trailer LINCOLN NAVIGATOR 2014 Quick Reference Guide

6 7*if equipped
2014 NAVIGATOR
Overdrive Control with Tow/Haul Feature

The tow/haul feature improves transmission operation when towing a trailer or a heav y load. To
activate tow/haul, press the button on the side of the gearshif t lever. The TOW HAUL indicator light
will illuminate in the instrument cluster. To deactivate, press the button again. Drive with the vehicle
in D (Overdrive) with tow/haul off for the best fuel economy. Refer to the Transmission chapter of
your Owner’s Manual for more information.
Control Trac® Four-Wheel-Drive (4WD) System *
4X2 (2WD):
Delivers power to the rear wheels only. This is appropriate for normal, on-road driving
on dr y pavement.
4X4 AUTO: Provides electronic control four-wheel drive with power delivered to all four wheels, as required, for increased traction.
The information display will show “ 4X4 AUTO” when this position is selected. This mode is appropriate for all on-road driving conditions,
such as dr y road sur faces, wet pavement, snow or gravel.
4X4: Provides electronically locked four-wheel drive power to all four wheels. The information display will show “ 4X4” when you select
this mode. 4x4 mode is not recommended for use on dr y pavement. It is only intended for severe winter or off-road conditions, such as
deep snow, ice or shallow sand. Refer to the Using Four-Wheel Drive (4WD) chapter in your Owner’s Manual for more information
including shifting instructions.
AdvanceTrac® with RSC® (Roll Stability ControlTM)
Helps you keep control of your vehicle when on a slipper y sur face. The electronic stabilit y control por tion of the system helps avoid skids
and lateral slides, and roll stabilit y control helps avoid a vehicle rollover. The traction control system helps avoid drive wheel spin and loss
of traction. Refer to the Stability Control chapter in your Owner’s Manual for safety information and more details.
Trailer Sway Control*
This feature applies your vehicle brakes at individual wheels and, if necessar y, reduces engine power. If the trailer begins to sway, the
stabilit y control light flashes. The first thing to do is slow your vehicle down, then pull safely to the side of the road and check for proper
tongue load and trailer load distribution. See the Load Carrying chapter in your Owner's Manual for specific loading information.
Vehicle Stability