(Continued)
Please note the expiry date on thesealant bottle.
Using the Tire Mobility Kit
1. Detach  the  speed  restriction  label(1)  from  the  sealant  bottle  (2),  and
place  it  in  a  highly  visible  place  in‐
side  the  vehicle  such  as  on  the
steering wheel to remind the driver
not to drive too fast.
2. Filling  the  sealant  Strictly  follow the  specified  sequence,  otherwise
the  sealant  may  escape  under  high pressure.
3. Shake the sealant bottle.
4. Connect the filling hose (3) onto the connector of the sealant bottle (A).
5. Ensure  that  the  button  (9)  on  the compressor is not pressed.
6. Unscrew  the  valve  cap  from  the valve  of  the  defective  wheel  and
screw  the  filling  hose  (3)  of  the
sealant bottle onto the valve.
7. Insert  the  sealant  bottle  into  the housing  of  the  compressor  so  that
the bottle is upright (B).
8. Ensure  that  the  compressor  is switched off, position 0.
9. Connect  between  compressor  and the  vehicle  power  outlet  using  the
cable and connectors.
NOTICE
Only use the front passenger side
power outlet.
10. With the ignition switched on or en‐ gine  start/stop  button  position  on:
Switch on the compressor and let it
run for approximately 3 minutes to
fill  the  sealant.  The  inflation  pres‐
sure of the tire after filling is unim‐
portant.
11. Switch off the compressor.
   
7-23
7
What to do in an emergency