display Lexus IS300h 2014 Navigation manual

95
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
No.FunctionPage
Select to search for a destination.116
Select to suspend or resume guidance.135
Select to change routes and/or destinations and to view route over-
view.144
Select to enable changes to “Home”, “Memory points”, “Quick access”,
“Area to avoid”, etc.150
Select to set the desired map configuration.99
Select to set the Points of Interest to be displayed on the screen.104
Select to start/stop recording the route trace.106
Select to register the current position or the cursor position as a mem-
ory point. Can be changed to a desired name, icon, etc.150
IS_Navi_EE_53C71E.book 95 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

96
1. BASIC OPERATION
IS300h/250_Navi_EE
2. MAP SCREEN OPERATION
1Press the “MENU” button on the
Remote Touch.
2Select “Nav”.
3Check that the current position map is
displayed.
zSelect if the navigation menu
screen is displayed.
CURRENT POSITION DISPLAY
zTo correct the current position manually:
→P.1 7 3
INFORMATION
●
While driving, the current position mark
is fixed on the screen and the map moves.
●The current position is automatically set
as the vehicle receives signals from the
GPS (Global Positioning System). If the
current position is not correct, it is auto-
matically corrected after the vehicle
receives signals from the GPS.
●After 12-volt battery disconnection, or on
a new vehicle, the current position may
not be correct. As soon as the system
receives signals from the GPS, the cor-
rect current position is displayed.
IS_Navi_EE_53C71E.book 96 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

97
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Select or to change the
scale of the map screen.
zThe scale indicator bar appears at the bot-
tom of the screen.
zSelect and hold or to continue
changing the scale of the map screen.
zThe scale of the map screen can also be
changed by selecting the scale bar directly.
: Select to display the entire route, if
the destination has been set.
1Select to display the city map.
zTo return to the normal map display, select
.
MAP SCALE
INFORMATION
●
Press the “” button on the Remote
Touch to zoom in on the map screen and
the “” button to zoom out.
●When the map scale is at the minimum
range, a one way street is displayed by
.
CITY MAP
The city map is available for some major
cities. When a map scale of 50 yd. (50
m) is selected, the map display will
change to the city map in either 2D or
3D.
IS_Navi_EE_53C71E.book 97 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

98
1. BASIC OPERATION
IS300h/250_Navi_EE
1Select , or .
XNorth-up screen
XHeading-up screen
X3D screen: North-up symbol
Regardless of the direction of vehicle travel,
north is always up.
: Heading-up symbol (When in 2D map
mode.)
The direction of vehicle travel is always up.
A red arrow indicates north.
: Heading-up symbol (When in 3D map
mode.)
The direction of vehicle travel is always up.
A red arrow indicates north.
ORIENTATION OF THE MAP
The orientation of the map can be
changed between 2D north-up, 2D
heading-up and 3D heading-up by se-
lecting the orientation symbol displayed
at the top left of the screen.
IS_Navi_EE_53C71E.book 98 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

99
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
1Select “Menu” on the map screen.
2Select “Map Configuration”.
3Select the desired item.
zDepending on the conditions, certain con-
figuration screen buttons cannot be
selected.
SWITCHING MAP
CONFIGURATIONSNo.FunctionPage
Select to display the single
map screen.100
Select to display the dual
map screen.100
Select to display the com-
pass mode screen.101
Select to display the turn list
screen.142
Select to display the arrow
screen.142
Select to display the motor-
way information screen.140
Select to display the inter-
section guidance screen or
the guidance screen on the
motorway.
141
IS_Navi_EE_53C71E.book 99 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

100
1. BASIC OPERATION
IS300h/250_Navi_EE
■SINGLE MAP
■DUAL MAP
zThe map on the left is the main map.
XEditing right map
1Select any point on the right side map.
2Select the desired item.
The right side map can be edited.
No.FunctionPage
Select to change the orien-
tation of the map.98
Select to display POI icons.104
Select to show traffic infor-
mation.177
Select to change the map
scale.97
IS_Navi_EE_53C71E.book 100 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

101
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
■COMPASS
zTo scroll over the map, place the cursor
mark in the desired position and then press
and hold the Remote Touch knob. The map
will continue scrolling in that direction until
the knob is released.
Information about the destination, cur-
rent position and a compass is displayed
on the screen.
INFORMATION
●
The destination mark is displayed in the
direction of the destination. When driv-
ing, refer to the longitude and latitude
coordinates, and the compass, to make
sure that the vehicle is headed in the
direction of the destination.
●When the vehicle travels out of the cover-
age area, the guidance screen changes to
the compass mode screen.
SCREEN SCROLL
OPERATION
Use the scroll feature to move the de-
sired point to the centre of the screen for
looking at a point on the map screen that
is different from the current position.
No.Information/FunctionPage
Cursor mark
Select to register the cursor
location as area to avoid.102
Select to return to the cur-
rent position. 
Select to register as a mem-
ory point. To change the
icon, name, etc.: →P.156

Select to set as a destina-
tion.131
Distance from the current
position to the cursor mark
IS_Navi_EE_53C71E.book 101 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

104
1. BASIC OPERATION
IS300h/250_Navi_EE
3. MAP SCREEN INFORMATION
1Select “Menu” on the map screen.
2Select “Show POI”.
3Select the desired POI categories and
select “OK”.
DISPLAYING POI ICONS
POI icons such as petrol stations and
restaurants can be displayed on the map
screen. Their location can also be set as
a destination and used for route guid-
ance.
No.Information/FunctionPage
Displays up to 5 selected
POI icons on the map
screen

Select to turn the POI icons
on the map screen off.
Displays up to 6 POI icons
as favourite POI categories172
Select to display other POI
categories if the desired
POIs cannot be found on
the screen.
105
Select to search for the
nearest POIs. Then select
one of the categories.
105
IS_Navi_EE_53C71E.book 104 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

105
1. BASIC OPERATION
IS300h/250_Navi_EE
NAVIGATION SYSTEM
3
■SELECTING OTHER POI ICONS
TO BE DISPLAYED
1Select “Other POI’s”.
2Select the desired POI categories and
select “OK”.
“List all categories”: Select to display all
POI categories. To add more POI catego-
ries, select “More”.
■DISPLAYING THE LOCAL POI
LIST
1Select “List nearest POI’s”.
2Select the desired POI.
“On this route”: Select to search for POIs
along the route. When set to on, the indica-
tor will illuminate.
3Check that the selected POI is dis-
played on the map screen. (→P.101)
POIs that are within 20 miles (30 km) of
the current position will be listed from
among the selected categories.
IS_Navi_EE_53C71E.book 105 ページ ２０１４年５月２９日　木曜日　午前１１時２２分

106
1. BASIC OPERATION
IS300h/250_Navi_EE
1Select “Menu” on the map screen.
2Select “Start route trace”.
3Check that the traveled line is displayed.
■STOP RECORDING THE ROUTE
TRACE
1Select “Stop route trace”.
2A confirmation screen will be displayed.
“Yes”: Select to keep the recorded route
trace.
“No”: Select to erase the recorded route
trace.
ROUTE TRACE
Up to 124 miles (200 km) of the trav-
eled route can be stored and retraced
on the display. This feature is available
when the map scale is 30miles (50 km)
or less.
START RECORDING THE
ROUTE TRACE
zTo edit the route trace name or confirm
the start point, etc.: →P.1 6 5
IS_Navi_EE_53C71E.book 106 ページ ２０１４年５月２９日　木曜日　午前１１時２２分