Coolant Lexus GS350 2017 User Guide
[x] Cancel search | Manufacturer: LEXUS, Model Year: 2017, Model line: GS350, Model: Lexus GS350 2017Pages: 676, PDF Size: 67.73 MB
Page 464 of 676

4646-3. Do-it-yourself maintenance
GS350_200t_GS F_OM_OM30F83E_(EE)
The coolant level is satisfactory if it is between the “FULL”/ “F” and “LOW”/ “L” 
lines on the reservoir when the engine is cold.
■Engine coolant reservoir
Reservoir cap 
“FULL” line 
“LOW” line
If the level is on or below the “LOW” li ne, add coolant up to the “FULL” line. 
(  P. 602)
Coolant
1
2
3
GS350GS200t
GS F     
Page 465 of 676

465
 6-3. Do-it-yourself maintenance
6
Maintenance and care
GS350_200t_GS F_OM_OM30F83E_(EE)
■Intercooler coolant reservoir (GS200t only)
Reservoir cap 
“F” line 
“L” line 
If the level is on  or below the “L” line,
add coolant up to the “F” line.  (  P. 602)
■Coolant selection 
Only use “Toyota Super Long Life Coolant”  or a similar high quality ethylene glycol
based non-silicate, non-amine, non-nitrite,  and non-borate coolant with long-life hybrid
organic acid technology.
“Toyota Super Long Life Coolant” is a mixt ure of 50% coolant and 50% deionized water.
(Minimum temperature: -35 C [-31 F])
For more details about coolant, contact an y authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer.
■If the coolant level drops within a short time of replenishing 
Visually check the radiator, hoses, engine  coolant reservoir caps, drain cock and water
pump.  
If you cannot find a leak, have any authorized  Lexus retailer or Lexus authorized repairer,
or any reliable repairer, test the cap an d check for leaks in the cooling system.
1
2
3
WARNING
■When the engine is hot 
Do not remove the engine coolant reservoi r cap, the intercooler coolant reservoir cap
or the coolant inlet cap. ( P. 606)
The cooling system may be under pressure and may spray hot coolant if the cap is 
removed, causing serious injuries, such as burns.
NOTICE
■When adding coolant 
Coolant is neither plain water nor straight  antifreeze. The correct mixture of water and
antifreeze must be used to provide proper  lubrication, corrosion protection and cool-
ing. Be sure to read the antifreeze or coolant label.
■If you spill coolant 
Be sure to wash it off with water to  prevent it from damaging parts or paint.   
Page 516 of 676

5167-2. Steps to take in an emergency
GS350_200t_GS F_OM_OM30F83E_(EE)
If you think something is wrong
●Fluid leaks under the vehicle. 
(Water dripping from the air conditioning after use is normal.)
● Flat-looking tires or uneven tire wear
● Engine coolant temperature gauge needle continually points higher than nor- 
mal.
● Changes in exhaust sound
● Excessive tire squeal when cornering
● Strange noises related to the suspension system
● Pinging or other noises related to the engine
● Engine missing, stumbling or running roughly
● Appreciable loss of power
● Vehicle pulls heavily to one side when braking
● Vehicle pulls heavily to one side when driving on a level road
● Loss of brake effectiveness, spongy feeling, pedal almost touches the floor
If you notice any of the following sy mptoms, your vehicle probably needs
adjustment or repair. Contact any authorized Lexus retailer or Lexus autho- 
rized repairer, or any reliable repairer as soon as possible.
Visible symptoms
Audible symptoms
Operational symptoms  
Page 602 of 676

6027-2. Steps to take in an emergency
GS350_200t_GS F_OM_OM30F83E_(EE)
If your vehicle overheats
●The needle of the engine coolant temperature gauge ( P. 108, 113) enters
the red zone or a loss of engine power is experienced. (For example, the vehi- 
cle speed does not increase.)
● “Engine Coolant Temp High Stop in a Safe Place See Owner’s Manual” is shown 
on the multi-information display.
● Steam is coming from under the hood. 
Stop the vehicle in a safe place and turn off the air conditioning system, and 
then stop the engine. 
If you see steam:  
Carefully lift the hood after the steam subsides. 
If you do not see steam: 
Carefully lift the hood. 
After the engine has cooled down sufficiently, inspect the hoses and radiator 
core (radiator) for any leaks.
Radiator 
Cooling fans
If a large amount of coolant leaks, imme- 
diately contact any authorized Lexus 
retailer or Lexus authorized repairer, or 
any reliable repairer.
The following may indicate that your vehicle is overheating.
Correction procedures
1
2
3
1
2   
Page 603 of 676

603
7-2. Steps to take in an emergency
7
When trouble arises
GS350_200t_GS F_OM_OM30F83E_(EE)
The coolant level is satisfactory if it is between the “FULL”/ “F” and “LOW”/ “L” 
lines on the reservoir.
Engine coolant reservoir 
“FULL”/ “F” 
“LOW”/ “L” 
Coolant inlet cap 
Intercooler coolant reservoir
GS200t
4
1
2
3
4
5
GS350GS F     
Page 604 of 676

6047-2. Steps to take in an emergency
GS350_200t_GS F_OM_OM30F83E_(EE)
Add coolant if necessary. 
Water can be used in an emergency if coolant is unavailable.5
GS350GS F
GS200t     
Page 605 of 676

605
7-2. Steps to take in an emergency
7
When trouble arises
GS350_200t_GS F_OM_OM30F83E_(EE)
Start the engine and turn the air conditio ning system on to check that the radi-
ator cooling fans operate and to check for coolant leaks from the radiator or 
hoses. 
The fans operate when the air conditioning  system is turned on immediately after a
cold start. Confirm that the fans are operating by checking the fan sound and air flow. 
If it is difficult to check these, turn the  air conditioning system on and off repeatedly.
(The fans may not operate in freezing temperatures.) 
If the fans are not operating: 
Stop the engine immediately and contact any authorized Lexus retailer or 
Lexus authorized repairer, or any reliable repairer. 
If the fans are operating: 
Have the vehicle inspected at the nearest any authorized Lexus retailer or 
Lexus authorized repairer, or any reliable repairer.
■When adding engine coolant (GS350/GS200t)  
Add coolant in accordance with the following procedure.
Remove caps A and B.
Add engine coolant through the inlet of cap A up to the “[AR/GR] B” line, and then 
install cap A. 
Add engine coolant through the inlet of cap  B until it is full, and then install cap B.
GS200t only: When installing cap B, apply c oolant to the O-ring on the end of cap B.
Cap A 
Cap B
“[AR/GR] B” line (Target fill line)
6
7
1
2
3
GS350 GS200t
1
2
3   
Page 606 of 676

6067-2. Steps to take in an emergency
GS350_200t_GS F_OM_OM30F83E_(EE)
WARNING
■When inspecting under the hood of your vehicle 
Observe the following precautions.  
Failure to do so may result in serious injury such as burns.
●If steam is seen coming from under the h ood, do not open the hood until the steam
has subsided. The engine compartment may be very hot.
●Keep hands and clothing (especially a tie, a scarf or a muffler) away from the fans and 
belts. Failure to do so may cause the hands or  clothing to be caught, resulting in seri-
ous injury.
●GS350: Do not loosen the coolant inlet cap 
or the engine coolant reservoir cap while the
engine and radiator are hot. 
High temperature steam or coolant could 
spray out.
●GS F: Do not loosen the engine coolant res- 
ervoir cap while the engine and radiator are 
hot.  
High temperature steam or coolant could
spray out.
●GS200t: Do not loosen the coolant inlet cap, 
the engine coolant reservoir cap or the inter- 
cooler coolant reservoir cap while the engine 
and radiator are hot. 
High temperature steam or coolant could 
spray out.     
Page 607 of 676

607
7-2. Steps to take in an emergency
7
When trouble arises
GS350_200t_GS F_OM_OM30F83E_(EE)
NOTICE
■When adding engine coolant 
Add coolant slowly after the engine has cool ed down sufficiently. Adding cool coolant
to a hot engine too quickly can cause damage to the engine.
■To prevent damage to the cooling system 
Observe the following precautions:
●Avoid contaminating the coolant with foreign matter (such as sand or dust etc.).
●Do not use any coolant additive.  
Page 625 of 676

625
8
8-1. Specifications
Vehicle specifications
GS350_200t_GS F_OM_OM30F83E_(EE)
Cooling system
Capacity
GS3509.4 L (9.9 qt., 8.3 Imp.qt.)
GS200t
Engine coolant
9.0 L (9.5 qt., 7.9 Imp.qt.)
Intercooler
2.6 L (2.7 qt., 2.3 Imp.qt.)
GS F11.3 L (11.9 qt., 9.9 Imp.qt.)
Coolant typeUse either of the following: