Lancia Delta 2008 Owner handbook (in English)

180IN AN EMERGENCY
SIDELIGHTS/DAYTIME LIGHTS
The direction indicators/daylight lights are LED-based.
Contact a Lancia dealership to have there lights replaced.
DIRECTION INDICATORS
Front indicators
To change the bulb, proceed as follows:
remove the protective cover C-fig. 15;
press down near the bulb holder locking tabs (shown
in fig. 18 by the arrows) and simultaneously pull the
unit;
remove the bulb A and replace it;
refit the protective cover C.Side indicators
To change the bulb, proceed as follows:
work on lens A-fig. 19 to compress catch B, then pull
the unit outwards;
turn the bulb holder C, anticlockwise, extract the press-
fitted bulb D and replace it;
refit the bulb holder C in the lens and turn it clock-
wise;
refit the unit making sure that internal catch B clips
into position.
fig. 18L0E0157mfig. 19L0E0158m

IN AN EMERGENCY181
4
FRONT FOG LIGHTS fig. 20 (where provided)
To replace the bulbs in the front fog lights you must con-
tact a Lancia Dealership.
REAR LIGHT CLUSTERS
Contact a Lancia Dealership to replace the LED lights in
the rear light clusters.
REVERSING LIGHTS fig. 21
To replace the bulbs in the reversing lights you must con-
tact a Lancia Dealership.REAR FOG LIGHTS fig. 22
To replace the bulbs in the rear fog lights you must con-
tact a Lancia Dealership.
fig. 20L0E0159mfig. 22L0E0161m
fig. 21L0E0160m

182IN AN EMERGENCY
THIRD BRAKE LIGHT fig. 23
Contact a Lancia Dealership to replace the LED lights in
the third brake light.
NUMBER PLATE LIGHTS
To change the bulb proceed as follows:
operate in the area shown by the arrows and remove
the lens cover unit A-fig. 24;
fig. 23L0E0162mfig. 25L0E0164m
fig. 24L0E0163m
turn the bulb holder B-fig. 25 anti-clockwise;
remove the bulb C and replace it.

IN AN EMERGENCY183
4
fig. 27L0E0166m
fig. 26L0E0165m
REPLACING AN INTERIOR BULB
For the type of bulb and power rating, see “Bulb types”.FRONT COURTESY LIGHT
To replace the bulbs proceed as follows:
work in the points shown by the arrows and remove
light A-fig. 26;
open the protection lid B-fig. 27;
replace bulbs C releasing them from the side contacts;
make sure that new bulbs are correctly clamped be-
tween contacts;
close flap B-fig. 27 and secure courtesy light A-fig.
26 into its housing, making sure that it clicks into place.

184IN AN EMERGENCY
fig. 28L0E0167mfig. 30L0E0169m
fig. 29L0E0168m
REAR COURTESY LIGHT
Versions without sunroof
To replace the bulbs proceed as follows:
work in the point shown by the arrow and remove light
A-fig. 28;
replace bulb B-fig. 29 releasing it from the side con-
tacts and making sure the new bulb is correctly fas-
tened between the contacts.
Versions with sunroof
To change the bulb, proceed as follows:
work in the point shown by the arrow and remove light
A-fig. 30;replace bulb B-fig. 29 releasing it from the side con-
tacts and making sure the new bulb is correctly fas-
tened between the contacts.

IN AN EMERGENCY185
4
fig. 32L0E0171mfig. 33L0E0172m
LUGGAGE COMPARTMENT LIGHT
To change the bulb, proceed as follows:
open the luggage compartment;
remove the light A-fig. 32 levering in the point shown
by the arrow;
open protection B-fig. 33 and replace the press-fitted
bulb;close protection B onto the lens cover;
refit the light A inserting it into its correct position first-
ly on one side and then on the other until it clicks in-
to place.

186IN AN EMERGENCY
fig. 34L0E0173mfig. 36L0E0175m
fig. 35L0E0174m
GLOVE COMPARTMENT LIGHT
To change the bulb, proceed as follows:
open the glove compartment, and remove the light A-
fig. 34;
replace bulb B releasing it from the side contacts and
making sure the new bulb is correctly fastened between
the contacts.
SUN VISOR COURTESY LIGHT
(where provided)
To change the bulb, proceed as follows:
open the cover A-fig. 35 on the mirror;
levering in the points shown by the arrows, remove
light B;replace bulb C-fig. 36 releasing it from the side con-
tacts and making sure the new bulb is correctly fas-
tened between the contacts.

IN AN EMERGENCY187
4
REPLACING FUSES
GENERAL INFORMATION
Fuses protect the electrical system: they cut in (i.e. they
blow) in the event of a fault or improper action on the sys-
tem. Check the efficiency of the corresponding fuse when
a device does not work: the conducting element A- fig.
37 must not be interrupted. If it is, replace the blown fuse
with a new one with the same amperage (same colour).
B intact fuse.
C fuse with damaged filament.
To replace a fuse, use the pliers D-fig. 37 attached to the
dashboard control unit.
To identify the protection fuse, see the tables in the fol-
lowing pages.
fig. 37L0E0085m
If the fuse blows again contact a Lancia
Dealership.
Never replace a blown fuse with anything
other than a new fuse.
Never change a fuse with another with a
higher amp rating; FIRE RISK.
If a general protection fuse (MEGA-FUSE,
MIDI-FUSE, MAXI-FUSE) blows, do not at-
tempt any repair and contact a Lancia Deal-
ership.
Before changing a fuse, check the ignition key
has been removed and that all the other elec-
tric devices have been turned off/disabled.

188IN AN EMERGENCY
fig. 38L0E0087m
FUSE LOCATION
Dashboard fuse box
To access the fuses you must remove the press-fitted cover A.
The fuse box shown in fig. 38 is located in the lower area next to the pedal unit.

IN AN EMERGENCY189
4
Engine compartment fuse box fig. 39 and 40
A second fuse box is located on the right side of the en-
gine compartment, next to the battery. To access this fuse
box release the side tabs and remove cover L. The ID num-
ber of the electrical component corresponding to each fuse
can be found on the back of this cover.
fig. 40L0E0089mfig. 39L0E0088m
If you need to wash the engine compartment,
take care not to directly hit the engine com-
partment control unit with the water jet.