homelink LEXUS LX570 2016 Owners Manual

446
LX570_OM_OM60N01U_(U) 5-6. Using the other interior features
Garage door opener The garage door opener (HomeLink ®
Universal Transceiver) is manufactured under
license from HomeLink ®
.
The HomeLink ®
compatible transceiver in your vehicle has 3 buttons which can
be programmed to operate 3 different devices. Refer to the programming
method below appropriate for the device.
Buttons
Indicator
■
Programming HomeLink ®
Point the remote control transmit-
ter for the device 1 to 3 in. (25 to
75 mm) from the HomeLink ®
buttons. Keep the HomeLink ®
indicator light
in view while programming.The garage door opener can be programmed to operate garage doors, gates,
entry doors, door locks, home lighting systems, security systems, and other
devices.
Programming HomeLink ®
(for U.S.A. owners)1
2
1

LX570_OM_OM60N01U_(U) 4475-6. Using the other interior features
5
Interior features Press and hold one of the
HomeLink ®
buttons and the
transmitter button. When the
HomeLink ®
indicator light
changes from a slow to a rapid
flash, you can release both but-
tons. If the HomeLink ®
indicator light
comes on but does not flash, flashes
rapidly for 2 seconds and remains lit,
the HomeLink ®
button is already
programmed. Use the other buttons
or follow the “Reprogramming a
HomeLink ®
button” instructions.
(  P. 4 4 9 )
Te s t t h e H o m e L i n k ®
operation by
pressing the newly programmed
button. If a HomeLink ®
button has been
programmed for a garage door,
check to see if the garage door
opens and closes. If the garage door
does not operate, see if your remote
control transmitter is of the rolling
code type. Press and hold the pro-
grammed HomeLink ®
button. The
remote control transmitter is of the
rolling code type if the HomeLink ®
indicator light flashes rapidly for 2
seconds and then remains lit. If your
transmitter is of the rolling code type,
proceed to the heading “Program-
ming a rolling code system”.
Repeat the steps above to program another device for each of the remain-
ing HomeLink ®
buttons. 2
3
4

448
LX570_OM_OM60N01U_(U) 5-6. Using the other interior features■
Programming a rolling code system
If your device is rolling code equipp ed, follow the steps under the heading
“Programming HomeLink ®
” before proceeding with the steps listed below.
Locate the learn button on the ceiling mounted garage door opener motor.
The exact location and color of the bu tton may vary by brand of garage
door opener motor. Refer to the operation manual supplied wi th the garage door opener motor for the
location of the learn button.
Press the learn button. Following this step, you have 30 second s in which to initiate step 3 below.
Press and hold the vehicle’s programmed HomeLink ®
button for 2 sec-
onds and release it. Repeat this step once again. The garage door may
open. If the garage door opens, the programming process is complete. If the door does
not open, press and release the button a third time. This third press and release will
complete the programming process by opening the garage door.
The ceiling mounted garage door opener motor should now recognize the
HomeLink ®
signal and operate the garage door.
Repeat the steps above to program an other rolling code system for any of
the remaining HomeLink ®
buttons.■
Programming an entry gate (for U.S.A. owners)/Programming all devices in
the Canadian market
Place your transmitter 1 to 3 in. (25 to 75 mm) away from the surface of the
HomeLink ®
.Keep the HomeLink ®
indicator light in view while programming.
Press and hold the selected HomeLink ®
button.
Repeatedly press and release (cycle) th e device’s remote control button for
two seconds each until step 4 is completed.
When the indicator light on the HomeLink ®
compatible transceiver starts
to flash rapidly, release the buttons.
Test the operation of the HomeLink ®
by pressing the newly programmed
button. Check to see if the gate/device operates correctly.
Repeat the steps above to program another device for each of the remain-
ing HomeLink ®
buttons. 1
2
3
4
1
2
3
4
5
6

LX570_OM_OM60N01U_(U) 4495-6. Using the other interior features
5
Interior features ■
Programming other devices
To program other devices such as home security systems, home door locks or
lighting, contact your Lexu s dealer for assistance.■
Reprogramming a button
The individual HomeLink ®
buttons cannot be erased but can be repro-
grammed. To reprogram a button, fo llow the “Reprogramming a HomeLink ®
button” instructions.
Press the appropriate HomeLink ®
button. The HomeLink ®
indicator light
should come on. The HomeLink ®
compatible transceiver in your vehi cle continues to send a signal for
up to 20 seconds as long as the button is pressed.
Press and hold the desired HomeLink ®
button. After 20 seconds, the
HomeLink ®
indicator light will start flashing slowly. Next, while still pressing and
holding the HomeLink ®
button, press and hold the button on the transmitter
until the HomeLink ®
indicator light changes from a slow to a rapid flash.
Press and hold the 2 outside buttons for
10 seconds until the indicator light
flashes. If you sell your vehicle, be sure to erase
the programs stored in the HomeLink ®
memory.Operating HomeLink ®
Reprogramming a HomeLink ®
button
Erasing the entire HomeLink ®
memory (all three programs)

450
LX570_OM_OM60N01U_(U) 5-6. Using the other interior features■
Before programming ●
Install a new battery in the remote control transmitter. ●
The battery side of the remote control transmitter must be pointed away from the
HomeLink ®

button.■
Certification for the garage door opener 
For vehicles sold in the U.S.A., Ha waii, Guam, Saipan and Puerto Rico
For vehicles sold in Canada
■
When support is necessary
Visit on the web at www.homelink.com
or call 1-800-355-3515.
WA R N I N G ■
When programming a garage door or other remote control devices
The garage door on other de vices may operate, so ensure people and objects are out
of danger to prevent potential harm. ■
Conforming to federal safety standards
Do not use the HomeLink ®
compatible transceiver with any garage door opener or
device that lacks safety stop and reverse fe atures as required by federal safety stan-
dards.
This includes any garage door that canno t detect an interfer ing object. A door or
device without these features increases the risk of death or serious injury.