lock LAND ROVER DEFENDER 1999 Workshop Manual

86ELECTRICAL
10
REPAIR SWITCH - FASCIA - FROM 02MY
Service repair no - 86.25.18
Remove
1.Remove radio.See this Section.
2.Release switch, disconnect multiplug and
remove switch.
Refit
3.Connect multiplug to switch and fit switch to
panel.
4.Fit radio.See this Section.HARNESS - FRONT DOOR - FROM 02MY
Service repair no - 86.25.20
Remove
1.Remove door lock solenoid.See this Section.
2.Carefully peel back section of plastic sheet for
access to harness.
3.Release clips securing harness to panel.
4.Disconnect multiplug from motor.
5.Release harness sleeve and withdraw harness
from door.
6.Release harness sleeve and withdraw harness
multiplugs from’A’post.
7.Disconnect 2 multiplugs and remove harness.
ProCarManuals.com

ELECTRICAL
11
REPAIR Refit
8.Position harness and connect multiplugs.
9.Feed multiplugs into’A’post and secure harness
sleeve.
10.Connect multiplug to motor.
11.Secure harness clips and sleeve.
12.Secure plastic sheet.
13.Fit door lock solenoid.See this Section.SOLENOID/MOTOR - TAIL DOOR - FROM 02MY
Service repair no - 86.26.02
Remove
1.Remove tail door trim casing.See CHASSIS
AND BODY, Repair.
2.Disconnect multiplug from solenoid.
3.Remove bolt and screw securing solenoid to
door.
4.Release clip securing harness to solenoid
mounting bracket.
5.Remove solenoid assembly from operating rod.
6.Remove 2 screws securing solenoid to mounting
bracket.
ProCarManuals.com

86ELECTRICAL
12
REPAIR Refit
7.Fit solenoid to mounting bracket and secure with
screws.
8.Connect operating rod to solenoid assembly.
9.Fit solenoid to door, fit screw and tighten bolt to
6 Nm (4 lbf.ft).
10.Position harness to solenoid mounting bracket
and secure with clip.
11.Connect multiplug to solenoid.
12.Fit tail door trim casing.See CHASSIS AND
BODY, Repair.SOLENOID/MOTOR - FRONT DOOR - FROM 02MY
Service repair no - 86.26.08
Remove
1.Remove door trim casing.See CHASSIS AND
BODY, Repair.
2.Carefully peel back plastic sheet to expose
mechanism.
3.Release clip, detach and remove lock solenoid
link.
4.Loosen 2 screws securing solenoid, release
solenoid from mounting panel, disconnect
multiplug and remove solenoid.
Refit
5.Connect multiplug to solenoid, locate solenoid to
mounting panel and tighten screws.
6.Fit and secure link.
7.Secure plastic sheet.
8.Fit door trim casing.See CHASSIS AND
BODY, Repair.
9.Adjust door lock solenoid.See Adjustment.
ProCarManuals.com

ELECTRICAL
13
REPAIR SOLENOID/MOTOR - REAR DOOR - FROM 02MY
Service repair no - 86.26.09
Remove
1.Remove plastic sheet.See CHASSIS AND
BODY, Repair.
2.Release clip, detach and remove lock solenoid
link.
3.Release clip and disconnect interior handle link
from latch mechanism.
4.Remove 3 bolts securing mounting panel.
5.Loosen remaining bolts and nut, ease mounting
panel away from door and retain in this position
for access.
6.Disconnect multiplug from solenoid.
7.Remove 2 screws securing solenoid.
8.Remove centre pin from bellcrank pivot and
release pivot from mounting panel.
9.Release bellcrank from sill button link and
remove from lock solenoid link.
10.Remove door lock solenoid.
11.Remove link from solenoid.
ProCarManuals.com

88 - INSTRUMENTS
CONTENTS
Page
DESCRIPTION AND OPERATION
FASCIA CONSOLE 2..............................................................................................
REPAIR
INSTRUMENT PACK 1...........................................................................................
CLOCK2 .................................................................................................................
ProCarManuals.com

88INSTRUMENTS
2
REPAIR CLOCK
Service repair no - 88.15.07
Remove
1.Remove instrument pack.See this Section.
2.Disconnect multiplug from clock.
3.Remove threaded clamping ring securing clock
and remove clock.
Refit
4.Position clock and secure to instrument pack.
5.Connect multiplug to clock.
6.Fit instrument pack.See this Section.
ProCarManuals.com