ESP lexus LC500 2018 Navigation Manual

9
-$@-$I@/BWJ@0.&@ &&

*2:LC500h
To use this system in the safest possible
manner, follow all the safety tips shown
below.
This system is intended to assist in
reaching the destination and, if used
properly, can do so. The driver is solely
responsible for the safe operation of
your vehicle and the safety of your pas-
sengers.
Do not use any feature of this system to
the extent it becomes a distraction and
prevents safe driving. The first priority
while driving should always be the safe
operation of the vehicle. While driving,
be sure to observe all traffic regula-
tions.
Prior to the actual use of this system,
learn how to use it and become thor-
oughly familiar with it. Read the entire
manual to make sure you understand
the system. Do not allow other people
to use this system until they have read
and understood the instructions in this
manual.
For your safety, some functions may
become inoperable when driving.
Unavailable screen buttons are
dimmed.
While driving, listen to the voice
instructions as much as possible and
glance at the screen briefly and only
when it is safe. However, do not totally
rely on voice guidance. Use it just for
reference. If the system cannot deter-
mine the current position correctly,
there is a possibility of incorrect, late,
or non-voice guidance.
The data in the system may occasion-
ally be incomplete. Road conditions,
including driving restrictions (no left
turns, street closures, etc.) frequently
change. Therefore, before following
any instructions from the system, look
to see whether the instruction can be
done safely and legally.
This system cannot warn about such
things as the safety of an area, condi-
tion of streets, and availability of emer-
gency services. If unsure about the
safety of an area, do not drive into it.
Under no circumstances is this system
a substitute for the driver’s personal
judgement.
Use this system only in locations where
it is legal to do so. Some areas may
have laws prohibiting the use of naviga-
tion screens next to the driver.
Safety instruction
WARNING
●Exercise extreme caution if operating the system while driving. Insufficient
attention to the road, traffic or weather conditions may cause an accident.
●While driving, be sure to obey the traf-fic regulations and maintain awareness
of the road conditions. If a traffic sign on the road has been changed, route guidance may not have the updated
information such as the direction of a one way street.

18
-$@-$I@/BWJ@0.&@ &&

1-1. Basic function
The reception level of the con-
nected phone display ( P.18)
Remaining battery charge display
( P.19)
Bluetooth® phone connection
condition display ( P.19)
Wi-Fi® connection condition dis-
play ( P.18)
Shown during data communication
performed via Miracast™ ( P.18)
●The number of status icons that can be displayed differs depending on the dis-
played screen.
The level of reception does not always
correspond with the level displayed on
the cellular phone. The level of recep-
tion may not be displayed depending
on the phone you have.
When the cellular phone is out of the
service area or in a place inaccessible
by radio waves, is displayed.
“Rm” is displayed when receiving in a
roaming area. While roaming, display
“Rm” top-left on the icon.
The receiving area may not be dis-
played depending on the type of phone
you have.
While connected with cellular
phone
When using Wi-Fi®
When using Miracast™
Status icon
Status icons are displayed at the top
of the screen.
Status icon explanation
Reception level display
A
B
C
D
E
LevelIndicators
No connection
Poor
Excellent
LevelIndicators
No connection
Poor
Excellent
LevelIndicators
No connection

19
1
-$@-$I@/BWJ@0.&@ &&

1-1. Basic function
Quick guide
●When Wi-Fi®/Miracast™ function is off, no item is displayed.
The amount displayed does not always
correspond with the amount displayed
on the Bluetooth® device.
The amount of battery charge left may
not be displayed depending on the
type of the Bluetooth® device con-
nected.
This system does not have a charging
function.
An antenna for the Bluetooth® con-
nection is built into the instrument
panel.
The condition of the Bluetooth® con-
nection may deteriorate and the sys-
tem may not function when a
Bluetooth® phone is used in the fol-
lowing conditions and/or places:
The cellular phone is obstructed by
certain objects (such as when it is
behind the seat or in the glove box or
console box).
The cellular phone is touching or is
covered with metal materials.
Leave the Bluetooth® phone in a place
where the condition of the Bluetooth®
connection is good.
Poor
Excellent
Remaining battery charge dis-
play
Remaining chargeIndicators
Empty
Low
Full
Bluetooth® connection condition
display
LevelIndicators
Indica-
torsConditions
(Blue)
Indicates that the condition of
the Bluetooth® connection is
good.
(Gray)
While in this condition, sound
quality during phone calls may
deteriorate.
Indicates that the cellular phone
is not connected via Bluetooth®.

28
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
2-1.Basic information before operation
After a few seconds, the “CAUTION”
screen will be displayed.
Waiting about 5 seconds or selecting
“Continue” switches to the last dis-
played screen.
When system response is extremely
slow, the system can be restarted.
1 Press and hold the “PWR•VOL”
knob for 3 seconds or more.
1 Use the touchpad of the Remote
Touch to select the desired button
on the screen.
2 The buttons on the screen can be
selected by either depressing or
double tapping on the touchpad.
Once a button has been selected,
the screen will change.
 When the pointer moves close to a
button, it will automatically snap to
Initial screen
When the engine switch switch> is turned to ACCESSORY
or IGNITION ON mode mode>, the initial screen will be dis-
played and the system will begin
operating.
Caution screen
WARNING
●When the vehicle is stopped with the engine running operating>, always apply the parking brake for safety.
Restarting the system
How to use the Remote
Touch
This system can be operated by the
Remote Touch when the engine
switch is in ACCES-
SORY or IGNITION ON mode
.
Touchpad operation

31
2
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
Basic function
Sub menu
Selecting the sub menu item switches the information displayed on the main display.
The displayed items differ according to the function.
Main display
For details about the functions and operation of the main display, refer to the respective
Operating the screen
The screen can be operated in full screen or split-screen mode.
Split-screen mode can display di fferent information side-by-side.
 When the split-screen is displayed, it is necessary to select the screen you
wish to operate.
Names and operations of each part
A
B

36
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
2Select the desired candidate.
 To select a candidate that is not dis-
played, select , and then
select the desired predictive
replacement candidate.
*: These functions are not available in
some languages.
Characters can be entered by hand
writing with an optional tool. For
details, contact any Lexus retailer or
Lexus authorized repairer, or any reli-
able repairer.
Write the characters to be entered.
Select the candidate character that
corresponds to the entered hand
written character.*
Select the candidate character that
is displayed to enter the next
desired character.
 Depending on the input screen and
conditions, the following operations
can be performed.
• Back space: Draw a straight line from
the bottom right to the bottom left.
• Space: Draw a line from the top left to
the bottom left and then continue to the
bottom right at a right angle.
• Line Break: Draw a line from the top
right to the bottom right and then con-
tinue to the bottom left at a right angle.
*: These functions are not available in
some languages.
●To deselect the handwriting input range, press the touchpad of the Remote Touch
or sub function button.
The list screen may be displayed after
entering characters. When a list is dis-
played, use the appropriate screen
button to scroll through the list.
Hand writing method
List screen
A
B
C

40
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
included with the Bluetooth® phone
or portable device for more details.
7 Register the Bluetooth® device
using your Bluetooth® device.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth® devices. Depending on
the type of Bluetooth® device being
connected, a message confirming
registration may be displayed on the
Bluetooth® device’s screen.
Respond and operate the
Bluetooth® device according to the
confirmation message.
8 Check that the following screen is
displayed, indicating pairing was
successful.
 The system is connecting to the reg-
istered device.
 At this stage, the Bluetooth® func-
tions are not yet available.
9 Check that “Connected” is dis-
played and registration is complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
●If a cellular phone does not operate prop-
erly after being connected, turn the cellu- lar phone off and on and then connect it again.
■Registering from phone
When registering from the navigation
system is failed, or the phone name
doesn’t appear on the registering
screen, you need to connect the
Bluetooth® phone manually.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Yes” to register the new
phone.
5 Press the button on the Remote
Touch to select “If you cannot find…”
on the bottom of the screen.

41
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
6Select “Register from phone”.
7 Register the Bluetooth® device
using your Bluetooth® device.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth® devices. Depending on
the type of Bluetooth® device being
connected, a message confirming
registration may be displayed on the
Bluetooth® device’s screen.
Respond and operate the
Bluetooth® device according to the
confirmation message.
8 Check that the following screen is
displayed, indicating pairing was
successful.
 The system is connecting to the reg-
istered device.
 At this stage, the Bluetooth® func-
tions are not yet available.
9 Check that “Connected” is dis-
played and registration is complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
●If a cellular phone does not operate prop-
erly after being connected, turn the cellu- lar phone off and on and then connect it again.
To use the Bluetooth® Audio, it is nec-
essary to register an audio player with
the system.
Once the player has been registered, it
is possible to use the Bluetooth®
Audio.
This operation cannot be performed
while driving.
For details about registering a
Bluetooth® device: P.44
1 Turn the Bluetooth® connection
setting of your audio player on.
 This function is not available when
the Bluetooth® connection setting
of your audio player is set to off.
Registering a Bluetooth® audio
player for th e first time

43
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
• This is a profile to allow remote control
the A/V equipment.
●If your cellular phone does not support
HFP, registering the Bluetooth® phone or using OPP, PBAP, MAP or PAN pro-files individually will not be possible.
●If the connected Bluetooth® device ver-sion is older than recommended or
incompatible, the Bluetooth® device function may not work properly.
●Certification
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc. and any use of such marks by
Panasonic Corporation is under license.
Other trademarks and trade names are
those of their respective owners.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select the desired item to be set.
Connecting a Bluetooth® device
( P.45)
Registering a Bluetooth® device
Setting Bluetooth® details
Displaying the Bluetooth® setup
screen
Bluetooth® setup screen
A
B

80
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
2Select the country flag icon.
3 Enter a desired country name.
4 Select the desired country when
displayed the candidate country
name.
If the result is a contact, street address,
favourite or recent destination, the cor-
responding details screen is shown.
All details screens have “Go” button
which starts route calculation and
shows the route calculation screen.
• If a destination has already been set,
“Replace”, “Add” and “Cancel” will
be displayed.
“Replace”: Select to delete the existing
destination(s) and set a new one.
“Add”: Select to add a destination.
“Cancel”: Select to return to the current
destination.
1 Select the desired .
2 Check that the detailed POI infor-
mation is displayed.
■If the result is a contact, favourite,
recent destination or POI
Select to display the Street View.
Select to call the phone number.
• If no Bluetooth® phone is available, this
button is greyed out.
Select to register the entry in the
favourites list.
Select to display the starting route
guidance screen. ( P.90)
Viewing detail screen
A
B
C
D