brakes KIA TELLURIDE 2020 Features and Functions Guide

INSTRUMENT CLUSTER
11
Forward Collision-Avoidance Assist-Pedestrian (FCA-Ped)†6 /
Forward Collision Warning (FCW)†6
FCA-Ped is designed to help alert the driver and, under
certain conditions, apply emergency braking when rapidly
approaching a vehicle that is slowing down, braking or
stopped or if it detects a pedestrian in front of the vehicle.
Initially, FCA-Ped provides Forward Collision Warning
(FCW ) when it detects a potential collision with a vehicle
or a pedestrian in front, emitting an audible warning and
visual alert on the instrument cluster A. Adjust the alert
settings (Active Assist, Warning Only, Off) in the User
Settings. To turn FCA-Ped/FCW off, go to User Settings
again and turn off.
If the system detects that the collision risk has increased,
Forward Collision-Avoidance Assist-Pedestrian (FCA-Ped)
automatically applies the brakes to reduce your speed,
potentially helping to minimize the effects of a possible
collision. FCA-Ped can be turned ON in the User Settings
menu on the Instrument Cluster display.
FCA-Ped/FCW will become active when the:
§ Engine Start /Stop button is ON
§ Vehicle is traveling faster than 5 mph
§ Electronic Stability Control (ESC) is ON
LED Warning Messages:
REMINDERS:
§ FCA-Ped/FCW will be activated by default when the ignition is cycled ON, even when previous setting was OFF
§ FCA-Ped/FCW will not operate when the vehicle is traveling faster than approximately 45/50 mph, respectively
§ If FCA-Ped is operating and the ESC (Electronic Stability Control) is turned off B, FCA-Ped system is automatically turned off
§ When the FCA-Ped system is off, the FCA-Ped warning indicator is on in the Instrument Cluster
The Forward Collision-Avoidance Assist-Pedestrian (FCA-Ped) / Forward Collision Warning (FCW) systems are not substitutes for safe and proper driving. Always drive safely and use Caution.
FCA-Ped and FCW may not always alert the driver when the vehicle is approaching another vehicle.
Images are for illustrative purposes only and may not reflect actual feature or operation.
Collision Warning
Emergency Braking
A
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLE TE OPERATING INFORMATION AND SAFETY WARNINGS.*IF EQUIPPED
FORWARD COLLISION-AVOIDANCE ASSIST-PEDESTRIAN VIDEO
To view a video on your mobile device, snap this QR Code or visit the listed website. Refer to page 2 for more information.www.youtube.com/KiaFeatureVideos

DRIVER’S PANEL
14
ELECTRONIC STABILITY CONTROL VIDEO
To view a video on your mobile device, snap this QR Code or visit the listed website. Refer to page 2 for more information.www.youtube.com/KiaFeatureVideos
Instrument Cluster Control (Instrument Panel Dimmer)
With the Engine Start /Stop button on or the parking lights/headlights on, press A (+) or (-) to adjust the
brightness of the instrument panel illumination.
Electronic Stability Control (ESC)†8 /
Traction Control System (TCS)†8
Electronic Stability Control (ESC) is designed to help
stabilize the vehicle during certain cornering maneuvers.
Traction Control System ( TCS) can help improve traction.
It is a good idea to keep both ESC and TCS turned on
for daily driving whenever possible.
Press the ESC button B to turn Traction Control System OFF/ON.
To turn both Electronic Stability Control and Traction Control System OFF, press and hold the ESC button for
more than 3 seconds. Press again to turn ON.
REMINDERS:
§ ESC is active by default at vehicle startup. When ignition is cycled, ESC will turn ON again
§ The ESC indicator light in the instrument cluster will be lit momentarily whenever ESC is active
Hill-start Assist Control (HAC)†8
Hill-start Assist Control (HAC) is designed to prevent the vehicle from rolling
backwards when accelerating from a stop while on a steep incline.
HAC automatically activates whether ESC is OFF or ON but does NOT
activate when ESC has malfunctioned.
Quick Tip

When HAC is active (e.g., during initial acceleration from a stop on an incline), you may notice that the brakes will momentarily remain engaged after you depress the accelerator. HAC does not replace the need to apply brakes while stopped on an incline.
(Button located on driver’s panel, left of the steering wheel)
REMINDERS:
§ HAC does not operate when the gear shift is in P (Park) or N (Neutral) position
§ HAC does not replace the need to apply brakes while the vehicle is stopped on an incline
For more information on Electronic Stability Control (ESC) and its specific features and operations, please refer to the Owner’s Manual.
AB
*IF EQUIPPED†LEG AL DISCL AIMERS ON BACK INSIDE COVER