display LEXUS RX400H 2008 Workshop Manual

253
3-3. Using the rear audio system
3
Interior features
RX400h_U
Changing the initial setting
Changing the audio languageSelect “Audio Language”.
Select the language you want to
hear, and press ENT to input it.
Select “Others” if you cannot find
the language you want to hear.
Enter the appropriate 4-digit lan-
guage code. Select a number, and
press ENT to input it.
Language code list (→P. 2 5 7 )
If a code that is not in the list is
entered, Incorrect Code will
appear on the screen.
Press or select to
display the initial setting screen.
The following initialization can
be changed here.
Audio language
Subtitle language
DVD language
Angle mark
Parental lock

256
3-3. Using the rear audio system
RX400h_U
Setting viewer restriction levelsSetting a password allows the
viewer restriction to be effective.
Select “Parental Lock”.
Enter the password and press ENT.
The setting cannot be changed
unless the password is entered.
When you forget the password, ini-
tialize the password. (→P. 2 5 7 )
Select a restriction level (1-8), and
press ENT. The smaller the level
number, the stricter the age limit.
Setting the display mode
Pressing changes the dis-
play modes sequentially as follows:
Normal→Wide 1 → Wide 2

257
3-3. Using the rear audio system
3
Interior features
RX400h_U
■Returning to the previous screen
Select , and press ENT.
■To initialize the password
Press on the remote control or unit ten times when the screen to enter the per-
sonal code is displayed.
■Language code list
CodeLanguage
1001Japanese
0514English
0618French
0405German
0920Italian
0519Spanish
2608Chinese
1412Dutch
1620Portuguese
1922Swedish
1821Russian
1115Korean
0512Greek
0101Afar
0102Abkhazian
0106Afrikaans
0113Amharic
0118Arabic
0119Assamese
0125Ay m ara
0126Azerbaijani
0201Bashkir
0205Byelorussian
0207Bulgarian
0208Bihari
0209Bislama
0214Bengali
0215Ti b e t a n
0218Breton
0301Catalan
0315Corsican
0319Czech
0325We l s h
0401Danish
0426Bhutani
0515Esperanto
0520Estonian
0521Basque
0601Pe r s i a n
0609Finnish
0610Fiji
0615Fa roe se
0625Frisian
0701Irish
0704Scots-Gaelic
0712Galician
CodeLanguage

274
3-6. Other interior features
RX400h_U
Clock
■The clock is displayed when
The engine switch is in the ACC or ON position.
With navigation system
Owners of models equipped with a navigation system should refer to
the “Navigation System Owner's Manual”.
Without navigation system Adjusts the hour.
Adjusts the minutes.
Rounds to the nearest hour.
*
*: e.g. 1:00 to 1:29 → 1:00
1:30 to 1:59 → 2:00

275
3-6. Other interior features
3
Interior features
RX400h_U
Outside temperature display
■If the temperature does not appear or it shows
Have the vehicle inspected by your Lexus dealer.
With navigation system
Owners of models equipped with a navigation system should refer to
the “Navigation System Owner's Manual”.
Without navigation system Displays the outside air tem-
perature
The temperature range that can
be displayed is from -22°F
(-30°C) to 122°F (50°C).

276
3-6. Other interior features
RX400h_U
Multi-display light control
With navigation system
Owners of models equipped with a navigation system should refer to
the “Navigation System Owner's Manual”.
Without navigation system Adjusts the brightness of the
light
Push and release the button until
the desired brightness is
obtained.

292
3-6. Other interior features
RX400h_U
Compass
The compass on the inside rear view mirror indicates the direction in which
the vehicle is heading.
■Operation
To turn the compass on or off,
press the switch.
■ Displays and directions
DisplayDirection
NNorth
NENortheast
EEast
SESoutheast
SSouth
SWSouthwest
WWe s t
NWNorthwest

293
3-6. Other interior features
3
Interior features
RX400h_U
Calibrating the compassThe direction display deviates from the true direction determined by the
earth’s magnetic field. The amount of deviation varies according to the
geographic position of the vehicle.
If you cross over a map boundary shown in illustration, the compass will devi-
ate.
To obtain higher precision or perfect calibration, refer to the following.
■ Deviation calibration
Stop the vehicle where it is safe to drive in a circle.
Press and hold the switch for 6
seconds.
A number (1 to 15) appears on the
compass display.
Press the switch, and referring to the map above, select the num-
ber of the zone where you are.
If the direction is displayed several seconds after adjustment, the cali-
bration is complete.
STEP1
STEP2
STEP3

294
3-6. Other interior features
RX400h_U■
Circling calibration
If C appears on the display, drive
the vehicle at 5 mph (8 km/h) or
less in a circle until a direction is
displayed.
If there is not enough space to
drive in a circle, drive around the
block until the direction is dis-
played.
■Conditions unfavorable to correct operation
The compass may not show the correct direction in the following conditions:
●The vehicle is stopped immediately after turning.
●The vehicle is on an inclined surface.
●The vehicle is in a place where the earth's magnetic field is subject to interference
by artificial magnetic fields (underground car park/parking lot, under a steel
tower, between buildings, roof car park/parking lot, near an intersection, near a
large vehicle, etc.).
●The vehicle has become magnetized.
(There is a magnet or metal object near the inside rear view mirror.)
●The battery has been disconnected.
●A door is open.

295
3-6. Other interior features
3
Interior features
RX400h_U
CAUTION
■While driving the vehicle
Do not adjust the display. Be sure to adjust the display only when the vehicle is
stopped.
■When doing the circling calibration
Be sure to secure a wide space, and watch out for people and vehicles in the neigh-
borhood. Do not violate any local traffic rules while performing circling calibration.
NOTICE
■To avoid the compass malfunctions
Do not place magnets or any metal objects near the inside rear view mirror.
Doing this may cause a malfunction of the compass sensor.
■To ensure normal operation of the compass
●Do not perform circling calibration of the compass in a place where the earth's
magnetic field is subject to interference by artificial magnetic fields.
●During calibration, do not operate electric systems (moon roof, power windows,
etc.) as they may interfere with the calibration.