buttons lexus LC500 2018 Navigation Manual

9
-$@-$I@/BWJ@0.&@ &&

*2:LC500h
To use this system in the safest possible
manner, follow all the safety tips shown
below.
This system is intended to assist in
reaching the destination and, if used
properly, can do so. The driver is solely
responsible for the safe operation of
your vehicle and the safety of your pas-
sengers.
Do not use any feature of this system to
the extent it becomes a distraction and
prevents safe driving. The first priority
while driving should always be the safe
operation of the vehicle. While driving,
be sure to observe all traffic regula-
tions.
Prior to the actual use of this system,
learn how to use it and become thor-
oughly familiar with it. Read the entire
manual to make sure you understand
the system. Do not allow other people
to use this system until they have read
and understood the instructions in this
manual.
For your safety, some functions may
become inoperable when driving.
Unavailable screen buttons are
dimmed.
While driving, listen to the voice
instructions as much as possible and
glance at the screen briefly and only
when it is safe. However, do not totally
rely on voice guidance. Use it just for
reference. If the system cannot deter-
mine the current position correctly,
there is a possibility of incorrect, late,
or non-voice guidance.
The data in the system may occasion-
ally be incomplete. Road conditions,
including driving restrictions (no left
turns, street closures, etc.) frequently
change. Therefore, before following
any instructions from the system, look
to see whether the instruction can be
done safely and legally.
This system cannot warn about such
things as the safety of an area, condi-
tion of streets, and availability of emer-
gency services. If unsure about the
safety of an area, do not drive into it.
Under no circumstances is this system
a substitute for the driver’s personal
judgement.
Use this system only in locations where
it is legal to do so. Some areas may
have laws prohibiting the use of naviga-
tion screens next to the driver.
Safety instruction
WARNING
●Exercise extreme caution if operating the system while driving. Insufficient
attention to the road, traffic or weather conditions may cause an accident.
●While driving, be sure to obey the traf-fic regulations and maintain awareness
of the road conditions. If a traffic sign on the road has been changed, route guidance may not have the updated
information such as the direction of a one way street.

28
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
2-1.Basic information before operation
After a few seconds, the “CAUTION”
screen will be displayed.
Waiting about 5 seconds or selecting
“Continue” switches to the last dis-
played screen.
When system response is extremely
slow, the system can be restarted.
1 Press and hold the “PWR•VOL”
knob for 3 seconds or more.
1 Use the touchpad of the Remote
Touch to select the desired button
on the screen.
2 The buttons on the screen can be
selected by either depressing or
double tapping on the touchpad.
Once a button has been selected,
the screen will change.
 When the pointer moves close to a
button, it will automatically snap to
Initial screen
When the engine switch switch> is turned to ACCESSORY
or IGNITION ON mode mode>, the initial screen will be dis-
played and the system will begin
operating.
Caution screen
WARNING
●When the vehicle is stopped with the engine running operating>, always apply the parking brake for safety.
Restarting the system
How to use the Remote
Touch
This system can be operated by the
Remote Touch when the engine
switch is in ACCES-
SORY or IGNITION ON mode
.
Touchpad operation

33
2
-$@-$I@/BWJ@0.&@ &&

2-1. Basic information before operation
Basic function
To change the screen displayed on the
side display, use the screen buttons on
the right side of the display.
1 Select the desired button.
Select to display the navigation
screen. ( P.33)
Select to display the audio control
screen. ( P.34)
Select to display the vehicle infor-
mation screen.*
Select to display the air condition-
ing control screen.*
Select to hide/show the side dis-
play.
*: Refer to the “OWNER’S MANUAL”
1 Use pinch to zoom when the cursor
is on a button in the map screen.
1 Select , or .
1 Select or to change the
map mode.
 For details about the map mode,
refer to “Switching the map mode”.
( P.72)
Using side display
Switching the side display
A
B
C
D
E
Navigation system
Map scale
Orientation of the map
Switching the map mode

64
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
3-1.Basic operation
Destination menu screen is displayed by following operation:
 Press the “MAP” button on the Remote Touch
 Press the “MENU” button on the Remote Touch and then select “Destination”
on the menu screen.
 Select on the map screen.
A short while later after the above methods, the display automatically switches to
normal map screen.
Select to search for a destination by contact, favourite, recent destination,
street address, and POI. ( P.79)
Select to set a destination from favourites. The top 4 favourite destinations
(home, work, and 2 favourites) are disp layed as quick access buttons. Any
favourite in the list can be used to start route guidance directly. ( P.83)
Select to search for a destination from a list of the last destinations. ( P.83)
Select to display the other search me thod (Address, POI, phonebook of con-
nected Bluetooth® device and geo-coodinates).
Quick reference
Destination menu screen
A
B
C
D

81
3
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
Navigation system
■If the result is a street address
Select to display the Street View.
Select to enter the house number.
Select to enter the intersection.
Select to register the entry in the
favourites list.
Select to display the starting route
guidance screen. ( P.90)
4 favourite destinations (home, work,
and any 2 favourites) are displayed as
quick access buttons and directly start
the route guidance when selected.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Select desired quick access desti-
nations.
 To use this function, it is necessary to
register destinations. ( P.101)
 Automatic navigation is available for
the 4 favourite destinations. When
the favourite has an address
assigned, is turned on. ( P.81)
The feature automatically proposes
guidances to the registered destination
when you start the vehicle during the
registered day/time slot.
Registered a day/time slot
1 Select “OK” to start route guid-
ance.
 If “Cancel” is selected, last active
screen will display.
Searching from quick access
destinations
A
B
C
D
E
Automatic navigation for com-
muting
When the destination is not set

83
3
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
Navigation system
essary to register day/time slots for the
destinations.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Select of the desired destina-
tion.
4 Enter the desired day and time
information for the commutes.
 Select “Auto-navigation” to set the
automatic navigation on/off.
 Select the on/off to toggle auto-nav-
igation setting on/off for specific
days.
 Select “Copy time from...” to copy a
defined time slot from one day to all
other days.
Search for a destination and route from
favourites list stored in the system.To
use this function, it is necessary to reg-
ister the entry. ( P.101)
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Select the desired entry.
 Select to display and edit the
entry information. ( P.103)
●4 top favourites (home, work, and 2 other favourites) are displayed as quick access buttons on navigation menu screen.
●Transferred POIs and routes from an external device or the server will be
stored in this list. ( P.102, 103)
●Transferred routes are marked by the
specific icon.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Recent”.
Searching from favourites list
Searching from last destinations

85
3
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
Navigation system
6Select “Town” or “Code” to enter
the town name or postal code.
7 Select “No.” or “Intersection” to
enter a house number or intersec-
tion name.
 It is not possible to enter a house
number and intersection at the
same time.
8 Select “Calculate”.
●If a unique street name is entered (only 1
in the country), then “Calculate” can also be selected. If “Calculate” is selected when only “Town” or “Code” has been
entered, a route search starts with the centre of the town entered as the destina-
tion.
●When is selected, entered data other
than “Country” will be deleted.
Search for a destination from POI
database in the system.
When the system is connected to the
internet, a web search is available.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Other”.
3 Select “POI”.
4 Enter the POI name and select
“Search”.
Select to change the searching
area. ( P.86)
Select to narrow down the POI cat-
egory. ( P.87)
Select to display the list of previous
search word. ( P.87)
5 Check that the search results are
displayed. Select the desired POI.
Select to display a full list view. The
distance to the POIs can be
checked.
 When button on the Remote
Touch is pressed, the search method
buttons are displayed.
POIs can be searched using web
search.
• For detailed setting about online search:
 P.229
Searching by POIs
A
B
C
A

88
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
button is greyed out.
Select to display the starting route
guidance screen. ( P.90)
3 Select .
■Pictures
Selecting the Pictures button displays
up to 6 pictures as thumbnails in the
screen. Selecting a thumbnail will
enlarge the picture.
1 Select .
2 Select the desired thumbnail.
 The previous/next buttons are only
shown if there is more than one pic-
ture available. If a picture can’t be
shown as enlarged, a message
“Images are not available.” will be
displayed.
Before using this function, it is neces-
sary to connect a Bluetooth® phone.
If a contact does not have address
information stored, the entry will be
dimmed.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Other”.
3 Select “Phonebook”.
4 Select the desired entry.
 Select to display the details
screen. ( P.80)
Geo coordinates can be entered in
DMS format (Degrees°, Minutes’, Sec-
onds”) and Decimal. Only coordinate
values that can potentially exist are
able to be entered. Impossible coordi-
nate values and their relevant screen
buttons will be dimmed.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Other”.
3 Select “Geo coordinates”.
4 Select “Degrees” or “Decimal”.
5 Enter the latitude and longitude.
6 Select “OK”.
Searching by phonebook
C
Searching by coordinates

101
3
-$@-$I@/BWJ@0.&@ &&

3-4. Favourite destinations
Navigation system
3-4.Favourite destinations
1Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Check that the favourites list is dis-
played.
 The 4 top favourites (home, work,
and any 2 favourites) are displayed
as quick access buttons.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
3 Select “Add new...” box.
4 Select the desired method to
search the desired location.
5 Enter the entry name and then
select “OK”.
6 Check that the entry is registered in
the favourites list.
4 favourite destinations (home, work,
and any 2 favourites) are displayed as
quick access buttons and directly start
the route guidance. Automatic naviga-
tion is available to the 4 favourite desti-
nations.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Favourites”.
Registering an entry
Favourite points and routes on the
map can be registered in the favou-
rites list. Up to 200 entries can be
registered.
Displaying favourites list
Creating a new entry
Registering a quick access desti-
nations

120
-$@-$I@/BWJ@0.&@ &&

4-1. Basic operation
4-1.Basic operation
The audio control screen can be
reached by the following methods:
Using the audio control switch
1 Press the “RADIO” or “MEDIA”
button.
Using the Remote Touch
1 Press the “MENU” button on the
Remote Touch, then select “Radio”
or “Media”.
The audio functions can also be displayed and operated on the side display. ( P.33)
■Control screen
■Audio control switch
•Using the radio ( P.126)
• Playing an audio CD or
MP3/WMA/AAC disc ( P.130)
• Playing a DVD ( P.132)
• Playing a USB memory ( P.135)
• Playing an iPod ( P.137)
• Playing a Bluetooth® device
( P.139)
• Using the Miracast™ ( P.142)
•Using the AUX port ( P.144)
• Using the steering wheel audio
switches ( P.146)
• Audio system settings ( P.148)
●The position and shapes of the buttons may differ slightly between right-hand
drive vehicles and left-hand drive vehi- cles.
Quick reference
Functional overview