lexus LC500 2018 Navigation Manual

141
4
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
Audio/visual system
SORY or IGNITION ON mode , the system automatically recon-nects the portable player.
●If the Bluetooth® device is disconnected
on purpose, such as it was turned off, this does not happen. Reconnect the porta-ble player manually.
●Bluetooth® device information is regis-
tered when the Bluetooth® device is
connected to the Bluetooth® audio sys-
tem. When selling or disposing of the
vehicle, remove the Bluetooth® audio
information from the system. ( P.59)
●In some situations, sound output via the
Bluetooth® audio system may be out of sync with the connected device or output intermittently.
To use the Bluetooth® audio system, it
is necessary to register a Bluetooth®
device with the system.
Registering an additional device
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Add New Device”.
5 For more information: P.44
Selecting a registered device
1 Select “Connect” on the sub menu.
2 Select the device to be connected.
WARNING
●Do not operate the player’s controls or
connect to the Bluetooth® audio sys-
tem while driving.
●Your audio unit is fitted with
Bluetooth® antennas. People with
implantable cardiac pacemakers, car- diac resynchronization therapy-pace-makers or implantable cardioverter
defibrillators should maintain a reason- able distance between themselves and
the Bluetooth® antennas. The radio waves may affect the operation of such devices.
●Before using Bluetooth® devices, users of any electrical medical device other than implantable cardiac pace-
makers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should con-
sult the manufacturer of the device for information about its operation under the influence of radio waves. Radio
waves could have unexpected effects on the operation of such medical devices.
NOTICE
●Do not leave your portable player in the vehicle. In particular, high tempera-tures inside the vehicle may damage
the portable player.
Connecting a Bluetooth®
device

142
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
Select to display the audio source
selection screen. ( P.121)
Select to return to the control
screen.
Select to display a file list screen.
Select to display the play mode
selection screen.
Select to display the portable
device connection screen.
Select to display the sound setting
screen. ( P.123)
●Miracast™ is a trademark of Wi-Fi Alli-
ance®.
●Miracast™ performs wireless communi- cation using the same 2.4 GHz radio fre-
quency band as Bluetooth®. Depending
on the usage environment, radio wave interference may occur, resulting in image distortion and audio stuttering. If
interference occurs, connecting a
Bluetooth® cellular phone or portable
device that is registered with the naviga- tion system may reduce the effects.
●When “Access to network” ( P.52) is set
to “On”, Wi-Fi® network connection
communication and Miracast™ commu- nication may affect each other, causing image distortion and audio stuttering. If
this occurs, setting “Access to network” to “Off” may reduce the effects.
The Miracast™ control screen can be
reached by the following methods:
Using the audio control switch
1 Press the “MEDIA” button.
Sub menu
A
B
C
D
E
F
Miracast™
Miracast™ is a function that
enables the Headunit to display
smartphone’s screen and play the
smartphone’s sound by connecting
the smartphone to the Headunit
with Wi-Fi® connection (P2P
mode).
This function is not available if the
smartphone is not certified by Wi-Fi
Alliance as Miracast™ device.
The system can only output the
sound while driving.
Overview

143
4
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
Audio/visual system
Using the Remote Touch
1 Press the “MENU” button on the
Remote Touch, then select “Media”.
 Connecting a Miracast™ device
( P.143)
Select to disconnect the Miracast™
device.
Select to change the screen size.
( P.124)
Select to display/hide the control
button.
Select to display the image quality
adjustment screen. ( P.125)
●The Miracast™ sound volume takes into account the sound volume of both the
navigation system and the connected device. Before using Miracast™, adjust the sound volume of the connected
device to an appropriate level.
●When a device that uses Bluetooth® audio is used with Miracast™, no sound may be output from Miracast™. If this
occurs, disabling the Bluetooth® audio may allow sound to be output from
Miracast™.
1 Display the audio source selection
screen.
2 Select “Miracast™”.
3 When a message is displayed,
select “Yes” to turn Wi-Fi® on.
4 Devices that support Miracast™
can now be connected.
 Refer to the instruction manual
included with the external device for
details on how to operate the
device.
 When a device cannot be found,
Control screen
A
B
C
D
WARNING
●Do not connect portable audio device or operate the controls while driving.
NOTICE
●Depending on the size and shape of the portable audio device that is con-
nected to the system, the console box may not close fully. In this case, do not forcibly close the console box as this
may damage the portable audio device or the terminal, etc.
●Do not leave portable audio device in the vehicle. The temperature inside the
vehicle may become high, resulting in damage to the player.
●Do not push down on or apply unnec-essary pressure to the portable audio
device while it is connected as this may damage the portable audio device or its terminal.
●Do not insert foreign objects into the
port as this may damage the portable audio device or its terminal.
Connecting a Miracast™ device

144
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
select “Search again”.
5 After checking the device name,
select “Yes”.
The Miracast™ screen displays the
same image that is sent from the exter-
nal device. If the external device screen
is vertically-oriented, the screen may
also display a vertical image.
The AUX control screen can be
reached by the following methods:
Using the audio control switch
1 Press the “MEDIA” button.
Using the Remote Touch
1 Press the “MENU” button on the
Re m ot e T ou ch , th e n se l ec t “M e d ia ”.
 Connecting a device to the AUX
port ( P.122)
Miracast™ screen display
AUX
Overview
Control screen
WARNING
●Do not connect portable audio device or operate the controls while driving.
NOTICE
●Depending on the size and shape of the portable audio device that is con-
nected to the system, the console box may not close fully. In this case, do not forcibly close the console box as this
may damage the portable audio device or the terminal, etc.

145
4
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
Audio/visual system
Select to display the audio source
selection screen. ( P.121)
Select to return to the control
screen.
Select to display the sound setting
screen. ( P.123)
NOTICE
●Do not leave portable audio device in the vehicle. The temperature inside the vehicle may become high, resulting in
damage to the player.
●Do not push down on or apply unnec- essary pressure to the portable audio device while it is connected as this may
damage the portable audio device or its terminal.
●Do not insert foreign objects into the port as this may damage the portable
audio device or its terminal.
Sub menu
A
B
C

146
-$@-$I@/BWJ@0.&@ &&

4-4. Audio/visual remote controls
4-4.A udio/visual remote controls
Some parts of the audio/visual system
can be adjusted using the switches on
the steering wheel.
Volume control switch
“MODE” switch
“< >” switch
Steering switches
Steering switch operation
ModeOperation/function
All
Press: Volume up/down
Press and hold (0.8 sec. or
more): Volume up/down
continuously
ModeOperation/function
AM, FM,
DAB, AUX
Press: Change audio
modes
Press and hold (0.8 sec. or
more): Mute
A
B
CD,
MP3/WMA/
AAC disc,
DVD, USB,
iPod,
Bluetooth®
audio
Press: Change audio
modes
Press and hold (0.8 sec. or
more): Pause
Miracast™Press: Change audio mode
ModeOperation/function
AM, FM
Press: Preset station
up/down (Presets screen)
Station list up/down (Sta-
tion list screen)
Seek up/down (Manual
tuning screen)
Press and hold (0.8 sec. or
more): Seek up/down con-
tinuously while the switch is
being pressed (Manual
tuning screen)
DAB
Press: Preset service
up/down (Presets screen)
Service list up/down (Sta-
tion list screen)
Ensemble seek up/down
(Manual tuning screen)
Press and hold (0.8 sec. or
more): Ensemble seek
up/down continuously
while the switch is being
pressed (Manual tuning
screen)
ModeOperation/function
C

147
4
-$@-$I@/BWJ@0.&@ &&

4-4. Audio/visual remote controls
Audio/visual system
CD
Press: Track up/down
Press and hold (0.8 sec. or
more): Fast for-
ward/rewind
MP3/WMA/
AAC disc
Press: File up/down
Press and hold (0.8 sec. or
more): Fast for-
ward/rewind
DVD
Press: Chapter up/down
Press and hold (0.8 sec. or
more): Fast for-
ward/rewind
USB
Press: File/Track up/down
Press and hold (0.8 sec. or
more): Fast for-
ward/rewind
iPod
Press: Track/File up/down
Press and hold (0.8 sec. or
more): Fast for-
ward/rewind
Bluetooth®
audio
Press: Track up/down
Press and hold (0.8 sec. or
more): Fast for-
ward/rewind
ModeOperation/function

148
-$@-$I@/BWJ@0.&@ &&

4-5. Setup
4-5.Setup
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Audio” on the sub menu.
4 Select the desired item to be set.
Select to set the common settings.
( P.148)
Select to set detailed FM radio set-
tings. ( P.149)
Select to set detailed DAB settings.
( P.149)
Select to set detailed DVD settings.
( P.150)
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Audio” on the sub menu.
4 Select “Common”.
5 Select the desired item to be set.
Select to set the cover art display
on/off.
Select to prioritize the display of
information from the Gracenote
database.
Select to change the screen size.*
( P.124)
Select to display the image quality
adjustment screen.* ( P.125)
*: Only in DVD video, USB video or
Miracast™ mode.
Audio settings
Detailed audio settings can be pro-
grammed.
Displaying the audio settings
screen
Audio settings screen
A
B
Common settings
C
D
A
B
C
D

149
4
-$@-$I@/BWJ@0.&@ &&

4-5. Setup
Audio/visual system
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Audio” on the sub menu.
4 Select “FM”.
5 Select the desired button to be set.
Select “Broadcaster” or “Alphabet-
ical” to set the listing order of the
station list.
The tuner will automatically seek a
station that regularly broadcasts
traffic information and the station
broadcasts when the traffic infor-
mation program starts.
A station providing good reception
is automatically selected if current
reception worsens.
Select to switch to a broadcasting
station within the same local pro-
gram network.
Select on/off to set the FM Radio
text feature.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Audio” on the sub menu.
4 Select “DAB”.
5 Select the desired button to be set.
Select on/off to set L-band in the
tune range. When “Off” is selected,
the physical channel range for tun-
ing operations is limited to Band III,
excluding for preset operations.
When “On” is selected, the physical
channel range fo r tuning opera-
tions includes Band III and L-band.
The tuner will automatically seek a
station that regularly broadcasts
traffic information and the station
broadcasts when the traffic infor-
mation program starts.
A station providing good reception
is automatically selected if current
reception worsens.
Select on/off to set the DAB text
feature.
FM radio settings
A
B
C
D
E
DAB settings
A
B
C
D

150
-$@-$I@/BWJ@0.&@ &&

4-5. Setup
1Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Audio” on the sub menu.
4 Select “DVD”.
5 Select the items to be set.
Select to change the audio lan-
guage. ( P.150)
Select to change the subtitle lan-
guage. ( P.150)
Select to change the language of
the DVD video menu. ( P.150)
Select to set the angle mark on/off.
Select to set the parental control
level. ( P.151)
Select to set the auto start playback
on/off.
Discs that are inserted while the
vehicle is in motion will automati-
cally start playing. Certain discs
may not play.
Select to set a dynamic range.
( P.151)
Select to initialize all menus.
1 Select “Audio language”.
2 Select the desired language to be
heard.
 If the desired language to be heard
cannot be found on this screen,
select “Other” and enter a language
code. ( P.151)
1 Select “Subtitle language”.
2 Select the desired language to be
read.
 If the desired language to be read
cannot be found on this screen,
select “Other” and enter a language
code. ( P.151)
1 Select “Menu language”.
2 Select the desired language to be
read.
 If the desired language to be read
cannot be found on this screen,
select “Other” and enter a language
code. ( P.151)
DVD settings
A
B
C
D
E
F
Audio language
Subtitle language
Menu language
G
H