buttons LEXUS RX330 2006 User Guide


AUDIO
263
1Radio mode:Scan tuning
(See page 271 for details.)
CD mode: Scan selection
(See page 279 for details.)
2Ejecting a CD
(See page 277 for details.)
3CD slot
(See page 277 for details.)
4Display of functions in TAPE or CD mode
RAND: Random access
(See page 280 for details.)
RPT: Automatic repeat
(See page 276 or 280 for details.)
:DOLBY NR
(See page 275 for details.)
: Side change
(See page 275 for details.)
 : Rewinding or reversing
(See page 275 or 279 for details.)
 : Fast forwarding
(See page 275 or 279 for details.)
5Station selector and function buttons
(See page 270 for details.)
6MUTE button
(See page 265 for details.)
7Traffic announcement
(See page 273 for details.)
8Program type
(See page 272 for details.)
9TUNE/AUDIO CONTROL knob
(See page 267 for details.)
10Radio mode: Radio text message
(See page 273 for details.)
CD mode: CD text
(See page 281 for details.)
11Mode selectors
(See page 265 for details.)
12Cassette tape slot
(See page 274 for details.)
13Stopping and ejecting a cassette tape
(See page 274 for details.)
14Turning the system on and adjusting the volume
(See page 264 for details.)
15Radio mode:Seek tuning
(See page 271 for details.)
TAPE mode: Direct access to a desired program
(See page 276 for details.)
CD mode: Direct access to a desired track
(See page 279 for details.)

AUDIO
265
Push the “MUTE” button to decrease the volume
momentarily.
To return to its original volume, push the same button again.
When the audio system is turned on, the mute is always off
regardless of the previous mode.Push the “AM”, “FM”, “TAPE” or “DISC” button to turn on
that mode. The selected mode turns on directly.
Push these buttons if you want to switch from one mode to
another.
If the tape or CD is not set, the cassette player or CD player
does not turn on.
You can turn off each player by ejecting the cassette tape or
CD. If the audio system was previously off, then the entire
audio system will be turned off when you eject the cassette
tape or CD. If the other function was previously playing, it will
come on again.

AUDIO
269
(e) Your CD player
When you insert a
CD, gently push it in with the label face up.
(The player will automatically eject a CD if the label face is
down.) The CD player will play from track 1 through the end
of the CD. Then it will play from track 1 again. On models with
the CD auto changer, next CD will be played from track 1.
NOTICE
Never try to disassemble or oil any part of the CD player.
Do not insert anything other than CD into the slot.
The player is intended for use with 12 cm (4.7 in.) CDs only.
Radio operation
(a) Listening to the radio
Push these buttons to choose either an AM or FM station.
“AM”, “FM1”, “FM2” or “FM TYPE” appears on the d\
isplay.

AUDIO
270
Turn this knob to the right to step up the frequency or to
the left to step down.
Your radio automatically changes to stereo reception when a
stereo broadcast is received. “ST” appears on the display. If
the signal becomes weak, the radio reduces the amount of
channel separation to prevent the weak signal from creating
noise. If the signal becomes extremely weak, the radio
switches from stereo to mono reception. In this case, “ST”
disappears from the display.(b) Presetting a station
1. Tune in the desired station.
2. Push one of the station selector buttons (1 — 6) and
hold it until a beep is heard. This sets the station to the
button and the button number (1 — 6) appears on the
display.
Each
button can store one AM station and two FM stations. To
change the preset station to a different one, follow the same
procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse.


AUDIO
283
1Radio mode:Scan tuning
(See page 291 for details.)
CD mode: Scan selection
(See page 300 for details.)
2Stopping and ejecting a CD
(See page 297 for details.)
3CD slot
(See page 297 for details.)
4Display of functions in TAPE or CD mode
RAND: Random access
(See page 302 for details.)
RPT: Automatic repeat
(See page 295 or 301 for details.)
:DOLBY NR
(See page 294 for details.)
:CD selection
(See page 299 for details.)
: Side change
(See page 295 for details.)
 : Rewinding or reversing
(See page 295 or 301 for details.)
 : Fast forwarding
(See page 295 or 301 for details.)
5Station selector and function buttons
(See page 290 for details.)
6CD load button
(See page 297 for details.)
7Traffic announcement
(See page 292 for details.)
8Program type
(See page 291 for details.)
9TUNE/AUDIO CONTROL knob
(See page 286 for details.)
10Radio mode: Radio text message
(See page 293 for details.)
CD mode: CD text
(See page 303 for details.)
11Mode selectors
(See page 285 for details.)
12Cassette tape slot
(See page 294 for details.)
13Stopping and ejecting a cassette tape
(See page 294 for details.)
14Turning the system on and adjusting the volume
(See page 284 for details.)
15Radio mode:Seek tuning
(See page 290 for details.)
TAPE mode: Direct access to a desired program
(See page 296 for details.)
CD mode: Direct access to a desired track
(See page 301 for details.)

AUDIO
285
Push the “AM”, “FM”, “TAPE” or “DISC” button to turn on
that mode. The selected mode turns on directly.
Push these buttons if you want to switch from one mode to
another.
If the tape or CD is not set, the cassette player or CD player
does not turn on.
You can turn off each player by ejecting the cassette tape or
CD. If the audio system was previously off, then the entire
audio system will be turned off when you eject the cassette
tape or CD. If the other function was previously playing, it will
come on again. With rear seat entertainment system —
You can play a DVD or CD by pushing the “DISC” button when
a disc is loaded in the DVD player. Each time you push the
“DISC” button, you change between “CD” mode on the front
audio system and the DVD player. When you play the DVD
player, “AUX” appears on the display.

AUDIO
289
Radio operation
(a) Listening to the radio
Push these buttons to choose either an AM or FM station.
“AM”, “FM1”, “FM2” or “FM TYPE” appears on the d\
isplay.
Turn this knob to the right to step up the frequency or to
the left to step down.
Your radio automatically changes to stereo reception when a
stereo broadcast is received. “ST” appears on the display. If
the signal becomes weak, the radio reduces the amount of
channel separation to prevent the weak signal from creating
noise. If the signal becomes extremely weak, the radio
switches from stereo to mono reception. In this case, “ST”
disappears from the display.

AUDIO
290(b) Presetting a station
1. Tune in the desired station.
2. Push one of the station selector buttons (1 — 6) and
hold it until a beep is heard. This sets the station to the
button and the button number (1 — 6) appears on the
display.
Each
button can store one AM station and two FM stations. To
change the preset station to a different one, follow the same
procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse. (c) Selecting a station
Tune in the desired station using one of the following methods.
Seek tuning: Push the “SEEK” button. The radio will begin
seeking up
or down for a station of the nearest frequency and
will stop on reception. Each time you push the button, the
stations will be searched automatically one after another.
Preset tuning: Push the button (1 — 6) for the station you
want. The button number (1 — 6) and station frequency
appear on the display.
Manual tuning: Turn the “TUNE” knob. The radio will step up
or down to another frequency.

AUDIO
315
Buttons on the DVD player unit
The rear seat entertainment system can be operate with the
switches on the DVD player.
1“” (eject) switch: Use this switch to eject the disc
from the DVD player.
2“SOURCE” switch: Push this switch to turn on the rear
seat entertainment system.
To change the audio mode, turn on the system and push the
source switch until the mode you desire is displayed. If a tape
or disc is not inserted, the “TAPE”, “CD” and “DVD” modes are
skipped.
3“TUNE/TRACK” switch: Use this switch to tune or seek
(radio mode), fast forward or rewind (“TAPE” mode),
select a desired track (“CD” mode) or select a desired
chapter/track (“DVD” mode).
Radio mode: Use this switch to tune or seek.
 To tune, repeatedly push this switch briefly until your desired
station is found.
 To seek, push and hold this switch until you hear a beep.
The radio will begin seeking up or down the band for a
station, and will stop on reception.
TAPE mode: Use this switch to fast forward or rewind a tape,
or for automatic program selection.
 To skip forward or rewind using automatic program
selection, push this switch briefly. By using automatic
program selection, you can skip up to 9 programs at a time.
For details, see page 276 or 296.
 To fast forward or rewind the tape, push and hold this switch
until you hear a beep. To stop fast forwarding or rewinding,
push and hold the same side of the switch until you hear a
beep.

AUDIO
319

1Remote control buttons (with navigation system)
2Remote control buttons (without navigation
system)
3DVD player unit
To turn on the system, push the “SOURCE” button.
The screen indicates which mode can be selected. Push the
“DVD” or “VIDEO” button when the connected DVD player or
your personal audio machine is on. The rear seat
entertainment system will be turned on.
The rear seat entertainment system can select all the modes.
When a cassette tape, a CD, a DVD video disc, an audio CD,
a video CD, a CD text, a dts−CD or a DVD audio disc is not
loaded on the front audio system or the DVD player, only the
radio mode can be selected on the rear seat entertainment
system.
To turn off the system, push the “OFF” button.
When the front audio system is turned off, the rear audio
system and the DVD player will be turned off simultaneously.