8-2 Lexus IS300h 2017 Service Manual

6068-2. Steps to take in an emergency
IS300h_EE(OM53D89E)
Con-
tinuous
An attempt was made to lock the
doors using the smart entry & start
system while the electronic key was still inside the vehicle.
 Retrieve the electronic key
from the vehicle and lock the doors again.
OnceCon-
tinuous
An attempt was made to lock either
front door by opening a door and
putting the inside lock button into the lock position, then closing the
door by pulling on the outside door
handle with the electronic key still inside the vehicle.
 Retrieve the electronic key
from the vehicle and lock the doors again.
Once
The electronic key has a low battery.
 Replace the electronic key bat-
tery. ( P. 549)
Once
The steering lock could not be
released within 3 seconds of the power switch being pressed.
 Press the power switch while
depressing the brake pedal and moving the steering wheel left
and right.
Interior buzzerExteriorbuzzerWarning messageDetails/Actions
(Vehicles with the entry function)
(Flashes)

6078-2. Steps to take in an emergency
8
When trouble arises
IS300h_EE(OM53D89E)
Once
• When the doors were unlocked
with the mechanical key and then
the power switch was pressed, the electronic key could not be
detected in the vehicle.
• The electronic key could not be detected in the vehicle even after
the power switch was pressed two
consecutive times.  Touch the electronic key to the
power switch while depressing
the brake pedal.
Once
During a hybrid system starting pro- cedure in the event that the elec-
tronic key was not functioning
properly ( P. 629), the power switch was touched with the elec-
tronic key.
 Press the power switch within 10 seconds of the buzzer sounding.

Indicates that:• With the power switch off, the
doors were unlocked and then the
driver’s door was opened and closed;
• The power switch was turned to
ACCESSORY mode without starting the hybrid system; or
• The shift lever was shifted to P
from another position with the power switch in ON mode.
 Press the power switch while
depressing the brake pedal.
Interior buzzerExteriorbuzzerWarning messageDetails/Actions

6088-2. Steps to take in an emergency
IS300h_EE(OM53D89E)
Once
The power switch has been turned off with the shift lever in a position
other than P.
 Shift the shift lever to P.
Once
After the power switch has been turned off with the shift lever in a
position other than P, the shift lever
has been shifted to P.  Turn the power switch off.

Power was turned off due to the
automatic power off function.
 Next time when starting the hybrid system, increase the
engine speed slightly and main-
tain that level for approximately 5 minutes to recharge the 12-
volt battery.
Con-
tinuous
Indicates that the hybrid system was
stopped in an emergency while driv- ing
 To restart the hybrid system,
shift the shift lever to N and turn the power switch to ON mode.*
Once
Indicates that the power switch has
been pressed while driving  Except when emergency stop-
ping of the vehicle is needed,
immediately release the power switch.
InteriorbuzzerExteriorbuzzerWarning messageDetails/Actions
(Flashes)
(Flashes)
(Flashes)
(Flashes)

6098-2. Steps to take in an emergency
8
When trouble arises
IS300h_EE(OM53D89E)
*: The hybrid system may not be restarted depending on the vehicle condition.
■Warning messages
 P. 603
■Warning buzzer
 P. 579
Once
An attempt was made to start the
engine with the shift lever in an
incorrect position.  Shift the shift lever to P and start
the engine.
Interior buzzerExteriorbuzzerWarning messageDetails/Actions
(Flashes)

6108-2. Steps to take in an emergency
IS300h_EE(OM53D89E)
If you have a flat tire (vehicles with emergency tire
puncture repair kit)
Your vehicle is not equipped with a spar e tire, but instead is equipped with an
emergency tire puncture repair kit.
A puncture caused by a nail or screw passing through the tire tread can be
repaired temporarily with the emer gency tire puncture repair kit.
WARNING
■If you have a flat tire
Do not continue driving with a flat tire.
Driving even a short distance with a flat ti re can damage the tire and the wheel beyond
repair, which could result in an accident.

6118-2. Steps to take in an emergency
8
When trouble arises
IS300h_EE(OM53D89E)
●Stop the vehicle in a safe place on a hard, flat surface.
●Set the parking brake.
●Shift the shift lever to P.
●Stop the hybrid system.
●Turn on the emergency flashers. (P. 566)
●Check the degree of the tire damage.
A tire should only be repaired with
the emergency tire puncture repair
kit if the damage is caused by a nail
or screw passing through the tire
tread.
• Do not remove the nail or screw
from the tire. Removing the
object may widen the opening
and disenable emergency repair
with the kit.
• To avoid sealant leakage, move the vehi cle until the area of the puncture, if
known, is positioned at the top of the tire.
■A flat tire that cannot be repaired with the emergency tire puncture repair kit
In the following cases, the tire cannot be repaired with the emergency tire puncture
repair kit. Contact any authorized Lexus retaile r or Lexus authorized repairer, or any reli-
able repairer.
●When the tire is damaged due to driving without sufficient air pressure
●When the tire lost air pressure due to a crack or damage in the tire sidewall
●When the tire is visibly separated from the wheel
●When the cut or damage to the tread is 4 mm (0.16 in.) long or more
●When the wheel is damaged
●When two or more tires have been punctured
●When there is more than one hole or cut in the damaged tire
Before repairing the vehicle

6128-2. Steps to take in an emergency
IS300h_EE(OM53D89E)
Location of the emergency tire puncture repair kit
Emergency tire puncture repair kit components
Hose
Air release cap
Air pressure gauge
Compressor switch
Power plug
Stickers
1
2
3
4
5
6

6138-2. Steps to take in an emergency
8
When trouble arises
IS300h_EE(OM53D89E)
Remove the 12-volt battery cover.
Remove the band and take out the
emergency tire puncture repair kit.
Taking out the emergency tire puncture repair kit
1
2

6148-2. Steps to take in an emergency
IS300h_EE(OM53D89E)
Take out the repair kit from the tool box.
Remove the valve cap from the valve
of the punctured tire.
Remove the protective film from the
bottle and extend the hose. Remove
the air release cap from the hose.
Attach the sticker enclosed with the bot-
tle on the specified locations. (See step
9.)
You will use the air release cap again.
Therefore keep it in a safe place.
Connect the hose to the valve.
Screw the end of the hose clockwise as
far as possible.
Emergency repair method
1
2
3
4

6158-2. Steps to take in an emergency
8
When trouble arises
IS300h_EE(OM53D89E)
Make sure that the compressor
switch is off.
Remove the power plug from the
compressor.
Connect the power plug to the
power outlet socket. ( P. 492)
5
6
7