headrest Lancia Musa 2008 Owner handbook (in English)

39
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Armrest adjustment
(where provided) fig. 35
To use the armrest bring it from
position1to position 2.
Positioning the passenger’s seat
to be used as a table
Bring the armrest (where provided) in
vertical position.
Sit on the driver’s seat or rear seats
and move the lever A-fig. 36follow-
ing the direction of the arrow: tilt the
backrest fig. 37on the cushion and
then release the lever. In this position
the back of the seat can be used as a
table.Seat warming (where provided)
The seat warming function is en-
abled/disabled by pressing the but-
tonsB-fig. 38to warm the driver’s
seat and C-fig. 38to warm the pas-
senger’s seat.
When the function is active, a led on
the button is on.
Positioning the seat
on the driver’s side to be used
as a table
To position the seat on the driver’s
side for using it as a table remove the
headrest (see paragraph “Headrest re-
moval” in section “Headrest”) fol-
lowing the previously described pro-
cedure.
fig. 35L0D0043mfig. 36L0D0044m
fig. 37L0D0045m
fig. 38L0D0046m
038-094 MUSA 3ed GB 12-11-2007 11:34 Pagina 39

41
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
The central box is brought back to
vertical position by moving the lever
D-fig. 44again (one lever on each
side) to re-align it with the side rear
backrests until the safety click is
heard indicating that the locking hook
Ehas been secured.
Using the drawer in the
central box compartment
The central box is supplied with a
drawerB-fig. 45.
To use the drawer Bpress button C
and lift the cushion. Adjusting the central box from
the inside
The central box is brought to hori-
zontal position as follows:
❒move lever D-fig. 44(one lever on
each side);
❒bring the central box all the way
down;
❒release the lever.
When the central box is all the way
down, and the headrest has been re-
moved, it is possible to use the glass
recess A-fig. 43(where provided).
fig. 43L0D0051mfig. 44L0D0050mfig. 45L0D0358m
After releasing the adjust-
ment lever, always check
that the seat is locked on the run-
ners by trying to move it back and
forth. If it is not locked, the seat
may move unexpectedly.
WARNING
For max. protection keep
the backrest in upright po-
sition, fully rest your back on it
and place the seat belt snug on the
hips.
WARNING
038-094 MUSA 3ed GB 12-11-2007 11:35 Pagina 41

42
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
Rest position on driver’s side
It is the same procedure as above.
However, the headrest must be re-
moved from the seat on the driver’s
side (see paragraph “Headrest” in this
section).
IMPORTANT Refer to section “Boot
Enlargement” for information on the
operations to be carried out with seats
for enlarging the tailgate. Rest position on passenger’s side
fig. 47
To place the seat in the rest position
keep the rear door open and:
❒bring the passenger’s seat to the
“table” position (see paragraph
“Positioning the seat to be used as
a table” in this section);
❒move the rear seat forwards until
the end of its stroke fig. 48;
❒move the passenger’s seat in table
configuration backwards until the
end of its stroke;
❒remove the rear window shelf (see
paragraph “Removing the rear
window shelf” in this section);
❒tilt the backrest of the rear seat to
the desired position. Adjustment of central box from
luggage compartment
Pull the rope F-fig. 46and at the
same time push the upper part of the
backrest forwards until the stop clip
is released. Move the backrest until it
is positioned horizontally and release
the rope F. To bring the backrest back
to vertical position, repeat the opera-
tion in reverse sequence until the stop
clip is secured.
fig. 46L0D0255mfig. 47L0D0242mfig. 48L0D0243m
038-094 MUSA 3ed GB 12-11-2007 11:35 Pagina 42

44
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
REAR SIDE AND CENTRAL
HEADRESTS (where provided)
Headrests can be adjusted in height.
Headrests are lifted by moving them
upwards until the lock click is heard.
Headrests are lowered by pressing
buttonC-fig. 53.
Headrests are removed (although it is
not required for normal configura-
tions) by pressing button D-fig. 53.
HEADRESTS
FRONT HEADRESTS
Headrests can be adjusted in height.
For height adjustment: pull the head-
rest upwards or push it downwards by
pressing button A-fig. 51. After this
operation is completed, make sure
that the lock click is heard.
Removing the headrest
Press button B-fig. 52to remove the
headrest.
fig. 51L0D0052mfig. 52L0D0237m
If a side bag is fitted, it is
dangerous to use seat cov-
ers that do not belong to the Lin-
eaccessori Lancia range.
WARNING
fig. 53L0D0053m
Travelling without head-
rests can pose a risk for
the passenger.
WARNING
038-094 MUSA 3ed GB 12-11-2007 11:35 Pagina 44

45
SAFETY
DEVICES
STARTING
AND
DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
MAINTENANCE
AND CARE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
ADJUSTING
THE STEERING
WHEEL
The steering wheel can be adjusted in
both height A-fig. 54and depth B.
Proceed as follows:
❒release the lever by pulling it to-
wards the steering wheel (position
2);
❒readjust the steering wheel as re-
quired;
❒lock the lever by pushing it for-
wards (position 1).
Rear cradle headrests op-
timise visibility and must
always be lifted with a passenger
in the car.
WARNING
fig. 54L0D0382m
The steering wheel posi-
tion must be adjusted only
with the car stationary and the en-
gine turned off.
WARNING
Under no circumstances
should after-market oper-
ations involving steering system or
steering column modifications (e.g.:
installation of anti-theft device) be
carried out, because they could
badly affect performance and
safety, cause the warranty to be-
come void and also result in car
non-compliance with homologation
requirements.
WARNING
Adjust the headrests so
that the head, and not the
neck, rests on them. This is the
only way to make their protective
action efficient.
WARNING
For better efficiency of the
headrest protective action
adjust the backrest so that the
chest is straight and the head is as
close as possible to the headrest.
WARNING
When reinstalling the
headrest, make sure that
the installation direction is correct.
Then, check that the height posi-
tion is locked.
WARNING
038-094 MUSA 3ed GB 12-11-2007 11:35 Pagina 45