ECU LAND ROVER FREELANDER 2001 Workshop Manual
[x] Cancel search | Manufacturer: LAND ROVER, Model Year: 2001, Model line: FREELANDER, Model: LAND ROVER FREELANDER 2001Pages: 1007, PDF Size: 23.47 MB
Page 963 of 1007
WINDOWS
86-5-6 REPAIRS
Switch - backlight heater
$% 86.65.36
Remove
1.Remove radio.
+ IN CAR ENTERTAINMENT,
REPAIRS, Radio - up to 04MY.
2.Remove selector knobs from heater controls.
3.Remove 2 screws securing heater control
finisher to heater controls and remove finisher.
4.Release heated rear screen switch from heater
controls.
5.Disconnect multiplug from heated rear screen
switch and remove switch.Refit
1.Position heated rear screen switch and connect
multiplug.
2.Fit switch to heater control panel.
3.Fit heater control finisher to heater controls and
secure with screws.
4.Fit heater control knobs.
5.Fit radio.
+ IN CAR ENTERTAINMENT,
REPAIRS, Radio - up to 04MY.
Page 964 of 1007
IN CAR ENTERTAINMENT
REPAIRS 86-6-1
IN CAR ENTERTA INMENT REPAIRS
Radio - up to 04MY
$% 86.50.03
Remove
1. Mid and high line only: Using tool SMD 4091
release radio from centre console.
2.Disconnect multiplugs and aerial from radio
and remove radio.3. Low line only: Using 2.5mm Allen key, loosen
bolts securing radio and release radio from
centre console.
Refit
1.Position radio to facia aperture and connect
multiplugs and aerial.
2.Fit radio to centre console.
3. Low line only: Tighten Allen bolts.
4.Enter security code and check radio cassette
player for correct operation.
M86 6006
SMD 4091
1
23
4
5
6FM
i
M
MODE
M86 6007
Page 965 of 1007
IN CAR ENTERTAINMENT
86-6-2 REPAIRS
Radio/CD - from 04MY
$% 86.50.03
Remove
1.Remove centre console.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console assembly - front - from
04MY.
2.Remove 4 screws securing the Radio/CD
module to fascia.
3.Release Radio/CD module from fascia,
disconnect multiplug and antenna.
4.Remove the Radio/CD module.Refit
1.Position Radio/CD module to fascia, connect
multiplug and antenna.
2.Align rear of Radio/CD module to guide rail and
fit to fascia.
3.Secure Radio/CD module with screws.
4.Fit centre console.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console assembly - front - from
04MY.M86 6115
M86 6171
M86 6116
Page 966 of 1007
IN CAR ENTERTAINMENT
REPAIRS 86-6-3
Speaker - rear - 3 door
$% 86.50.12
Remove
1.Remove body rear side casing.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim casing - body side - rear - 3
door.
2.Remove 4 screws securing speaker to body.
3.Disconnect multiplug from speaker and remove
speaker.
Refit
1.Position speaker to door and connect multiplug.
2.Fit speaker to body and secure with screws.
3.Fit body rear side casing.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim casing - body side - rear - 3
door.
Speaker - rear - 5 door
$% 86.50.12
Remove
1.Remove rear door trim casing.
+ DOORS, REPAIRS, Trim casing -
rear door - up to 04MY.
2.Remove 4 screws securing speaker to door.
3.Disconnect multiplug from speaker and remove
speaker.
Refit
1.Position speaker to door and connect multiplug.
2.Fit screws securing speaker to door.
3.Fit rear door trim casing.
+ DOORS, REPAIRS, Trim casing -
rear door - up to 04MY.
Page 967 of 1007
IN CAR ENTERTAINMENT
86-6-4 REPAIRS
Speaker - front
$% 86.50.15
Remove
1.Remove front door trim casing.
+ DOORS, REPAIRS, Trim casing -
front door - 3 door.
+ DOORS, REPAIRS, Trim casing -
front door - 5 door - up to 04MY.
2.Remove 4 screws securing speaker to front
door.
3.Disconnect multiplug from speaker and remove
speaker.
Refit
1.Position speaker to door and connect multiplug.
2.Fit speaker to door and secure with screws.
3.Fit front door trim casing.
+ DOORS, REPAIRS, Trim casing -
front door - 3 door.
+ DOORS, REPAIRS, Trim casing -
front door - 5 door - up to 04MY.
Aerial - manual - 3 door
$% 86.50.18
Remove
1.Remove headlining.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Headlining - 3 door.
2.Remove 2 screws and release volumetric
sensor mounting bracket.
3.Remove nut securing coaxial cable to aerial
base.
4.Remove aerial base from roof panel and
remove rubber seal.
Refit
1.Position rubber seal and fit aerial base to roof
panel.
2.Connect coaxial cable and secure with nut.
3.Position volumetric sensor bracket and secure
with screws.
4.Fit headlining.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Headlining - 3 door.
Page 968 of 1007
IN CAR ENTERTAINMENT
REPAIRS 86-6-5
Aerial - manual - 5 door
$% 86.50.18
Remove
1.Remove lens from front interior lamp.
2.Remove 2 bolts securing front interior lamp to
body.
3.Release interior lamp from headlining,
disconnect multiplug and remove lamp.
4.Remove nut securing coaxial cable to aerial
base.5.Remove aerial base from roof panel and
remove rubber seal.
Refit
1.Position rubber seal and fit aerial base to roof
panel.
2.Connect coaxial cable and secure with nut.
3.Position front interior lamp and connect
multiplug.
4.Fit front interior lamp to headlining and secure
with bolts.
5.Fit lens to rear interior lamp.
Page 969 of 1007
IN CAR ENTERTAINMENT
86-6-6 REPAIRS
Coaxial lead - front aerial - 3 door
$% 86.50.24
Remove
1.Remove aerial.
+ IN CAR ENTERTAINMENT,
REPAIRS, Aerial - manual - 3 door.
NOTE: Original coaxial lead cannot be
removed as it is part of the body harness.
2.Disconnect coaxial lead from link lead behind
fuse box.Refit
1.Position new coaxial lead to roof panel.
2.Align coaxial lead behind fascia and connect to
link lead.
3.Secure coaxial lead to harness with cable ties.
4.Fit aerial.
+ IN CAR ENTERTAINMENT,
REPAIRS, Aerial - manual - 3 door.
Page 970 of 1007
IN CAR ENTERTAINMENT
REPAIRS 86-6-7
Coaxial lead - front aerial - 5 door
$% 86.50.24
Remove
1.Remove aerial.
+ IN CAR ENTERTAINMENT,
REPAIRS, Aerial - manual - 5 door.
2.Remove 'A' post upper trim finisher.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim finisher - 'A' post - upper -
renew.
3.Remove sun visor.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Sun visor.
NOTE: Original coaxial lead cannot be
removed as it is part of the body harness.
4.Remove stud securing front edge of headlining.
5.Remove grab handle blanking plugs.6.Disconnect coaxial lead from link lead behind
fuse box.
Refit
1.Position new coaxial lead to roof panel.
2.Align coaxial lead behind fascia and connect to
link lead.
3.Secure coaxial lead to harness with cable ties.
4.Fit stud and grab handle blanking plugs to
headlining.
5.Fit 'A' post upper trim finisher.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim finisher - 'A' post - upper -
renew.
6.Fit sun visor.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Sun visor.
7.Fit aerial.
+ IN CAR ENTERTAINMENT,
REPAIRS, Aerial - manual - 5 door.
Page 972 of 1007
IN CAR ENTERTAINMENT
REPAIRS 86-6-9
Speaker - tweeter - rear - 3 door
$% 86.50.35
The procedure to remove the tweeter on 5 door
models is the same as shown for a 3 door, except
that the rear door trim casing has to be removed and
not the body side rear trim casing.
Remove
1.Remove body side rear trim casing.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim casing - body side - rear - 3
door.
2.Remove ring securing tweeter and remove
tweeterRefit
1.Fit tweeter, ensuring lug on tweeter is aligned
with cut-out in trim casing, fit and tighten
securing ring.
2.Fit body side rear trim casing.
+ INTERIOR TRIM COMPONENTS,
REPAIRS, Trim casing - body side - rear - 3
door.
Page 973 of 1007
IN CAR ENTERTAINMENT
86-6-10 REPAIRS
Amplifier - power
$% 86.50.36
Remove
1.Slide LH front seat fully rearwards.
2.Remove 2 bolts securing power amplifier cradle
to bracket.
3.Withdraw power amplifier and cradle assembly,
disconnect multiplug from power amplifier and
remove assembly.4.Remove 3 bolts securing power amplifier to
cradle and remove power amplifier.
Refit
1.Locate power amplifier to cradle and fit and
tighten bolts.
2.Connect multiplug and locate power amplifier
and cradle assembly to bracket.
3.Fit and tighten bolts securing cradle to bracket.
4.Position seat to mid position.