key Lexus CT200h 2015 (in English) Service Manual

CT200h_OM_OM76174U_(U)
2975-7. Setup menu
5
Audio system
Select “Set Passkey” using a voice command or the “TUNE•SEL” knob.
XPa t t e r n A
Press the talk switch, say a 4 to 8-digit number, and select “Confirm” using a
voice command or the knob.
The number should be input 1 digit at a time.
XPa t t e r n B
Select a 4 to 8-digit number using the knob.
The number should be input 1 digit at a time.
When the entire number to be registered as a passkey has been input, press
the knob again.
If the number to be registered has 8 digits, pressing of the knob is not necessary.
Select “Delete Audio Player (Delete Audio)” using a voice command or the
“TUNE•SEL” knob.
XPa t t e r n A
Select the portable player to be deleted by either of the following methods
and select “Confirm” using a voice command or the knob:
a. Press the talk switch and say the name of the desired portable player.
b. Press the talk switch and say “List Audio Players”. When the name of thedesired portable player is read aloud, press the talk switch.
XPa t t e r n B
Select the desired portable player to be deleted using the knob.
If the portable player to be deleted is paired as a Bluetooth
® phone, the registra-
tion of the cellular phone can be deleted at the same time. A voice guidance
instruction to delete a cellular phone is heard.
Select “Yes” or “No” using a voice command or the knob.
(Bluetooth
® phone → P. 3 1 7 )
■The number of portable players that can be registered
Up to 2 portable players can be registered in the system.
Changing the passkey
Deleting a registered portable player
1
2
2
3
1
2
2
3

299
CT200h_OM_OM76174U_(U)5-7. Setup menu
5
Audio system
Setting a cellular phone
To enter the menu for each function, follow the steps below using a voice com-
mand or the “TUNE•SEL” knob:
●Registering a cellular phone
1. “Setup”
→ 2. “Phone Setup” → 3. “Pair Phone”
●Selecting a cellular phone to be used
1. “Setup” → 2. “Phone Setup” → 3. “Connect Phone (Connect)”
●Changing the registered name of a cellular phone
1. “Setup” → 2. “Phone Setup” → 3. “Change Name”
●Listing the registered cellular phones
1. “Setup” → 2. “Phone Setup” → 3. “List Phones”
●Changing the passkey
1. “Setup” → 2. “Phone Setup” → 3. “Set Passkey”
●Deleting a registered cellular phone
1. “Setup” → 2. “Phone Setup” → 3. “Delete Phone”
Select “Pair Phone” using a voice command or the “TUNE•SEL” knob, and per-
form the procedure for registering a cellular phone. ( →P. 2 9 3 )
Registering a cellular phone in the hands-free phone system allows the system
to function. The following functions can be used for registered cellular
phones:
Functions and operation procedures
Registering a cellular phone

CT200h_OM_OM76174U_(U)
3015-7. Setup menu
5
Audio system
Select “Set Passkey” using a voice command or the “TUNE•SEL” knob.
XPa t t e r n A
Press the talk switch, say a 4 to 8-digit number, and select “Confirm” using a
voice command or the knob.
XPa t t e r n B
Select a 4 to 8-digit number using the knob.
The number should be input 1 digit at a time.
When the entire number to be registered as a passkey has been input, press
the knob again.
If the number to be registered has 8 digits, pressing of the knob is not necessary.
Select “Delete Phone” using a voice command or the “TUNE•SEL” knob.
XPa t t e r n A
Select the cellular phone to be deleted by either of the following methods and
select “Confirm” using a voice command or the knob:
a. Press the talk switch and say the name of the desired cellular phone.
b. Press the talk switch and say “List Phones”. When the name of the desiredcellular phone is read aloud, press the talk switch.
XPa t t e r n B
Select the desired cellular phone to be deleted using the knob.
If the cellular phone to be deleted is paired as a Bluetooth
® audio player, the
registration of the audio player can be deleted at the same time. A voice guid-
ance instruction to delete a Bluetooth
® audio player is heard.
Select “Yes” or “No” using a voice command or the knob.
(Bluetooth
® audio player →P. 3 1 7 )
■The number of cellular phones that can be registered
Up to 6 cellular phones can be registered in the system.
Changing the passkey
Deleting a registered cellular phone
1
2
2
3
1
2
2
3

3045-7. Setup menu
CT200h_OM_OM76174U_(U)
■Initialization
●The following data in the system can be initialized:
• Phone book
• Outgoing and incoming call history
•Speed dials
• Registered cellular phone data
•Security code
• Registered Bluetooth
® enabled portable player data
• Passkey for the cellular phones
• Passkey for the Bluetooth
® audio players
•Guidance volume
• Receiver volume
• Ring tone volume
●Once the initialization has been completed, th e data cannot be restored to its original
state.
■When the phone book is locked
The following functions cannot be used:
●Dialing by inputting a name
●Speed dialing
●Dialing a number stored in the call history memory
●Using the phone book

CT200h_OM_OM76174U_(U)
4136-1. Using the air conditioning system and defogger
6
Interior features
■Windshield wiper de-icer (if equipped)
This feature is used to prevent ice from building up on the windshield and
wiper blades.
Select on the option control screen.
When the windshield wiper de-icer is on, is displayed on the air condition-
ing control screen.
The windshield wiper de-icer will automati cally turn off after a period of time.
■Location of air outlets
The air outlets and air volume
changes according to the selected
air flow mode.
■Adjusting the position of and opening and closing the air outlets
Direct air flow to the left or right,
up or down.
Turn the knob to open or close
the vent.
■Registering air conditioning settings to electronic keys
●Unlocking the vehicle using an electronic key and turning the power switch to ON
mode will recall that key’s registered air conditioning settings.
●When the power switch is turned off, the cu rrent air conditioning settings will automati-
cally be registered to the electronic key that was used to unlock the vehicle.
The system may not operate correctly if more th an one electronic key is in the vicinity or
if the smart access system is used to unlock a passenger door.
Settings for the electronic key and the corresponding door can be changed.
Contact your Lexus dealer.
Air outlets
1
2

4206-1. Using the air conditioning system and defogger
CT200h_OM_OM76174U_(U)
■Registering air conditioning settings to electronic keys
●Unlocking the vehicle using an electronic key and turning the power switch to ON
mode will recall that key’s registered air conditioning settings.
●When the power switch is turned off, the cu rrent air conditioning settings will automati-
cally be registered to the electronic key that was used to unlock the vehicle.
The system may not operate correctly if more th an one electronic key is in the vicinity or
if the smart access system is used to unlock a passenger door.
Settings for the electronic key and the corresponding door can be changed.
Contact your Lexus dealer.
■Using automatic mode
Fan speed is adjusted automatically according to the temperature setting and the ambi-
ent conditions.
Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately
after the “AUTO” button is pressed.
■When the outside temperature exceeds 75 °F (24 °C) and the air conditioning system
is on
●In order to reduce the air conditioning power consumption, the air conditioning system
may switch to recirculated air mode automatically.
This may also reduce fuel consumption.
●Recirculated air mode is selected as a default mode when the power switch is turned to
ON mode.
●It is possible to switch to outside air mode at any time by pressing .
■Fogging up of the windows
●The windows will easily fog up when the humidity in the vehicle is high. Pressing “A/C”
button on will dehumidify the air from the outlets and defog the windshield effectively.
●If you turn “A/C” off, the windows may fog up more easily.
●The windows may fog up if the recirculated air mode is used.
■Outside/recirculated air mode
●When driving on dusty roads such as tunnels or in heavy traffic, set to
the recirculated air mode. This is effective in preventing outside air from entering the
vehicle interior. During cooling operation, setting the recirculated air mode will also
cool the vehicle interior effectively.
●Outside/recirculated air mode may automatically switch depending on the tempera-
ture setting or the inside temperature.

426
CT200h_OM_OM76174U_(U)6-2. Using the interior lights
Turns the lights on/off
Turns the light on
Turns the door position on
*
*
: When the personal/interior light main switch is in the off position, the rear inte-
rior light will not turn on even if the door
is opened with the rear interior light
switch in door position.
●Illuminated entry system: The lights automati cally turn on/off according to power switch
mode, the presence of the electronic key, whether the doors are locked/unlocked, and
whether the doors are opened/closed.
●If the interior lights remain on when the power switch is turned off, the lights will go off
automatically after 20 minutes.
●Settings (e.g. the time elapsed before the lights turn off) can be changed.
(Customizable features: →P. 5 9 1 )
Front personal/interior lights
Rear interior light
1
2
NOTICE
To prevent 12-volt battery discharge, do not leave the lights on longer than necessary
when the hybrid system is off.

428
CT200h_OM_OM76174U_(U)6-3. Using the storage features
Open (press the button)
Lock with the mechanical key
Unlock with the mechanical key
Lift the lid while pushing the knob to
release the lock.
■Cup holders
Glove box
1
2
3
Console box
The tray slides forward/backward and can be
removed.
Cup holders/bottle ho lders/door pockets

459
CT200h_OM_OM76174U_(U)
7Maintenance and care
7-1. Maintenance and careCleaning and protecting the vehicle exterior.................460
Cleaning and protecting the vehicle interior .................. 463
7-2. Maintenance Maintenance requirements............................. 465
General maintenance .............. 467
Emission inspection and maintenance (I/M)
programs .................................... 470
7-3. Do-it-yourself maintenance Do-it-yourself service precautions.................................. 471
Hood ................................................473
Positioning a floor jack ............. 475
Engine compartment ................ 476
12-volt battery.............................. 484
Tires................................................. 488
Tire inflation pressure ............... 495
Wheels ...........................................498
Air conditioning filter .............. 500
Electronic key battery ..............502
Checking and replacing fuses..............................................504
Light bulbs..................................... 507

460
CT200h_OM_OM76174U_(U)7-1. Maintenance and care
Cleaning and protecting the vehicle exterior
●Working from top to bottom, liberally
apply water to the vehicle body, wheel
wells and underside of the vehicl e to remove any dirt and dust.
●Wash the vehicle body using a sponge or soft cloth, such as a chamois.
●For hard-to-remove marks, use car wash soap and rinse thoroughly with
water.
●Wipe away any water.
●Wax the vehicle when the waterproof coating deteriorates.
If water does not bead on a clean surface, apply wax when the vehicle body is cool.
■Self-restoring coat
The vehicle body has a self-restoring coating that is resistant to small surface scratches
caused in a car wash etc.
●The coating lasts for 5 to 8 years from when the vehicle is delivered from the plant.
●The restoration time differs depending on the depth of the scratch and outside temper-
ature. The restoration time may become shor ter when the coating is warmed by apply-
ing warm water.
●Deep scratches caused by keys, coins, etc. cannot be restored.
●Do not use wax that contain abrasives.
■Automatic car washes
●Fold the mirrors before washing the vehicle. Start washing from the front of the vehicle.
Make sure to extend the mirrors before driving.
●Brushes used in automatic car washes may scratch the vehicle surface and harm your
vehicle’s paint.
●Rear spoiler may not be washable in some automatic car washes. There may also be an
increased risk of damage to vehicle.
■High pressure car washes
●Do not allow the nozzles of the car wash to come within close proximity of the windows.
●Before using the car wash, check that the fuel filler door on your vehicle is closed prop-
erly.
■Note for a smart access system with push-button start
If the door handle becomes wet while the electr onic key is within the effective range, the
door may lock and unlock repeatedly. Place the key in a position 6 ft. (2 m) or more sep-
arate from the vehicle while the vehicle is being washed. (Take care to ensure that the key
is not stolen.)
Perform the following to protect the vehicle and maintain it in prime condi-
tion: