steering wheel KIA STONIC 2018 User Guide
[x] Cancel search | Manufacturer: KIA, Model Year: 2018, Model line: STONIC, Model: KIA STONIC 2018Pages: 523, PDF Size: 24.99 MB
Page 119 of 523
STEERING WHEEL
Electric power steering
Power steering uses the motor to as‐sist you in steering the vehicle. If the
engine is off or if the power steering
system becomes inoperative, the vehi‐ cle may still be steered, but it will re‐
quire increased steering effort.
The motor driven power steering is
controlled by the power steering con‐ trol unit which senses the steering
wheel torque, steering wheel position
and vehicle speed to command the mo‐ tor.
The steering wheel becomes heavier as
the vehicle’s speed increases and be‐
comes lighter as the vehicle’s speed de‐ creases for better control of the steer‐
ing wheel.
Should you notice any change in the ef‐
fort required to steer during normal ve‐ hicle operation, have the system
checked by a professional workshop.
Kia recommends to visit an authorized Kia dealer/service partner.NOTICE
The following symptoms may occur
during normal vehicle operation:
•The EPS warning light does not il‐
luminate.
•The steering effort is high imme‐
diately after turning the ignition
switch on. This happens as the
system performs the EPS system
diagnostics. When the diagnostics
is completed, the steering wheel
will return to its normal condition.
•A click noise may be heard from
the EPS relay after the ignition
switch is turned to the ON or LOCK
position.
•Motor noise may be heard when
the vehicle is at a stop or at a low
driving speed.
(Continued)
(Continued)
•If the Electric Power Steering Sys‐
tem does not operate normally,
the warning light will illuminate on
the instrument cluster. The steer‐
ing wheel may become difficult to
control or operate abnormally. In
this case, have the system inspec‐
ted by a professional workshop.
Kia recommends to visit an au‐
thorized Kia dealer/service part‐
ner.
•The steering effort increases if
the steering wheel is rotated con‐
tinuously when the vehicle is not
in motion. However, after a few
minutes, it will return to its normal
conditions.
•When you operate the steering
wheel in low temperature, abnor‐
mal noise could occur. If tempera‐
ture rises, the noise will disappear.
This is a normal condition.
(Continued)
4-37
4
Features of your vehicle
Page 120 of 523
(Continued)
•When the charging system warn‐
ing light comes on or the voltage is
low (When the alternator (or bat‐
tery) does not operate normally or
it malfunctions), the steering
wheel may get heavy and become
difficult to control operate abnor‐
mally.
Tilt & telescopic steering (if
equipped)
A tilt and telescopic steering wheel al‐
lows you to adjust the steering wheel before you drive.
You can also raise it to give your legs
more room when you exit and enter
the vehicle.
The steering wheel should be posi‐ tioned so that it is comfortable for you
to drive, while permitting you to see
the instrument panel warning lights and gauges.
WARNING
•Never adjust the angle of thesteering wheel while driving. Youmay lose steering control andcause severe personal injury,death or accidents.
•After adjusting, push the steeringwheel both up and down to be cer‐tain it is locked in position.
To change the steering wheel angle,
pull down the lock release lever (1), ad‐ just the steering wheel to the desired
angle (2) and height (3, if equipped),
then pull up the lock-release lever to lock the steering wheel in place. Be sure
to adjust the steering wheel to the de‐
sired position before driving.
Features of your vehicle
4-38
Page 121 of 523
Heated steering wheel (if
equipped)
When the ignition switch is in the ON
position, pressing the heated steering wheel button warms the steering
wheel. The indicator on the button will
illuminate.
To turn the steering wheel off, press the button once again. The indicator on
the button will turn off.
It will turn off automatically approxi‐
mately 30 minutes after the heated steering wheel is turned on.
If you turn off the ignition within 30
minutes after pressing the steering
wheel heater button, from next ignition ON, the heater will be off.
CAUTION
•Do not install any grip to operatethe steering wheel. This causesdamage to the heated steeringwheel system.
•When cleaning the heated steeringwheel, do not use an organic sol‐vent such as paint thinner, ben‐zene, alcohol and gasoline. Doingso may damage the surface of thesteering wheel.
•If the surface of steering wheel isdamaged by sharp object, damageto the heated steering wheel com‐ponents could occur.
Horn
To sound the horn, press the horn sym‐
bols on your steering wheel. Check the horn regularly to be sure it operates
properly.
NOTICE
To sound the horn, press the area in‐
dicated by the horn symbol on your
steering wheel (see illustration). The
horn will operate only when this
area is pressed.
4-39
4
Features of your vehicle
Page 136 of 523
To change the trip mode, press the
TRIP button. - For Type C, D cluster
LÜ 5 S J Q N F U F S LÜ ' V F M & D P O P N ZLÜ 5 J N F S
" D D V N V M B U F E * O G P
LÜ 5 S J Q N F U F S LÜ ' V F M & D P O P N ZLÜ 5 J N F S
% J H J U B M T Q F F E P N F U F S
% S J W F * O G P
LÜ " W F S B H F ' V F M & D P O P N Z LÜ * O T U B O U ' V F M & D P O P N Z
5 3 * 1
To change the trip mode, scroll the
MOVE scroll switch (/) in the trip
computer mode.
Trip A/B (for Type A, B cluster)
Tripmeter (1)
• The tripmeter is the total driving dis‐ tance since the last tripmeter reset.- Distance range : 0 ~ 1599999 km or 0 ~ 999999 mi
• To reset the tripmeter, press the RE‐ SET button on the steering wheel formore than 1 second when the trip‐
meter is displayed.
Elapsed Time (2)
• The elapsed time is the total driving time since the last elapsed time re‐
set. - Time range (hh:mm) : 00:00 ~ 99:59
• To reset the elapsed time, press the RESET button on the steering wheelfor more than 1 second when the
elapsed time is displayed.
NOTICE
Even if the vehicle is not in motion,
the elapsed time keeps going while
the engine is running.
Average Vehicle Speed (3)
• The average vehicle speed is calcula‐ ted by the total driving distance and
driving time since the last average vehicle speed reset. - Speed range : 0 ~ 250 km/h or mph
• To reset the average vehicle speed, press the RESET button on the steer‐
ing wheel for more than 1 second
when the average vehicle speed is
displayed.
Features of your vehicle
4-54
Page 138 of 523
(Continued)
•The fuel economy and distance to
empty may vary significantly
based on driving conditions, driving
habits, and condition of the vehi‐
cle.
Average Fuel Economy (2)
• The average fuel economy is calcula‐ ted by the total driving distance and
fuel consumption since the last aver‐ age fuel economy reset. - Fuel economy range: 0 ~ 99.9km/L, L/100 km or MPG
• The average fuel economy can be re‐ set both manually and automatically.
Manual reset
To clear the average fuel economy
manually, press the RESET (for Type A, B cluster), OK ( for Type C, D cluster)
(reset) on the steering wheel for more
than 1 second when the average fuel economy is displayed.
Automatic reset (for type C, D cluster)
To make the average fuel economy be
reset automatically whenever refueling,
select the L
Page 144 of 523
Shift to P (for smart key system
and automatic transaxle)
• This warning message illuminates ifyou try to turn off the engine with‐
out the shift lever in P (Park) position.
• At this time, the Engine Start/Stop Button turns to the ACC position (If
you press the Engine Start/Stop But‐
ton once more, it will turn to the ON position).
Low Key Battery (for smart key
system)
• This warning message illuminates if the battery of the smart key is dis‐
charged when the Engine Start/Stop Button changes to the OFF position.
Press START button while turning
wheel (for smart key system)
• This warning message illuminates if
the steering wheel does not unlock
normally when the Engine Start/Stop Button is pressed.
• It means that you should press the Engine Start/Stop Button while turn‐
ing the steering wheel right and left.
Steering wheel unlocked (for smart
key system)
• This warning message illuminates if the steering wheel does not lockwhen the Engine Start/Stop Button
changes to the OFF position.
Check Steering Wheel Lock System
(for smart key system)
• This warning message illuminates if the steering wheel does not lock nor‐
mally when the Engine Start/Stop Button changes to the OFF position.
Press brake pedal to start engine
(for smart key system and
automatic transaxle)
• This warning message illuminates if the Engine Start/Stop Button
changes to the ACC position twice by pressing the button repeatedly with‐
out depressing the brake pedal.
• It means that you should depress the brake pedal to start the engine.
Press clutch pedal to start engine
(for smart key system and manual
transaxle)
• This warning message illuminates if the Engine Start/Stop Button
changes to the ACC position twice by
pressing the button repeatedly with‐ out depressing the clutch pedal.
• It means that you should depress the clutch pedal to start the engine.
Key not in vehicle (for smart key
system)
• This warning message illuminates ifthe smart key is not in the vehicle
when you press the Engine Start/ Stop Button.
• It means that you should always have the smart key with you.
Key not detected (for smart key
system)
• This warning message illuminates if
the smart key is not detected when
you press the Engine Start/Stop But‐ ton.
Features of your vehicle
4-62
Page 168 of 523
Fog lights are used to provide improved
visibility when visibility is poor due to fog, rain or snow, etc. The fog lights
will turn on when the fog light switch
(1) is turned on after the parklight is turned on.
To turn off the fog lights, turn the fog
light switch (1) to the O (Off) position.
CAUTION
When in operation, the fog lightsconsume large amounts of vehicleelectrical power. Only use the foglights when visibility is poor.
Rear fog light (if equipped)
¥ 5 Z Q F "
¥ 5 Z Q F #
To turn the rear fog lights on, turn the
rear fog light switch (1) to the on posi‐ tion when the headlight is turned on. Also, the rear fog lights turn on when
the rear fog light switch is turned on
after the front fog light switch (if equipped) is turned on and the head‐
light switch is in the parklight position.
To turn the rear fog lights off, turn the
rear fog light switch to the on position again.
NOTICE
Rear fog light is only on the driver’s
side (if equipped).
Static bending light (if equipped)
While driving the corner, for your sight
and safety, the static bending light is turned on automatically. The system
will operate automatically as follows. • When turning the headlight on
• When the angle of steering wheel is over 35~40 (it is differed from vehicle
speed)
• When the vehicle speed is over 3 km/h
• When driving forward or backward.
Features of your vehicle
4-86
Page 227 of 523
(Continued)
under the influence of drugs is asdangerous or more dangerous thandriving drunk.You are much more likely to have aserious accident if you drink or takedrugs and drive.If you are drinking or taking drugs,don’t drive. Do not ride with a driverwho has been drinking or takingdrugs. Choose a designated driver orcall a cab.
WARNING
•When you intend to park or stopthe vehicle with the engine on, becareful not to depress the acceler‐ator pedal for a long period oftime. It may overheat the engineor exhaust system and cause fire.
(Continued)
(Continued)
•When you make a sudden stop orturn the steering wheel rapidly,loose objects may drop on thefloor and it could interfere withthe operation of the foot pedals,possibly causing an accident. Keepall things in the vehicle safely stor‐ed.
•If you do not focus on driving, itmay cause an accident. Be carefulwhen operating what may disturbdriving such as audio or heater. Itis the responsibility of the driverto always drive safely.
6-05
6
Driving your vehicle
Page 228 of 523
KEY POSITIONS
Ignition switch position
LOCK
0 : # #
5 Z Q F "
- 0 $ , " $ $
0 /
4 5 " 3 5
¥ 5 Z Q F #
The steering wheel locks to protect
against theft. The ignition key can be removed only in the LOCK position.
ACC (Accessory)
The steering wheel is unlocked and
electrical accessories are operative.
NOTICE
If difficulty is experienced turning
the ignition switch to the ACC posi‐
tion, turn the key while turning the
steering wheel right and left to re‐
lease the tension.
ON
The warning lights can be checked be‐
fore the engine is started. This is the normal running position after the en‐
gine is started.
Do not leave the ignition switch ON if
the engine is not running to prevent battery discharge.
START
Turn the ignition switch to the START
position to start the engine. The engine will crank until you release the key;
then it returns to the ON position. The
brake warning light can be checked in this position.
WARNING
nIgnition switch
•Never turn the ignition switch toLOCK or ACC while the vehicle ismoving. This would result in loss ofdirectional control and brakingfunction, which could cause an ac‐cident.
(Continued)
Driving your vehicle
6-06
Page 229 of 523
(Continued)
•The anti-theft steering columnlock is not a substitute for theparking brake. Before leaving thedriver’s seat, always make surethe shift lever is engaged in 1stgear for the manual transaxle or P(Park) for the automatic transaxle,set the parking brake fully andshut the engine off. Unexpectedand sudden vehicle movementmay occur if these precautions arenot taken.
•Never reach for the ignitionswitch, or any other controlsthrough the steering wheel whilethe vehicle is in motion. The pres‐ence of your hand or arm in thisarea could cause a loss of vehiclecontrol, an accident and seriousbodily injury or death.
•Do not place any movable objectsaround the driver’s seat as theymay move while driving, interferewith the driver and lead to an acci‐dent.
Starting the engine
WARNING
•Always wear appropriate shoeswhen operating your vehicle. Un‐suitable shoes (high heels, skiboots,etc.) may interfere withyour ability to use the brake andaccelerator pedal, and the clutch(if equipped).
•Do not start the vehicle with theaccelerator pedal depressed. Thevehicle can move and lead to anaccident.
•Wait until the engine rpm is nor‐mal. The vehicle may suddenlymove if the brake pedal is releasedwhen the rpm is high.
NOTICE
nKick down mechanism (if
equipped)
If your vehicle is equipped with a kick
down mechanism in the accelerator
(Continued)
(Continued)
pedal, it prevents you from driving
at full throttle unintentionally by
making the driver require increased
effort to depress the accelerator
pedal. However, if you depress the
pedal more than approximately 80%,
the vehicle can be at full throttle and
the accelerator pedal will be easier
to depress. This is not a malfunction
but a normal condition.
Starting the gasoline engine
1. Make sure the parking brake is ap‐plied.
2.
Manual Transaxle - Depress the
clutch pedal fully and shift the
transaxle into Neutral. Keep the
clutch pedal and brake pedal de‐
pressed while turning the ignition
switch to the start position.
Automatic Transaxle - Place the
transaxle shift lever in P (Park). De‐ press the brake pedal fully.
You can also start the engine when
the shift lever is in the N (Neutral)position.
6-07
6
Driving your vehicle