display Lexus IS F 2008 Navigation Manual

Finish
OTHER FUNCTIONS
135
2. Select the desired number from the
list.
Touchor pushof the steering
wheel.
DBy dialed numbers
You can call by dialed number. The sys-
tem memorizes up to 5 dialed numbers.
If it is more than 5, the oldest number is
deleted.
This cannot be operated while driving.
1. Touch “Call Log” to display “Outgo-
ing Calls” screen.
IS F/350/250_Navi_U
(L/O 0712)

Finish
OTHER FUNCTIONS
136
DWhen you call by phone book, the
name (if registered) is displayed.
DWhen you call the same number
continuously, only the newest number
is registered.
2. Select the desired number from the
list.
Touchor pushof the steering
wheel.
DBy received calls
You can call by received calls. When a
call is received, the system memorizes
up to 5 numbers. If it is more than 5, the
oldest number is deleted.
This cannot be operated while driving.
1. Touch “Call Log” to display “Outgo-
ing Calls” screen.
2. Touch “Incoming Calls” to display
the “Incoming Calls” screen.
IS F/350/250_Navi_U
(L/O 0712)

Finish
OTHER FUNCTIONS
137
DWhen a telephone number registered
in phone book is received, the name
and the number are displayed.
DReceived calls which you did not
answer are also memorized in the
system and “Abs.”is displayed on the
left side of the number.
DUnnoticed telephone number such as
a public telephone is not memorized in
the system.
3. Select the desired number from the
list.
Touchor pushof the steering
wheel.
DA international phone call may not be
made depending on the cellular phone
which you have.
DBy speed dial
You can call by registered telephone
number which you selected from a
phone book, dialed numbers and re-
ceived calls. (See “(a) Registering the
speed dial” on page 144 for registering
the speed dial.)
1. Touch “Speed Dial” to display
“Speed Dial” screen.
2. Touch the desired number to call.
You can change the page by touching
“Speed Dial 2” or “Speed Dial 3”.
When you push the telephone switch while
driving, the screen above appears. Touch
the desired name to call. (The telephone
number is not displayed.)
IS F/350/250_Navi_U
(L/O 0712)

Finish
OTHER FUNCTIONS
139
“Next” is displayed when multiple entries
are found for a searched name.
Up to 6 entries can be displayed including
the first searched one.
Do the following to change the entry to the
next one.
DTouch “Next”.
DPush the talk switch to say “Next Candi-
date”.
Calling without the voice recognition
After the entry number is displayed, you
can also call by pushing the telephone
switch or touching “Dial”.
Cancelling the voice recognition
The voice recognition will be cancelled
when you do the following.
DKeep on pushing the talk switch.
DPushof the steering wheel.
DTouch “Cancel”. (Except for recogniz-
ing the command.)
DSay “Cancel”. DIALING BY PHONE NUMBER
You can call by giving a desired num-
ber.
You: Push the talk switch.
System: “After the beep, please say the
number.”
You: “812387.”
System: “When ready, please briefly push the talk switch or push the
off−hook switch to dial.”
You: Push the talk switch.
System: “After the beep, please continue to add numbers or
say “Dial”.”
You: “Dial.”
System: “Dialing the number.”
Now you can call 812387.
IS F/350/250_Navi_U
(L/O 0712)

Finish
OTHER FUNCTIONS
140
SENDING A TONE
You can send a tone by giving a desired
number.
You: Push the talk switch.
System: “Say numbers, pound, or star.”
You: “1234.”
System: “1234.” “Push the talk switch.”
You: Push the talk switch.
System: “Send? Say “Yes” or “No”.”
You: “Yes.”
System: “Sending.”
Now you can send the tone.
DBy POI call
You can call by touchingwhen it is
displayed on the screen from naviga-
tion system. (See page 30 for details.)
IS F/350/250_Navi_U
(L/O 0712)

Finish
OTHER FUNCTIONS
141
When a call is received, this screen is
displayed with a sound. Touch
or
push
of the steering wheel to talk on
the phone.
To hang up the phone:
Touch
or pushof the steering
wheel again.
To refuse to receive the call: Touch
and hold it.
To adjust the volume of received call: Touch
“–”or“+”or use the volume
switch of the steering wheel.
On the international phone call, the other
party’s name may not be displayed cor-
rectly depending on the cellular phone
which you have.
While you are talking on the phone, this
screen is displayed. You can do the op-
eration below on the screen.
To adjust the volume of the other party’s
voice: Touch
“–”or“+”or use the volume
switch of the steering wheel.
To hang up the phone: Touch
or pushof the steering
wheel.
To mute your voice: Touch “Mute” .
To input a Key: Touch “0−9”.
To transfer the call Touch “Transfer Call” .
You cannot change from Hands −free call
to cellular phone call while driving.
When you change from cellular phone call
to Hands −free call, the Hands −free screen
will be displayed and you can operate it on
the screen.
Transferring method and behavior are dif-
ferent depending on the cellular phone
which you have.
For the operation of the phone, see the
manual that comes with your cellular
phone.
IS F/350/250_Navi_U
(L/O 0712)
— Receive on the
Bluetooth rphone — Talk on the Bluetooth
r
phone

Finish
OTHER FUNCTIONS
142
Touch the desired number to input the key.
To hang up the phone:Touch
or pushof the steering
wheel.
This cannot be operated while driving.
If the continuous tone signal is regis-
tered in a phone book, this screen ap-
pears. (If not registered, “Send” and
“Exit” are not displayed.)
Confirm the number displayed on the
screen and touch “Send”. The number
before marked sign will be sent.
When you touch “Exit”, this function will
be finished and normal tone screen ap-
pears.
To hang up the phone:
Touch
or pushof the steering
wheel.
The continuous tone signal is the marked
sign (p or w) and the number following tele-
phone number. (ex. 056133p0123w#1
:)
You can do this operation when you want
to operate an answering machine or use a
telephone service in bank for example.
You can register the phone number and
the code number in the phone book.
IS F/350/250_Navi_U
(L/O 0712)

Finish
OTHER FUNCTIONS
143
D
Sending a tone by the speed tone
You can send a tone by the speed tone.
(For registering the speed tone, see “(b)
Registering the speed tone” on page
146.)
1. Touch “Speed Tone”.
2. Touch the desired switch to send a
tone.
Touch “Settings” to display “Settings”
screen.
You can change the settings of the
phone.
IS F/350/250_Navi_U
(L/O 0712)
— Change the settings of
the Bluetooth rphone

Finish
OTHER FUNCTIONS
144
(a) Registering the speed dial
You can register the desired telephone
number from phone book, dialed num-
bers and received calls. Up to 17 speed
dial numbers can be registered.
The 6th entry is the speed dial for redialing.
1. Touch “Speed Dial” to display the
“Speed Dial Settings” screen.
2. Touch “Register” of “Speed Dial”.
3. Select the data you want to register.
4. Touch the desired telephone num-
ber.
5. Touch the touch−screen button you
want to register in.
The latest dialed number is registered in
the 6th item (speed redial).
If you select a touch− screen button you
registered before, this screen is dis-
played.
6. Touch “Yes” if you want to overwrite
it.
IS F/350/250_Navi_U
(L/O 0712)

Finish
OTHER FUNCTIONS
149
(c) Setting the volume
1. Touch “Volume” to display the “Vol-
ume Settings” screen.
2. Touch “−” or “+” to adjust the “Voice
Volume” or “Ring Volume”.
“Voice Volume” Adjusting the other .....
party’s voice.
“Ring Volume” Adjusting the ring .....
volume.
DAutomatic volume settings for high
speed
You can set the volume one step up
when the speed is over 50 mph (80
km/h) . (When it is under 43 mph (70
km/h), previous volume is back.)
Each time you touch “Adaptive Volume
Control” , you can switch on or off.
IS F/350/250_Navi_U
(L/O 0712)