phone Lexus HS250h 2012 Navigation Manual

SETUP
346
D
Transferring a phone number
You can transfer the phone numbers in
your Bluetooth rphone to the system.
The phonebook manages a maximum
of 4 phonebooks in all. The data for
1000 contacts (up to 3 numbers per
contact) can be registered in total of
phonebooks.
Transfer it while the hybrid system is oper-
ating.
U10114LC
1. Select “Transfer Contacts”.
U10115LC
2. Select “Replace Contacts” or “Add
Contacts”.
In case that the phonebook contains
phonebook data, this screen is displayed.
U10116LC
3. Transfer the phonebook data to the
system using the Bluetooth rphone.
This screen appears while transferring. To
cancel it, select “Cancel”. If the transfer-
ring is interrupted on the way, the phone-
book data transferred until then can be
memorized in the system.
When you have selected “Replace Con-
tacts”:
If your cellular phone does not support
PBAP or OPP service, you can not use this
function.
If your phone supports PBAP service, you
can transfer the phonebook data without
operating your phone.
If your phone does not support PBAP ser-
vice, you must transfer the phonebook
data by operating your phone.
When you have selected “Add Con-
tacts”:
If your cellular phone does not support
OPP service, you can not use this function.
You can transfer the phonebook data only
by operating your phone.
11 08.03HS250h_NAVI_U
75051U

SETUP
347
U10117LC
4. In case that you have selected “Add
Contacts”, this screen is displayed.
If you want to transfer another phone-
book, select “Yes”.When another Bluetooth
rdevice is
connected
U10119LC
When another Bluetooth rdevice is cur-
rently connected, this screen is displayed.
If you want to disconnect it, select “Yes”.
INFORMATION
Bluetooth raudio will disconnect dur-
ing transfer on phonebook data. In
this case, it will reconnect automati-
cally when data transfer finishes. (It
will not be reconnected depending
the phone you are using.)
11 08.03HS250h_NAVI_U
75051U
12

SETUP
348
D
Registering the phonebook data
You can register the phonebook data.
Up to 3 numbers per person can be reg-
istered.
U10120LC
1. Select “New Contact”.
U10121LC
2. Use the software keyboard to input
the name and select “OK”.
U10122LC
3. Input the phone number and select
“OK”.
If you want to use the tone signal after
the phone number, input the tone signal
too.
U10123LC
4. Select the phone type.
11 08.03HS250h_NAVI_U
75051U

SETUP
349
U10124LC
5. When two or less numbers in total
are registered to this contact, this
screen is displayed.
When you want to add a number to this
contact, select “Yes”.
DEditing the phonebook data
You can register the phone number in
“Phone#1”, “Phone#2” and “Phone#3”
separately.
U10125LC
1. Select “Edit Contacts”.
U10170LC
2. Select the data you want to edit.
11 08.03HS250h_NAVI_U
75051U
12

SETUP
350
U10127LC
3. Select “Edit” for the desired name
or number.
4. Edit the name or the number. (See “D
Registering the phonebook data” on
page 348.)
5. When you complete the edit, select
“Save”. You can also display the “Edit Contact”
screen in the following ways.
From “Contact Data” screen
1. Push the “MENU” button on the Re-
mote Touch, then select “Info./Phone”.
2. Select “Phone”.
3. Select “Contacts”.
4. Select the desired data from the list.
U10128LC
5. Select “Options”.
U10129LC
6. Select “Edit Contact”.
11 08.03HS250h_NAVI_U
75051U

SETUP
351
From “Call History” screen
1. Push the “MENU” button on the Re-
mote Touch, then select “Info./Phone”.
2. Select “Phone”.
3. Select “Call History”.
4. Select the desired number from the
list.
U10266LC
5. Select “Add Contact” or “Update
Contact”.
U10131LC
6. In case that you have selected “Up-
date Contact”, this screen is displayed.
Select the desired data from the list.
DDeleting the phonebook data
You can delete the data.
When you release your car, delete all
your data on the system.
U10132LC
1. Select “Delete Contacts”.
U10133LC
2. Select the desired data or select
“Select All”, then select “Delete”.
You can select multiple data and delete
them at the same time.
11 08.03HS250h_NAVI_U
75051U
12

SETUP
352
U10134LC
3. Select “Yes”.You can also delete it in the following
way.
1. Push the “MENU” button on the Re-
mote Touch, then select “Info./Phone”.
2. Select “Phone”.
3. Select “Contacts”.
4. Select the desired data from the list.
U10135LC
5. Select “Options”.
U10136LC
6. Select “Delete Contact”.
11 08.03HS250h_NAVI_U
75051U

SETUP
353
U10137LC
7. Select “Yes”.
INFORMATION
When you delete a Bluetoothrphone,
the phonebook data will be deleted at
the same time.
“Speed dials setting” is accessed from
the “Speed Dials” screen.
1. Push the “MENU” button on the Re-
mote Touch. (See “—Remote Touch”
on page 10.)
2. Select “Setup”.
3. Select “Phone”.
4. Select “Phonebook”.
U10138LC
5. Select “Manage Speed Dials”.
U10139LC
Please refer to the following pages for
each setting.
11 08.03HS250h_NAVI_U
75051U
— Speed dials setting
12

SETUP
354
You can also display the “Speed Dials”
screen in the following way.
1. Push the “MENU” button on the Re-
mote Touch, then select “Info./Phone”.
2. Select “Phone”.
3. Select “Speed Dials”.
U10140LC
4. Select “Options”.
DRegistering the speed dial
You can register the desired phone
number from phonebook. Up to 18
numbers per phone can be registered.
U10141LC
1. Select “New Speed Dial”.
U10142LC
2. Select the data you want to register.
11 08.03HS250h_NAVI_U
75051U

SETUP
355
U10143LC
3. Select the desired phone number.
U10144LC
4. Select the button you want to regis-
ter in.
U10145LC
5. If you select a button you registered
before, this screen is displayed.
Select “Yes” if you want to replace it.
U10146LC
6. When this screen is displayed, the
operation is complete.
11 08.03HS250h_NAVI_U
75051U
12