Lexus CT200h 2011 Owner's Manual (in English)
CT200h 2011
Lexus
Lexus
https://www.carmanualsonline.info/img/36/12746/w960_12746-0.png
Lexus CT200h 2011 Owner's Manual (in English)
Trending: four wheel drive, fuse, service indicator, deactivate passenger airbag, wheel torque, parking sensors, auxiliary battery
Page 541 of 696
541
4-3. Do-it-yourself maintenance
4
Maintenance and care
CT200h_EE (OM76041E)Front turn signal lights (LED headlights)
Left side
Remove the power control unit
cover.
Turn the bulb base counter-
clockwise.
Remove the light bulb.
STEP1
STEP2
STEP3
Page 542 of 696
542
4-3. Do-it-yourself maintenance
CT200h_EE (OM76041E)Right side
Move the washer fluid filler opening. (P. 537)
Turn the bulb base counter-
clockwise.
Remove the light bulb.
STEP1
STEP2
STEP3
Page 543 of 696
543
4-3. Do-it-yourself maintenance
4
Maintenance and care
CT200h_EE (OM76041E)Rear turn signal lights
Open the back door and remove
the covers and bolts, and
remove the lamp assembly by
pulling it directly backward
from the rear of the vehicle.
Use a flathead screwdriver
wrapped in a cloth.
Turn the bulb base counter-
clockwise.
Remove the light bulb.
STEP1
STEP2
STEP3
Page 544 of 696
544
4-3. Do-it-yourself maintenance
CT200h_EE (OM76041E)Back-up light/rear fog light
Open the back door and remove
the cover.
Use a flathead screwdriver
wrapped in a cloth.
Turn the bulb base counter-
clockwise.
Remove the light bulb.
The illustrations show the removal of a back-up light from a right-
hand drive vehicle.
STEP1
STEP2
STEP3
Page 545 of 696
545
4-3. Do-it-yourself maintenance
4
Maintenance and care
CT200h_EE (OM76041E)License plate lights
Open the back door and remove
the cover.
Use a flathead screwdriver
wrapped in a cloth.
Turn the bulb base counter-
clockwise.
Remove the light bulb.
STEP1
STEP2
STEP3
Page 546 of 696
546
4-3. Do-it-yourself maintenance
CT200h_EE (OM76041E)Lights other than the above
If any of the lights listed below has burnt out, have it replaced by
any authorized Lexus dealer or repairer, or another duly quali-
fied and equipped professional.
Headlight low beams (LED type)
Front position lights and daytime running lights
Side turn signal lights
Stop/tail lights
High mounted stoplight
Outer foot light
After replacing the bulbs
After lifting up the air cleaner duct or
removing the power control unit cover,
return the duct or the cover to their origi-
nal positions with the clips.
Push up center portion
Insert
Press
Page 547 of 696

547
4-3. Do-it-yourself maintenance
4
Maintenance and care
CT200h_EE (OM76041E)
LED lights
The headlight low beams (LED type), front position lights, daytime running
lights, side turn signal lights, stop/tail lights and high mounted stoplight
consist of a number of LEDs. If any of the LEDs burn out, take your vehicle
to any authorized Lexus dealer or repairer, or another duly qualified and
equipped professional to have the light replaced.
Condensation build-up on the inside of the lens
Contact any authorized Lexus dealer or repairer, or another duly qualified
and equipped professional for more information in the following situations.
Temporary condensation build-up on the inside of the headlight lens does
not indicate a malfunction.
Large drops of water have built up on the inside of the lens.
Water has built up inside the headlight.
When replacing light bulbs
P. 5 3 2
CAUTION
Replacing light bulbs
Turn off the lights. Do not attempt to replace the bulb immediately after
turning off the lights.
The bulbs become very hot and may cause burns.
Do not touch the glass portion of the light bulb with bare hands. Hold the
bulb by the plastic or metal portion.
If the bulb is scratched or dropped, it may blow out or crack.
Fully install light bulbs and any parts used to secure them. Failure to do so
may result in heat damage, fire, or water entering the headlight unit. This
may damage the headlights or cause condensation to build up on the lens.
To prevent damage or fire
Make sure bulbs are fully seated and locked.
Page 548 of 696
548
4-3. Do-it-yourself maintenance
CT200h_EE (OM76041E)
Page 549 of 696

5When trouble arises
549
CT200h_EE (OM76041E)
5-1. Essential information
Emergency flashers .......... 550
If your vehicle needs to be
towed.............................. 551
If you think something is
wrong ............................. 5575-2. Steps to take in an
emergency
If a warning light turns on
or a warning buzzer
sounds ............................ 558
If a warning message is
displayed ........................ 565
If you have a flat tire
(vehicles with a spare
tire) ................................ 586
If you have a flat tire
(vehicles without a spare
tire) ................................ 600
If the hybrid system will not
start ................................ 614
If you lose your keys ....... 616
If the electronic key does
not operate properly....... 617
If the 12-volt battery is
discharged ...................... 620
If your vehicle overheats . 627
If the vehicle becomes
stuck............................... 632
If your vehicle has to be
stopped in an
emergency...................... 634
Page 550 of 696
550
CT200h_EE (OM76041E)
5-1. Essential information
Emergency flashers
NOTICE
To prevent 12-volt battery discharge
Do not leave the emergency flashers on longer than necessary when the
hybrid system is not operating.
Use the emergency flashers if the vehicle malfunctions or is involved
in an accident.
Press the switch to flash all
the turn signal lights. To turn
them off, press the switch
once again.
Trending: display, fuel pressure, steering wheel, fuel fill door release, maintenance, transmission, dimensions