Lexus HS250h 2010 Wide View Front Monitor System / LEXUS 2010 HS250H OWNERS MANUAL (OM75006U)

351
3-4. Using the hands-free phone system (for cellular phones)
3
Interior features
Setting or changing the PIN
■Setting a PIN
Select “Set PIN” using a voice command or .
Enter a PIN using a voice command or .
When using , input the code 1 digit at a time.
■Changing the PIN
Select “Set PIN” using a voice command or .
Enter the registered PIN using a voice command or .
Enter a new PIN using a voice command or .
When using , input the code 1 digit at a time.
Locking or unlocking the phone book
Select “Phonebook Lock (Phbk Lock)” or “Phonebook Unlock
(Phbk Unlock)” using a voice command or .
Input the PIN by either of th e follo
wing methods and select
“Confirm” using a voice command or :
a. Press the talk switch and say the registered PIN.
b. Input a new PIN using .

352
3-4. Using the hands-free phone system (for cellular phones)
Setting voice guidance volume
Select “Guidance Vol” using .
Change the voice guidance volume.
To decrease the volume: Turn counterclockwise.
To increase the volume: Turn clockwise.
Displaying the Bluetooth® device address and name
Select “Device Name” using .
Turn to display the Bluetooth
® device address and
name.
Select “Go Back” using to return to “System Setup”.
Initializing the system
Select “Initialize” and then “Confirm” using .
Select “Confirm” again using .

353
3-4. Using the hands-free phone system (for cellular phones)
3
Interior features
■Initialization
●The following data in the system can be initialized:
•Phone book
• Outgoing and incoming call history
•Speed dials
• Registered cellular phone data
•Security code
• Registered Bluetooth
® enabled portable player data
• Passkey for the cellular phones
• Passkey for the Bluetooth
® audio players
•Guidance volume
• Receiver volume
• Ring tone volume
●Once the initialization has been complete d, the data cannot be restored to its
original state.
■When the phone book is locked
The following functions cannot be used:
●Dialing by inputting a name
●Speed dialing
●Dialing a number stored in the call history memory
●Using the phone book

354
3-4. Using the hands-free phone system (for cellular phones)
Using the phone book
Adding a new phone number
The following methods can be used to add a new phone number:
●Inputting a phone number using a v
oice command
● T
ransferring data from the cellular phone
●Inputting a phone number using
●Selecting a phone number from ou tgoing or incoming call history
To enter the menu for each function , follow the steps below using a
voice command or
:
● A
dding a new phone number 
1. “Phonebook”  2. “
Add Entry”
● Changing the r
egistered name in the phone book 
1. “Phonebook”  2. “
Change Name”
● Listing the r
egistered data 
1. “Phonebook”  2. “List Names”
● Setting speed dials 
1. “Phonebook”  2. “
Set Speed Dial (Speed Dial)”
● D
eleting the registered data 
1. “Phonebook”  2. “Delete Entr
y”
● D
eleting speed dials 
1. “Phonebook”  2. “Delete Speed Dial (Del Spd Dial)”

355
3-4. Using the hands-free phone system (for cellular phones)
3
Interior features
■Adding procedure
Select “Add Entry” using a voice command or .
Use one of the following methods to input a telephone number:
Inputting a telephone number using a voice command:
STEP2-1 Select “By Voice” using a voice command or .
STEP2-2 Press the talk switch , say the desir
ed number, and
select “Confirm” using a voice command.
Transferring data from the cellular phone: STEP2-1 Select “By Phone” and then “
Confirm” using a voice
command or .
STEP2-2 Transfer the data from the cellular phone.
Refer to the manual that comes with the cellular phone for
the details of transferring data.
STEP2-3 Select the data to be registered by either of the follow- ing methods:
a. Say “Previous” or “Next” until the desired data is dis -
played, and select “Co nfirm
” using a voice com-
mand.
b. Select the desired data using .

356
3-4. Using the hands-free phone system (for cellular phones)
Inputting a phone number using :
STEP2-1 Select “Manual Input” using .
STEP2-2 Input a phone number using , and press
again.
Input the phone number 1 digit at a time.
Selecting a phone number from outgoing or incoming call history: STEP2-1 Select “Call History” using a v
oice command or
.
STEP2-2 Select “Outgoing” or “Incoming” using a v
oice com-
mand or .
STEP2-3 Select the data to be reg ister
ed by either of the follow-
ing methods:
a. Say “Previous” or “Go back” until the desir
ed data is
displayed, and select “Confirm” using a voice com-
mand.
b. Select the desired data using .

357
3-4. Using the hands-free phone system (for cellular phones)
3
Interior features
Select the name to be registered by either of the following meth-
ods, and select “Confirm” using a voice command or :
a. Press the talk switch and say the desired name.
b. Select “Record Name” using , and say the desired
name.
Select “Confirm” using a voice command or .
In , selecting “Set Speed Dial (Speed Dial)” instead of
“Confirm” registers the newly added phone number as a speed
dial.
Changing the registered name in the phone book
Select “Change Name” using a voice command or .
Select the name to be changed b
y either of the following meth-
ods, and select “Confirm” using a voice command or :
a. Press the talk switch, say the desired name.
b. Press the talk switch, and say “List Names”. When the desir
ed
name is read aloud, press the talk switch.
Press the talk switch or select “R
ecord Name” using ,
and say the new name.
Select “Confirm” using a voice command or .

358
3-4. Using the hands-free phone system (for cellular phones)
Listing the registered data
Select “List Names” using a voice command or . The list of the
registered data will be read aloud. 
When listing is complete, the sy stem r
eturns to the “Phonebook”.
Pressing the talk switch while the desir
ed data is being read aloud selects
the data, and the following fu nction will become available:
● Dialing: “Dial”
● Changing a r
egistered name: “Change Name”
● Deleting an entr
y: “Delete Entry”
● Setting a speed dial: “
Set Speed Dial (Speed Dial)”
Setting speed dials
Select “Set Speed Dial (Speed Di al)” using a voice command or
.
Select the data to be registered as a speed dial b
y either of the
following methods, and select “
Confirm” using a voice command
or :
a. Press the talk switch, say the desired name.
b. Press the talk switch, and say “List Names”. When the desir
ed
name is read aloud, press the talk switch.
Select the desired preset button, and register the data into speed
dial by either of the following methods:
a. Press the desired preset button, and select “
Confirm” by using
a voice command or .
b. Press and hold the desired preset button.

359
3-4. Using the hands-free phone system (for cellular phones)
3
Interior features
Deleting the registered data
Select “Delete Entry” using a voice command or .
Select the data to be deleted by either of the follo
wing methods,
and select “Confirm” using a voice command or :
a. Press the talk switch, and sa y the name of the desir
ed phone
number.
b. Press the talk switch, say “Li st Names”. When the name of the
desir
ed phone number is read aloud, press the talk switch.
Deleting speed dials
Select “Delete Speed Dial (Del Spd Dial)” using a voice com-
mand or .
Press the preset button to which th e desir
ed speed dial is regis-
tered, and select “Confirm” using a voice command or .
■Limitation of number of digits
A phone number that exceeds 24 digits cannot be registered.

360
3-5. Using the interior lights
Interior lights list
Front interior lights (P. 361)
Personal lights ( P. 361)
Remote touch light (when the “P O
WER” switch is in ACCESSORY
or ON mode)
Rear interior light
Door courtesy lights
Scuff lights (if equipped)
Footwell lights
Outer foot lights