steering wheel KIA STONIC 2018 Owner's Guide
[x] Cancel search | Manufacturer: KIA, Model Year: 2018, Model line: STONIC, Model: KIA STONIC 2018Pages: 523, PDF Size: 24.99 MB
Page 272 of 523

SPEED LIMIT CONTROL SYSTEM (IF EQUIPPED)
You can set the speed limit when you
do not want to drive over a specific
speed.
If you drive over the preset speed limit, the warning system operates (set
speed limit will blink and chime will
sound) until the vehicle speed returns within the speed limit.
NOTICE
While speed limit control is in opera‐
tion, the cruise control system can‐
not be activated.
Speed limit control switch
O: Cancels set speed limit.
: Turns speed limit control sys‐ tem on or off.
RES+ : Resumes or increases speed
limit control speed.
SET- : Sets or decreases speed limit
control speed.
To set speed limit:
1. Press the speed limit button
twice on the steering wheel, to
turn the system on.
The speed limit indicator light will
illuminate.
2. Move the lever down (to SET-).
Driving your vehicle
6-50
Page 276 of 523

tween the vehicle or pe‐
destrian ahead before theinitial warning occurs.
Prerequisite for activation
The FCA gets ready to be activated,
when the FCA is selected on the LCD display, and when the following prereq‐
uisites are satisfied.
- The ESC is activated.
- The driving speed is over 10km/h.
(However, FCA is activated within cer‐ tain driving speed.)
- When recognizing the vehicle or the
pedestrian in front. (However, FCA
does not activate according to condi‐
tions in front and vehicle systems,
but it notices only certain warnings.)
WARNING
•The FCA automatically activatesupon placing the ignition switch tothe ON position. The driver can de‐activate the FCA by canceling thesystem setting on the LCD display.
(Continued)
(Continued)
•The FCA automatically deactivatesupon cancelling the ESC, even withthe FCA system ON, and the driverwill not be able to activate the FCAon the LCD display.
•Set or cancel FCA with controllingswitches on steering wheel afterstopping the vehicle in the safeplace for your safety.
FCA warning message and
system control
The FCA produces warning messages
and warning alarms in accordance with the collision risk levels of followings like
vehicle’s sudden braking in front or lack
of vehicle to vehicle distance or collision to pedestrians. Also, it controls the
brakes in accordance with the collision
risk levels.
Forward warning (1st warning)
The warning message appears on the
LCD display with the warning alarms.
Driving your vehicle
6-54
Page 277 of 523

Collision warning (2nd warning)
• The warning message appears on theLCD display with a warning alarm.
• The vehicle will reduce its speed to a certain limit.- The brake activates gradually for vehicles ahead.
- The brake control activates within an arranged limit to ease the im‐
pact from a collision.
Emergency braking (3rd warning)
• The warning message appears on the LCD display with a warning alarm.
• The vehicle will reduce its speed to a certain limit.
- The brake control activates within an arranged limit to ease the im‐
pact from a collision. Maximum
brake control is activated just be‐
fore the collision.
Brake operation
• In an urgent situation, the braking system enters into the ready status
for prompt reaction against the driv‐ er’s depressing the brake pedal. • The FCA provides additional braking
power for optimum braking perform‐
ance, when the driver depresses the
brake pedal.
• The braking control is automatically deactivated, when the driver sharplydepresses the brake pedal, or when
the driver abruptly operates the
steering wheel.
• The braking control is automatically canceled, when risk factors disappear.
CAUTION
The driver should always pay greatcaution to vehicle operation, eventhough there is no warning messageor warning alarm.
WARNING
The FCA cannot avoid all collisions.The FCA might not completely stopthe vehicle before collision, due toambient, weather and road condi‐tions. The driver has the responsibili‐ty to drive safely and control the ve‐hicle.
6-55
6
Driving your vehicle