Lexus GX460 2012 Owner's Manual
GX460 2012
Lexus
Lexus
https://www.carmanualsonline.info/img/36/15461/w960_15461-0.png
Lexus GX460 2012 Owner's Manual
Trending: interior lights, warning lights, oil capacity, flat tire, spark plugs, coolant, oil dipstick
Page 191 of 839
189
2-1. Driving procedures
2
When driving
GX460_U.S.A. (OM60J00U)
Changing shift ranges in S modeWhen the shift lever is in the S position, the shift lever can be operated as
follows: For upshifting
For downshifting
The initial shift range in S mode is set automatically to 5 or 4 according to
vehicle speed. However, the initial shift range may be set to 3 or 2 if AI-
SHIFT has operated while the shift lever was in the D position.
(→ P. 1 9 0 )
■ Shift ranges and their functions
● You can choose from 6 levels of engine braking force.
● A lower shift range will provide greater engine braking force than a
higher shift range, and the engine speed will also increase.
Page 192 of 839

190
2-1. Driving procedures
GX460_U.S.A. (OM60J00U)
■S mode
When the shift range is 5 or lower, holding the shift lever toward “+” sets the shift
range to 6.
■AI-SHIFT
AI-SHIFT automatically selects the optimal gear according to driver performance
and driving conditions.
AI-SHIFT automatically operates when the shift lever is in the D position. (Shifting
the shift lever to the S position cancels the function.)
The engine speed remain high after releasing the accelerator pedal. This does not
indicate a malfunction.
■When driving with the cruise control or dynamic radar cruise control
Engine braking will not occur in S mode, even when downshifting to 5 or 4.
( → P. 246, 250)
■If the shift lever cannot be shifted from P
→ P. 7 3 7
■If the “S” indicator does not come on even after shifting the shift lever to S
This may indicate a malfunction in the automatic transmission system. Have the
vehicle inspected by Lexus dealer immediately.
(In this situation, the transmission will operate in the same manner as when the shift
lever is in D.)
■Downshift restriction warning buzzer (S mode)
To help ensure safety and driving performance, downshifting operation may some-
times be restricted. In some circumstances, downshifting may not be possible even
when the shift lever is operated. (A buzzer will sound twice.)
Page 193 of 839
191
2-1. Driving procedures
2
When driving
GX460_U.S.A. (OM60J00U)
CAUTION
■When driving on slippery road surfaces
Do not accelerate or shift gears suddenly. Sudden changes in engine braking may
cause the vehicle to spin or skid, resulting in an accident.
Page 194 of 839
192
2-1. Driving procedures
GX460_U.S.A. (OM60J00U)
Turn signal lever
■Turn signals can be operated when
The “ENGINE START STOP” switch is in IGNITION ON mode.
■If the indicators flash faster than usual
Check that a light bulb in the front or rear turn signal lights has not burned out.
The turn signal lever can be used to show the following intentions of the
driver:Right turn
Left turn
Lane change to the right
(push and hold the lever part-
way)
The right hand signals will flash
until you release the lever.
Lane change to the left (push
and hold the lever partway)
The left hand signals will flash
until you release the lever.
Page 195 of 839
193
2-1. Driving procedures
2
When driving
GX460_U.S.A. (OM60J00U)
Parking brake
■Usage in winter time
See “Winter driving tips” for parking brake usage in winter time. (→P. 366)
NOTICE
■Before driving
Fully release the parking brake.
Driving the vehicle with the parking brake set will lead to brake components over-
heating, which may affect braking performance and increase brake wear.
To set the parking brake, fully
depress the parking brake pedal
with your left foot while
depressing the brake pedal with
your right foot.
(Depressing the pedal again
releases the parking brake.)
U.S.A. Canada
Page 196 of 839
194
2-1. Driving procedures
GX460_U.S.A. (OM60J00U)
Horn
To sound the horn, press on or
close to the mark.
Page 197 of 839
195
2
When driving
GX460_U.S.A. (OM60J00U)
2-2. Instrument cluster
Gauges and meters
Tachometer
Displays the engine speed in revolutions per minute.
Engine coolant temperature gauge
Displays the engine coolant temperature.
Multi-information display
→P. 2 0 4
Fuel gauge
Displays the quantity of fuel remaining in the tank.
Speedometer
Displays the vehicle speed.
Rear height control air suspension display (if equipped)
→P. 3 1 6
Shift position and shift range display
→P. 1 8 6
Page 198 of 839
196
2-2. Instrument cluster
GX460_U.S.A. (OM60J00U)
Changing the displaySwitches between odometer and
trip meter displays. When the trip
meter is displayed, pressing and
holding the button will reset the
trip meter.
Instrument cluster light control switch
The brightness of the instrument cluster lights can be adjusted.
Brighter
Darker
Odometer and trip meter display
Odometer: Displays the total distance the vehicle has been driven.
Trip meter: Displays the distance the vehicle has been driven since the meter was last reset. Trip meters A and B can be used to
record and display different distances independently.
Page 199 of 839

197
2-2. Instrument cluster
2
When driving
GX460_U.S.A. (OM60J00U)
■The meters and display illuminate when
The “ENGINE START STOP” switch is in IGNITION ON mode.
■Instrument cluster brightness adjustment
The instrument cluster brightness levels when the tail lights are on and off can be
adjusted.
■The brightness of the instrument cluster lights
When the tail lights are on, the brightness will change. However, when the sur-
roundings are bright (daytime, etc.) turning on the tail lights will not change the
instrument cluster brightness.
In addition, the brightness of the instrument cluster lights is automatically adjusted
based on the light sensor detecting how bright the surroundings are.
■When disconnecting and reconnecting battery terminals
The trip meter data will be reset.
If the trip meter was displayed last, the ODO screen will be displayed after reset-
ting.
■Customization
Setting of sensitivity of the ambient light sensor used for dimming the meter lights
can be changed. (Customizable features →P. 7 8 2 )
NOTICE
■To prevent damage to the engine and its components
●Do not let the indicator needle of the tachometer enter the red zone, which indi-
cates the maximum engine speed.
●The engine may be overheating if the engine coolant temperature gauge is in the
red zone (H). In this case, immediately stop the vehicle in a safe place, and check
the engine after it has cooled completely. ( →P. 74 4 )
Page 200 of 839
198
2-2. Instrument cluster
GX460_U.S.A. (OM60J00U)
Indicators and warning lights
The indicators and warning lights on the instrument cluster and center
panel inform the driver of the status of the vehicle’s various systems.
Instrument cluster
Center panel (vehicles without a navigation system)
Trending: fog lights, brakes, wheel, power steering fluid, window, wiring, oil filter