overheating Lexus ES300 1992 Starting And Driving

STARTING AND DRIVING
104
(b) Using engine braking
Selector lever
Overdrive switch
: Shifting
“D” (Drive) range
“2” (Second) range
“L” (Low) range
To use the braking power of the engine, downshift the
transmission in the way described below:

Turn off the overdrive switch. (This is effective only when
you are driving in the “D” range.) The “O/D OFF” indicator
light in the instrument cluster will come on and the
transmission will downshift to the third gear.

Shift into the “2” range. The transmission will downshift to
the second gear when the vehicle speed is 117 km/h (73
mph) or lower and more powerful engine braking will be
obtained.

Shift into the “L” range. The transmission will downshift to
the first gear when the vehicle speed is 55 km/h (34 mph)
or lower and maximum engine braking will be applied.CAUTION:
Be careful when downshifting on a slippery surface. The
abrupt change in engine speed could cause the vehicle to
spin or skid.
(c) Using the “2” and “L” ranges
The “2” and “L” ranges are used for strong engine braking as
described previously.
With the selector lever in “2” or “L”, you can start the vehicle in
motion as with the lever in “D”.
With the selector lever in “2”, the vehicle will start in the first
gear and automatically shift to the second gear.
With the selector lever in “L”, the transmission is engaged in
the first gear.
NOTICE:

Be careful not to overrev the engine. Watch the
tachometer to keep engine rpm from going into the
red zone. The approximate maximum allowable
speed for each range is given below for your
reference:
“2” ... 117 km/h (73 mph)
“L” ... 55 km/h (34 mph)

Do not continue hill climbing or hard towing for a long
time in the “2” or “L” range. This may cause severe
automatic transmission damage from overheating. To
prevent such damage, “D” range should be used in
hill climbing or hard towing.