recommended oil Lexus ES300 1994 Engine

5W-30 Preferred
10W-30
Temperature range anticipated before next oil change
171 Oil capacity
Drain and refill
with filter
without filter
Oil grade:
Recommended oil viscosity (SAE):
4.7 L (5.0 qt., 4.1 Imp.qt.)
4.5 L (4.8 qt.. 4.0 Imp.qt.)
API SG or SH, Energy-Conserving II multigrade engine
oil or ILSAC molt oracle engine oil.

ENGINE
5W-30 Preferred
10W-30
Temperature range anticipated before next oil change
177 Remove the oil filler cap and add engine oil a little at a time,
checking the dipstick. The appropriate quantity of oil needed
to fill between the low line and the full line on the dipstick is
indicated below for reference.
When the level reaches within the correct range, return the
filler cap and turn the cap clockwise until you hear a click.
Oil quantity. L (qt., Imp. qt.) 1.5 (1.6, 1.3)
NOTICE:
Avoid overfilling, or the engine could be damaged.
Check the oil level on the dipstick once again after
adding the oil.
Engine oil selection
Use API SG or SH, Energy-Conserving II multigrade engine oil
or ILSAC multigrade engine oil. Recommended viscosity is as
follows with SAE 5W- 30 being the preferred engine oil for your
vehicle.
If you use SAE 10W-30 engine oil in extremely low
temperatures, the engine may become difficult to start, so
SAE 5W-30 engine oil is recommended.