
QUICK TIP
REMINDERS:
•The fuel filler lid will unlock when Driver ’s door is unlocked
•To unlock fuel filler lid:
-Press the unlock but ton on your smar t key
-Press the Central Door unlock but ton on armrest trim of driver ’s door
-Pull the driver ’s inside door handle out ward
-The fuel filler lid will lock when all doors are locked
•To lock fuel filler lid:
-Press the lock but ton on your smar t key
-Press the Central Door lock but ton on armrest trim of driver ’s door
-All doors and fuel filler lid will automatically lock after the vehicle speed exceeds 9 mph
REMINDERS:
•
To open the fuel door, press the right edge of the fuel door
•
It is normal operation when tightening to hear one click, and then when Fuel Cap is released, it clicks backA
BC
D
Page 54 of 66
52†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDSPORTAGE FEATURES & FUNCTIONS GUIDE
OTHER KEY FEATURES
OTHER KEY FEATURES
ABC
HomeLink® with Auto-Dimming Rearview Mirror*†3
The HomeLink® Universal Transceiver is designed to connect to your garage door opener, electric gate, home lighting, etc The Auto-Dimming Rearview Mirror is designed to help reduce glare coming from a vehicle’s headlights in the rear HomeLink® with Auto-Dimming Rearview Mirror can connect to three electronic transmitters
REMINDER: Mirror indicator light will illuminate when automatic dimming is ON
Programming a New HomeLink® Button:
1 Press and release the HomeLink® Channel button A, B or C, you would like to program The HomeLink® User Inter face Indicator G will flash orange slowly (If it doesn’t, go to the steps of “Erasing HomeLink® Buttons” section on next page, and start over)
2 Position the garage-door opener remote 1-3 inches away from the HomeLink® buttons
3 While the HomeLink® User Inter face Indicator G is flashing orange, press and hold the garage-door opener remote button until the HomeLink® User Inter face Indicator G changes from orange to green
4 Wait until your garage door comes to a complete stop, regardless of position, before proceeding to the next step
5 Press and release the HomeLink® Channel button A, B or C that you’re programming If the HomeLink® User Interface Indicator G is solid green, HomeLink® is connected and should operate when the HomeLink® Channel button A, B or C is pressed If your device operates, programming is complete
–If the indicator light rapidly flashes green, firmly press, and hold the HomeLink® Channel button A, B or C slowly, for two seconds up to three times in a row, to complete the programming process Do not press the HomeLink® Channel button rapidly If your device now operates, programming is complete
–If the device does not operate, continue with step 6
6 At the garage door opener motor, (security gate motor, etc ) locate the “Learn”, “Smart ”, “Set ” or “Program” button This can usually be found where the hanging antenna wire is attached to the motor-head unit (see the device’s manual to identify this button) The name and color of the button may vary by
manufacturer A ladder and/or second person may simplify the following steps
7 Firmly press and release the “Learn”, “Smart ”, “Set ” or “Program” button You now have up to 30 seconds to complete the next step
8 Return to the vehicle and firmly press and hold the HomeLink® button slowly, for two seconds, up to three
times in a row Do not press the HomeLink® button rapidly As soon as you see the garage door start to move, stop pressing any buttons until a few seconds after the garage door has come to a complete stop, regardless of position At this point programming is complete and your device should operate when the HomeLink® Channel button is pressed
A HomeLink® button
B HomeLink® button
C HomeLink® button
D Garage Door Opener Status Indicator:
Closing or Closed
E HomeLink Operation Indicator
F Garage Door Opener Status Indicator:
Opening or Opened
G HomeLink User Inter face Indicator
EDF(RearviewMirror)
G
For illustrative purposes only Your actual display, but tons and/or features may var y
Page 55 of 66
53†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
OTHER KEY FEATURES
OTHER KEY FEATURES
HomeLink® with Auto-Dimming Rearview Mirror*†3 (continued)
Erasing a Programmed Button:
1 Press and hold the desired HomeLink® Channel button
A, B or C you want to re-program DO NOT release
the button
2 The HomeLink® User Inter face Indicator G will
illuminate solid green Release the button as soon as
the HomeLink® User Inter face Indicator G begins to
flash orange, usually about 20 seconds
3 Proceed with the steps in the “Programming a New
HomeLink® Button” section
For more information, go to HomeLink com or call (800) 355-3515
See section 4 in the Owner ’s Manual for more information
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Homelink® Support Video
QR CODE
•If your garage door opener has the “myQ”†1 9 logo on its side, it has t wo-way communication capabilit y to display “Closing” or “Opening” status message on Homelink® mirror Refer to section 4 in the Owner ’s Manual on how to set this up or for more information
•When programming, park outside of the garage door
•The Star t/Stop but ton needs to be in the accessor y (ACC) position
•Replace the hand-held garage door transmit ter for quicker and accurate programming
QUICK TIPS
For information on how to erase all programmed but tons at the same time, refer to section 4 of the Owner ’s Manual
QUICK TIP
REMINDERS:
•
Erasing programmed but tons will delete all trained transmit ters
•A ladder may be needed to access the garage door opener
•A second person may be needed to help
•Some of the steps are time sensitive
Operating HomeLink®
Press and release the desired programmed HomeLink®
Channel button A, B or C The HomeLink® User Interface Indicator G should light green, solid or flashing, and your programmed device should operate If your device does not operate, the HomeLink® programming was not successful,
and you’ll need to reprogram the button(s)
Page 56 of 66
54†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDSPORTAGE FEATURES & FUNCTIONS GUIDE
HOLDHOLD
Opening from Outside the Vehicle:
To open Power Liftgate automatically, press the Rear Hatch Release button A on exterior of the Liftgate
Automatically close by pressing the Power Liftgate Close button B
Opening from Inside the Vehicle:
Open: Press and briefly hold the Power Liftgate Open/Close button C to automatically close the Liftgate
Close: Press and hold the button C until liftgate is completely closed If the button C is released while closing, the power liftgate will stop and a warning chime will sound
Smart Key:
To open the Power Liftgate, press and hold the Liftgate button D until the Liftgate begins opening Press and hold to close, and until the liftgate is closed completely If button is released while closing, the liftgate will stop and a chime will sound
REMINDERS:
•
Pulling the Rear Hatch upward by the handle or pressing the but ton a second time will interrupt the automatic opening of the Power Liftgate
•When closing, be mindful of any objects or persons
Power Liftgate Opening Height Adjustment
Set the opening height in Vehicle Settings* Press the SETUP key/button on the infotainment system, select VEHICLE, DOOR, then POWER LIFTGATE OPENING HEIGHT Select the desired option
To manually set the opening height, do the following steps:
1 Position the liftgate manually to the preferred height
2 Press and hold Power Liftgate Close button B more than 3 seconds
3 A system beep will sound twice indicating the height setting has been saved
The liftgate will then open to the set height To change setting again, repeat steps 1-3
REMINDER: Ensure objects and people are out of the way when operating the power liftgate
Power Liftgate*†1 1
(But ton located on Driver's Panel)
OTHER KEY FEATURES
OTHER KEY FEATURES
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Power Liftgate, Key Fob & Opening Height/Speed Adjustment
Smart Key with Remote Start / Remote Smart Parking Assist (RSPA) Video
QR CODE
(Located on Liftgate inside lip near latch)B
A
D
HOLD
HOLDC
Page 57 of 66
55†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
OTHER KEY FEATURES
OTHER KEY FEATURES
When the Smart Key fob is on your person and you are near the back of the vehicle, within close proximity, the hazard lights will blink and a chime will sound for about 3 seconds as an alert that the Smart Power Liftgate is about to open Then the alert system will blink and chime two additional times before opening the Smart Power Liftgate
The Smart Power Liftgate feature is off by default To enable the Smart Power Liftgate, go to Vehicle Settings* in the Infotainment System Press the SETUP key or onscreen button, then VEHICLE Select DOOR, then SMART LIFTGATE
Manual Liftgate* / Liftgate
Release Button
Smart Power Liftgate*†1 1
Located underneath the rear liftgate hatch With liftgate unlocked, press the Liftgate Release Button A and pull the liftgate up by the handle to open
Refer to section 4 in the Owner ’s Manual for more information
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Smart Liftgate Operation, Opening Height/Speed Adjustment Video
Liftgate Buttons and Operation Video
Manual Liftgate & Key Fob Controls Video
QR CODE
A
REMINDERS:
•
All doors are closed and locked after about 15 seconds for the system to operate
•The Smar t Power Liftgate feature will not operate when:
-
The doors are recently closed and locked, and the Smar t Key is still detected after 15 seconds near the vehicle or within 60 inches of the door handles
-A door is not locked or closed
-The Smar t Key is in the vehicle
•
Press any but ton on the Smar t Key fob during the Detect and Aler t stage to deactivate the Smar t Power Liftgate function
•Ensure obstacles and people are out of the way of the liftgate
•During the Smar t Power Liftgate aler t, the Smar t Power Liftgate can be deactivated with the Smar t Key by pressing any but ton on the key fob
•
The open height can be adjusted For information on how to set open height, see your Owner ’s Manual
QUICK TIPS
•
The liftgate must be unlocked before it can be opened by the Liftgate Release But ton
•
The liftgate unlocks automatically and can then be opened, when the Smar t Key fob* is within close proximit y to the vehicle
QUICK TIPS