remote control LEXUS LX570 2014 User Guide

481-2. Opening, closing and locking the doors
LX570_OM_OM60L21U_(U) Wireless remote control The wireless remote control can be us ed to lock and unlock the vehicle
from outside the vehicle.
Locks all doors
Unlocks all doors Pressing the button unlocks the
driver’s door. Pressing the but-
ton again within 3 seconds
unlocks the other doors.
Opens the windows and
moon roof (press and hold)
*Opens/closes the back door
(press and hold)
Sounds alarm (press and
hold) (  P. 121)
* : This setting must be customized
at your Lexus dealer.

491-2. Opening, closing and locking the doors
1
Before driving
LX570_OM_OM60L21U_(U) ■
Operation signals ●
Doors: A buzzer sounds and the emergency flashers flash to indicate that the
doors have been locked/unlocked. (Locked: Once; Unlocked: Twice)●
Windows and moon roof: A buzzer sounds to indicate that the windows and
moon roof are opening.■
Operating conditions
The wireless remote control will not operate when the “ENGINE START STOP”
switch is in any position other than OFF. ■
Door lock buzzer
If a door is not fully closed, a buzzer soun ds continuously for 5 seconds if an attempt
to lock the door is made. Fully close the do or to stop the buzzer, and lock the vehi-
cle once more. ■
Power back door operation
The power back door can be opened while the vehicle is locked. (one motion) ■
Alarm
Using the wireless remote control to lock the door will set the alarm system. ■
Electronic key battery depletion
 P. 4 1■
Security feature
 P. 4 3■
If the wireless remote control does not operate properly ●
Locking and unlocking the doors: Use the mechanical key. (  P. 8 6 7 )●
Starting the engine:  P. 8 6 8■
When the electronic key battery is fully depleted
 P. 7 8 0■
Conditions affecting operation
 P. 3 9■
Customization
Settings (e.g. unlocking function) can be changed.
(Customizable features  P. 9 0 6 )

501-2. Opening, closing and locking the doors
LX570_OM_OM60L21U_(U) ■
Certification for wireless remote control
For vehicles sold in the U.S.A.
FCC ID: HYQ14AEM
FCC ID: HYQ14ABB
FCC ID: HYQ13BZS
FCC ID: HYQ14ABK
*FCC ID: HYQ14ABS
*FCC ID: HYQ13CZA
*
* : For U.S. mainland only
NOTE:
This device complies with part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
For vehicles sold in Canada
NOTE:
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must a ccept any interference, including interfer-
ence that may cause undesired operation of the device.

5111-2. Opening, closing and locking the doors
Before driving
LX570_OM_OM60L21U_(U) Side doors The vehicle can be locked and unlocked using the entry function, wireless
remote control or door lock switch.
■ Entry function
 P. 3 6
■ Wireless remote control
 P. 4 8
■ Door lock switch
Locks all doors
Unlocks all doors
■ Inside lock button
Locks the door
Unlocks the door The front doors can be opened
by pulling the inside handles
even if the lock buttons are in
the lock position.

561-2. Opening, closing and locking the doors
LX570_OM_OM60L21U_(U) Back door The back door can be locked/unlocked and opened by the following proce-
dures.
■ Locking and unlocking the back door
Door lock switch
 P. 5 1
Entry function
 P. 3 6
Wireless remote control
 P. 4 8
■ Opening the back door from outside the vehicle
Unlocks the back door
Raise the back door
Pull the handleSTEP 1
STEP 2

571-2. Opening, closing and locking the doors
1
Before driving
LX570_OM_OM60L21U_(U) Power back door switch
Pressing the switch closes upper
back door automatically. (A
buzzer sounds) Pressing the switch while the upper
back door is closing opens it again.
Canceling the power back door system
Turn the main switch to disable the
power back door system.
Inoperative
Operative The back door cannot be operated
even with the wireless remote con-
trol or power back door switch.■ Opening the back door from inside the vehicle
The power back door can be
opened/closed using the power
back door switch or wireless
remote control. (  P. 4 8 )Push and hold the switch to
close or open. (A buzzer
sounds.)

841-3. Adjustable components (s eats, mirrors, steering wheel)
LX570_OM_OM60L21U_(U) Linking driving position memory with door unlock operation
Record your driving position to butto n “1”, “2” or “3” before performing
the following:
Using the wireless remote control
Turn the “ENGINE START STOP” switch to OFF after closing the
driver’s door.
While pressing the desired button
(“1”, “2” or “3”), press on
the wireless remote control until
the signal beeps. The driving position is recalled
when the driver’s door is unlocked
using the entry function or wireless
remote control and the driver’s
door is opened.
To prevent unintended triggering of the alarm, open and close a door once after
a driving position has been recorded. (If a door is not opened within 60 seconds
after is pressed, the doors will be locked again and the alarm will auto-
matically be set.)
In case that the alarm is triggere d, immediately stop the alarm. (  P. 1 1 9 )STEP 1
STEP 2

851-3. Adjustable components (s eats, mirrors, steering wheel)
1
Before driving
LX570_OM_OM60L21U_(U) Using the door lock switch
Carry only the key (including the ca rd key) to which you want to link
the driving position. If 2 or more keys are in the vehicle, the driving
position cannot be linked properly.
Turn the “ENGINE START STOP” switch to OFF after closing the
driver’s door.
While pressing the desired button
(“1”, “2” or “3”), press the lock or
unlock side on the door lock
switch (either the driver or passen-
ger side) until the signal beeps. The driving position is recalled
when the driver’s door is unlocked
using the enter function or wireless
remote control and the driver’s
door is opened.STEP 1
STEP 2
■
Canceling the linked do or unlock operation
Turn the “ENGINE START STOP” switch to OFF after closing the driver’s
door.
Using the wireless remote control: While pressing “SET” button, press
button on the wireless remote control until the signal beeps.
Using the door lock switch: While pressing “SET” button, press the lock or
unlock side on the door lock switch until the signal beeps.STEP 1
STEP 2

1071
Before driving
LX570_OM_OM60L21U_(U) 1-4. Opening and closing th e windows and moon roof
Power windows
Lock switch
Press the switch down to lock pas-
senger window switches. Use this switch to prevent children
from accidentally opening or clos-
ing a passenger window.The power windows can be opened and closed using the following
switches.
Closing
One-touch closing
*Opening
One-touch opening
*
*: To s t o p t h e w i n d o w p a r t w a y ,
operate the switch in the oppo-
site direction.
■
The power windows can be operated when
The “ENGINE START STOP” switch is in IGNITION ON mode. ■
Door lock linked window operation
The following functions can be used if customized at your Lexus dealer. ●
The power windows can be opened and closed using the mechanical key.
(  P. 8 6 7 )●
The power windows can be opened using the wireless remote control.
(  P. 4 8 )●
The power windows can be closed using the entry function. (  P. 3 6 )

1111-4. Opening and closing the windows and moon roof
1
Before driving
LX570_OM_OM60L21U_(U) ■
The moon roof can be operated when
The “ENGINE START STOP” switch is in IGNITION ON mode. ■
Door lock linked moon roof operation
The following functions can be used if customized at your Lexus dealer. ●
The moon roof can be opened and closed using the mechanical key. (  P. 8 6 7 )●
The moon roof can be opened using the wireless remote control. (  P. 4 8 )●
The moon roof can be closed using the entry function. (  P. 3 6 )■
Operating the moon roof after turning the “ENGINE START STOP” switch OFF
The moon roof can be operated for ap proximately 45 seconds even after the
“ENGINE START STOP” switch is turned to ACCESSORY mode or turned OFF. It
cannot, however, be operated once either front door is opened.■
Jam protection function
If an object is detected between the moon roof and the frame while closing or tilting
down, travel is stopped and the moon roof opens slightly. ■
If the moon roof cannot be closed automatically
Keep the switch depressed. ■
To reduce moon roof wind noise
When the moon roof is opened automatically, it will stop slightly before the fully
open position. Driving with the moon roof in this position can help reduce wind
noise. ■
Sunshade
The sunshade can be opened and closed manually. However, the sunshade will
open automatically when the moon roof is opened.