Lexus GX460 2021 Owner's Manual / LEXUS 2021 GX460 MULTIMEDIA OWNER'S MANUAL (OM60T29U)

161
2. SETUP
6
PHONE
GX460_MM_OM60T29U_(U)20.03.27 13:49
Registering contacts in the favorites list in
a different way (from the “Contacts”
screen)
1Display the phone top screen.
(  P.136)
2Select the “Contacts” tab.
3Select (gray) at the beginning of the
desired contact list name to be regis-
tered in the favorites list.
 When selected, (gray) is changed to
 (blue), and the contact is registered in
the favorites list.
 Registering contacts in the favorites list in
a different way (from the “Contact De-
tails” screen)
1Display the phone top screen.
(  P.136)
2Select the “Contacts” tab or the “Call
History” tab and select the desired con-
tact.
3Select “Add Favorite” .
4Check that a confirma tion screen is dis-
played when the operation is complete.
■ DELETING THE CONTACTS IN
THE FAVORITES LIST
1Select “Remove Favorite”.
2Select the desired contacts and select
“Remove”.
3Select “Yes” when the confirmation
screen appears.
4Check that a confirmation screen is dis-
played when the operation is complete.
 Deleting contacts in the favorites list in a
different way (from the “Contacts”
screen)
1Display the phone top screen.
( P.136)
2Select the “Contacts” tab.
3Select (blue) at the beginning of the
contact list name to be deleted from the
favorites list.
 When selected, (blue) is changed to
(gray), and the data is deleted from the
list.

162
2. SETUP
GX460_MM_OM60T29U_(U)20.03.27 13:49
Deleting contacts in the favorites list in a
different way (from the “Contact Details”
screen)
1Display the phone top screen.
( P.136)
2Select the “Contacts”, “Call history”
tab or the “Favorites” tab and select the
desired contact to delete.
3Select “Remove Favorite”.
4Select “Yes” when the confirmation
screen appears.
5Check that a confirmation screen is dis-
played when the operation is complete.
1Display the “Phone/Message Settings”
screen. ( P.152)
2Select “Messaging Settings” .
3Select the desired item to be set.
“Messaging Settings” SCREEN

163
2. SETUP
6
PHONE
GX460_MM_OM60T29U_(U)20.03.27 13:49
1Display the phone top screen.
( P.136)
2Select .
3Select “Settings”.
No.Function
Select to set automatic message
transfer on/off.
Select to set automatic message read-
out on/off.
Select to set the SMS/MMS notifica-
tion popup on/off.
Select to set the e-mail notification
popup on/off.
Select to set adding the vehicle signa-
ture to outgoing messages on/off.
Select to set updating message read
status on phone on/off.
Select to change the incoming SMS/
MMS display.
“Full Screen”: When an SMS/MMS
message is received, the incoming
SMS/MMS display screen is dis-
played and it can be operated by se-
lecting the switches on the screen.
“Drop-down”: When an SMS/MMS
message is received, a message is dis-
played on the upper side of the screen.
Select to change the incoming e-mail
display.
“Full Screen”: When an e-mail is re-
ceived, the incoming e-mail display
screen is the displayed and it can be
operated by selecting the switches on
the screen.
“Drop-down”: When an e-mail is re-
ceived, a message is displayed on the
upper side of the screen.
Select to set display of messaging ac-
count names on the inbox tab on/off.
When set to on, messaging account
names used on the cellular phone will
be displayed.
Select to reset all setup items.
INFORMATION
●Depending on the phone, these functions
may not be available.
DISPLAYING THE “Messaging
Settings” SCREEN IN A
DIFFERENT WAY
No.Function

164
2. SETUP
GX460_MM_OM60T29U_(U)20.03.27 13:49
1Display the “Phone/Message Settings”
screen. (P.152)
2Select “Phone Display Settings” .
3Select the desired item to be set.
“Phone Display Settings”
SCREEN
No.Function
Select to change the incoming call
display.
“Full Screen”: When a call is re-
ceived, the hands-free screen is dis-
played and it can be operated by
selecting the switches on the screen.
“Drop-down” : A message is dis-
played on the upper side of the
screen.
Select to set display of the contact/
history transfer co mpletion message
on/off.
Select to reset all setup items.
INFORMATION
●Depending on the phone, these functions
may not be available.

165
GX460_MM_OM60T29U_(U)20.03.27 13:49
6
PHONE
3. WHAT TO DO IF...
1. TROUBLESHOOTING
When using the hands-free system with a Bluetooth® device
If there is a problem with the hands-free system or a Bluetooth® device, first check the
table below.
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
The hands-free sys-
tem or Bluetooth®
device does not
work.
The connected de-
vice may not be a
compatible
Bluetooth
® cellular
phone.
For a list of specific
devices which opera-
tion has been con-
firmed on this system,
check with your
Lexus dealer or the
following website:
http://www.
lexus.com/
MobileLink

The Bluetooth® ver-
sion of the connected
cellular phone may
be older than the
specified version.Use a cellular phone
with Bluetooth® ver-
sion 2.0 or higher
(recommended: Ver.
3.0+EDR or higher).34

166
3. WHAT TO DO IF...
GX460_MM_OM60T29U_(U)20.03.27 13:49
When registering/connecting a cellular phone
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
A cellular phone can-
not be registered.
An incorrect pass-
code was entered on
the cellular phone.Enter the correct
passcode on the cel-
lular phone.
The registration op-
eration has not been
completed on the
cellular phone side.Complete the regis-
tration operation on
the cellular phone
(approve registration
on the phone).

Old registration in-
formation remains on
either this system or
the cellular phone.
Delete the existing
registration informa-
tion from both this
system and the cellu-
lar phone, then regis-
ter the cellular phone
you wish to connect
to this system.
38

167
3. WHAT TO DO IF...
6
PHONE
GX460_MM_OM60T29U_(U)20.03.27 13:49
A Bluetooth® con-
nection cannot be
made.
Another Bluetooth®
device is already
connected.
Manually connect
the cellular phone
you wish to use to this
system.
39
Bluetooth® function
is not enabled on the
cellular phone.Enable the
Bluetooth® function
on the cellular phone.
Automatic
Bluetooth® connec-
tion on this system is
set to off.
Set automatic
Bluetooth® connec-
tion on this system to
on when the engine
switch is in ACCES-
SORY or IGNI-
TION ON mode.
43
“Unable to dial.
Please check your
phone.” message is
displayed.
Bluetooth® function
is not enabled on the
cellular phone.Enable the
Bluetooth® function
on the cellular phone.
Old registration in-
formation remains on
either this system or
the cellular phone.
Delete the existing
registration informa-
tion from both this
system and the cellu-
lar phone, then regis-
ter the cellular phone
you wish to connect
to this system.
38
SymptomLikely causeSolution
Page
Cellular phoneThis
system

168
3. WHAT TO DO IF...
GX460_MM_OM60T29U_(U)20.03.27 13:49
When making/receiving a call
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
A call cannot be
made/received.Your vehicle is in a
“No Service” area.Move to where “No
Service” no longer
appears on the dis-
play.


169
3. WHAT TO DO IF...
6
PHONE
GX460_MM_OM60T29U_(U)20.03.27 13:49
When using the phonebook
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
Phonebook data
cannot be trans-
ferred manually/au-
tomatically.
The profile version of
the connected cellu-
lar phone may not be
compatible with
transferring phone-
book data.
For a list of specific
devices which opera-
tion has been con-
firmed on this system,
check with your
Lexus dealer or the
following website:
http://www.
lexus.com/
MobileLink

Automatic contact
transfer function on
this system is set to
off.Set automatic con-
tact transfer function
on this system to on.
154
Passcode has not
been entered on the
cellular phone.Enter the passcode
on the cellular phone
if requested (default
passcode: 1234).

Transfer operation
on the cellular phone
has not completed.Complete transfer
operation on the cel-
lular phone (approve
transfer operation on
the phone).

Phonebook data
cannot be edited.Automatic contact
transfer function on
this system is set to
on.Set automatic con-
tact transfer function
on this system to off.
154

170
3. WHAT TO DO IF...
GX460_MM_OM60T29U_(U)20.03.27 13:49
When using the Bluetooth® message function
SymptomLikely causeSolution
Page
Cellular
phoneThis
system
Messages cannot be
viewed.
Message transfer is
not enabled on the
cellular phone.Enable message
transfer on the cellu-
lar phone (approve
message transfer on
the phone).

Automatic transfer
function on this sys-
tem is set to off.Set automatic trans-
fer function on this
system to on.162
New message notifi-
cations are not dis-
played.
Notification of SMS/
MMS/E-mail recep-
tion on this system is
set to off.Set notification of
SMS/MMS/E-mail
reception on this sys-
tem to on.
162
Automatic message
transfer function is
not enabled on the
cellular phone.Enable automatic
transfer function on
the cellular phone.
