remote start LEXUS RX350 2011 User Guide

428
3-7. Other interior features
nProgramming a Rolling Code system (for U.S.A. owners)
If your device is Rolling Code equipped, follow the steps under the
heading “Programming the HomeLink®” before proceeding with the
steps listed below.
Locate the learn button on the ceiling mounted garage door
opener motor. The exact location and color of the button may
vary by brand of garage door opener motor.
Refer to the operation manual supplied with the garage door opener
for the location of the learn button.
Press the learn button.
Following this step, you have 30 seconds in which to initiate step 3
below.
Press and hold the vehicle’s programmed HomeLink® button for
2 seconds and release it. Repeat this step once again. The garage
door may open.
If the garage door opens, the programming process is complete. If the
door does not open, press and release the button a third time. This third
press and release will complete the programming process by opening
the garage door.
The ceiling mounted garage door opener motor should now recognize
the HomeLink® signal and operate the garage door.
Repeat the steps above to program another rolling code system
for any of the remaining HomeLink® buttons.
nProgramming an entry gate (for U.S.A. owners)/Programming all
devices in the Canadian market
Place your transmitter 1 to 3 in. (25 to 75 mm) away from the sur-
face of the HomeLink®.
Keep the HomeLink® indicator light in view while programming.
Press and hold the selected HomeLink® button.
Repeatedly press and release (cycle) the device’s remote control
button for two seconds each until step 4 is completed.
When the indicator light on the HomeLink® compatible trans-
ceiver starts to flash rapidly, release the buttons.
STEP1
STEP2
STEP3
STEP4
STEP1
STEP2
STEP3
STEP4

497
4-3. Do-it-yourself maintenance
4

Maintenance and care
nUse a CR1632 lithium battery
lBatteries can be purchased at your Lexus dealer, local electrical appliance
shops or camera stores.
lReplace only with the same or equivalent type recommended by the manufac-
turer.
lDispose of used batteries according to the local laws.
nIf the electronic key battery is discharged
The following symptoms may occur:
lThe smart access system with push-button start and wireless remote control will
not function properly.
lThe operational range is reduced.
nWhen the card key battery needs to be replaced (if equipped)
The battery for the card key is available only at Lexus dealers. Your Lexus dealer
can replace the battery for you.
CAUTION
nRemoved battery and other parts
Keep away from children. These parts are small and if swallowed by a child, they can
cause choking. Failure to do so could result in death or serious injury.
NOTICE
nFor normal operation after replacing the battery
Observe the following precautions to prevent accidents:
lAlways work with dry hands.
Moisture may cause the battery to rust.
lDo not touch or move any other components inside the remote control.
lDo not bend either of the battery terminals.

5

When trouble arises
581
5-2. Steps to take in an emergency
If the electronic key does not operate properly
Locking and unlocking the doors and key linked functions
Use the mechanical key (→P. 2 7 )
in order to perform the following
operations (driver’s door only):
Locks all the doors
Closes the windows and moon
roof (turn and hold)
Unlocks the door
Turning the key rearward unlocks
the driver's door. Turning the key
once again unlocks the other
doors.
Opens the windows and moon
roof (turn and hold)
If communication between the electronic key and vehicle is interrupted
(→P. 36) or the electronic key cannot be used because the battery is
depleted, the smart access system with push-button start and wireless
remote control cannot be used. In such cases, the doors can be opened or
the engine can be started by following the procedure below.

624
6-2. Customization
Door lock
(→P. 4 7 ,
581)
Shifting gears to
P unlocks all
doors
OnOffO—OO
Opening
driver's door
unlocks all doors
OffOnO—OO
Smart
access sys-
tem with
push-button
start and
wireless
remote con-
trol
(→P. 3 1 , 4 3 )
Operation sig-
nal (buzzer)7OffO—OO1 to 6
Operation signal
(emergency
flashers)
OnOffO—OO
Ti m e e l a p s e d
before the auto-
matic door lock
function is acti-
vated if a door is
not opened after
being unlocked
60 sec-
onds
Off
O—OO
30 sec-
onds
120 sec-
onds
Smart
access sys-
tem with
push-button
start
(→P. 3 1 )
Smart door
unlocking
Driver’s
door
All the
doorsO—OO
Smart access
system with
push-button
start
OnOffO—OO
ItemFunctionDefault
setting
Custom-
ized
setting

OTHER BENEFITS AND ASSISTANCE
training, equipment, quality and cus-
tomer satisfaction. These repair cen-
ters use Genuine Lexus Parts exclu-
sively in the repair of Lexus vehicles.
The Smart Key
Your Lexus vehicle was made with
two “Smart Keys” and an aluminum
key-number plate. Each Smart Key
includes an electronic main key that
has an integrated mechanical back-up
key. The electronic key controls the
remote-entry and theft-deterrent sys-
tems, enables the push-button start
switch and controls the engine immo-
bilizer. The mechanical key can be
removed from the electronic key and
used to operate the driver’s door lock,
the glove box lock and the trunk lock
(if equipped).
Replacing the Key
Your Lexus dealer can generate
replacement keys. Certain bonded/
registered locksmiths may also be
able to generate replacement keys.
When ordering a new key, bring all
keys for the vehicle to your dealer-
ship. If a Smart Key or the key-num-
ber plate is not available, a Lexus
dealer or certain locksmiths can
obtain the key code from a restricted-
access database. These businesses
can also access a service utility to
register the keys to the vehicle if all
registered keys have been lost.
If you lock your key in your vehicle
and do not have a spare, your dealer
can make a new mechanical key from
the code on the key-number plate.
Certain bonded/registered lock-
smiths may also be able to generate
a replacement mechanical key. If a
Lexus dealer is not available, please
refer to www.aloa.orgto find a bond-
ed/registered locksmith who per-
forms high-security key service.
Keeping the Key Safe
Replacing a Smart Key may be costly.
We advise you to keep a spare Smart
Key and the key-number plate in a
safe place. If you record the key num-
ber in more than one place, do not
record it in a way that can be easily
identified and associated with the
vehicle. For example, don’t leave the
number somewhere that can be
accessed by a valet. It is wise to keep
a copy of the key number outside of
the vehicle.
Other Benefits and Assistance8
AMENITIES
฀8฀9฀5฀7฀7฀_฀2฀0฀1฀1฀฀฀R฀X฀฀฀3฀5฀0฀_฀1฀-฀8฀c฀_฀R฀1฀.฀q฀x฀d฀฀฀฀฀8฀/฀6฀/฀1฀0฀฀฀฀฀6฀:฀3฀8฀฀฀P฀M฀฀฀฀฀P฀a฀g฀e฀฀฀8