off MAZDA CX90 2024 Owners Manual

How to Use the DoorCourtesy Lights
The light turns on when any door is
opened and turns off when closed.
How to Use the Luggage
Compartment Lights
Open the liftgate.
The luggage compartment lights turn
on.
When the liftgate is closed, the luggage
compartment lights turn off.
Other Equipment
Interior Lights
7-44
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the AmbientLights
When the vehicle power is switched
ON, the ambient lights remain on.
The ambient lights turn on/off in
conjunction with the Illuminated Entry
System in the cabin and parking lights
turned on.
NOTE
The light turns on/off depending on
the illumination entry system when
the vehicle power is switched OFF.
The intensity of the ambient lights
can be changed when the parking
lights are turned on.
For the method of changing the
setting , refer to the Mazda Connect
owner’s manual.
Other Equipment
Interior Lights
7-45
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Accessory Sockets
The accessory socket is used as a
socket for accessories when the vehicle
power is switched to ACC or ON.
Only use accessories that have a
maximum power consumption of 120
W (DC12V-10A) or below.
Warnings and CautionsWhen Using the
Accessory Socket
CAUTION
 Always close the cover when it is not
in use. If foreign matter or liquid
penetrates the socket, it may cause a
problem.
 Insert the accessory plug into the
socket securely. If the plug is not
inserted securely, it may heat
excessively and blow the fuse.
 Do not use accessories that have a
power consumption of over 120 W
(DC12V-10A). Otherwise, it could
cause a malfunction.
 Noise may occur on the audio
playback depending on the device
connected to the accessory socket.
 Do not insert the cigarette lighter
into the accessory socket.
 Depending on the device connected
to the accessory socket, the vehicle's
electrical system might be affected,
which could cause the warning light
to turn on. Disconnect the
connected device and make sure
that the problem is resolved. If the
problem is resolved, switch the
vehicle power OFF after the device is
disconnected from the socket. If the
problem is not resolved, consult an
Authorized Mazda Dealer.
Other Equipment
Accessory Sockets
7-46
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Do not use the AC power outlet if it
is damaged. If part replacement or
repair is required, consult an
Authorized Mazda Dealer.
 Do not charge the vehicle from the
AC power outlet.
Do not use electrical appliances that
emit steam with the windows closed.
Otherwise, steam could negatively
affect the vehicle’s electrical
accessories.
Close the hood while using the AC
power outlet.
When using the AC power outlet, the
cooling fan in the engine compartment
could operate automatically resulting
in an accident.
CAUTION
 Always close the cover when it is not
in use. If foreign matter or liquid
penetrates the AC power outlet, it
may cause a problem.
 Insert electrical appliance plugs into
the AC power outlet securely. If the
plug is not inserted securely, it may
heat excessively and blow a fuse.
 Do not connect multiple electrical
appliances to the AC power outlet.
Otherwise, it could cause smoking or
combustion.
 Do not use electrical appliances that
exceed the prescribed power
capacity. Otherwise, it could cause a
malfunction.
 Do not refuel while the AC Power
Outlet is in use.
 Do not use heat appliances such as a
stove in the cabin. Otherwise, the
interior parts may melt or burn due
to heat.
How to Use the AC
Power Outlet (120 V/ 1,500 W)
Before using the electrical appliance,
always follow the precautions
indicated in the instruction manual for
the electrical appliance to be used.
Connecting
1. Press the power switch 2 timeswithout depressing the brake pedal.
2.
The indicator light flashes and turns
on when it is ready to be used.
NOTE
If the indicator light turns off after
flashing , there may be a problem
with the system. Contact an
Authorized Mazda Dealer.
3.
Open the lid and connect the
electrical appliance to be used.
Disconnecting
Press the switch again to turn off the
indicator light. Then disconnect the
electrical appliance.
Other Equipment
Accessory Sockets
7-51
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Wireless Charger (Qi)
You can charge mobile devices such as
Smartphones which comply with the
Qi Wireless Charging standard.
Only use mobile devices that have a
maximum power consumption of 5 W,
or 15 W or below.
Trademarks
“Qi” and the Qi symbol are trademarks
or registered trademarks of the
Wireless Power Consortium (WPC).
Warnings and Cautions
When Using the Wireless Charger (Qi)
WARNING
Radio waves from the Wireless
Charger (Qi) may affect the operation
of medical devices such as
implanted-type cardiac pacemakers
or defibrillators.
 Before using the Wireless Charger
(Qi) near people who use medical
devices, ask the medical device
manufacturer or your physician if
radio waves from the Wireless
Charger (Qi) will affect the device.
 The Wireless Charger (Qi) can be
disabled to prevent it from affecting
medical devices. Consult an
Authorized Mazda Dealer for details.
Heed the following cautions.
Otherwise, the Wireless Charger (Qi)
may malfunction or be damaged,
which could cause a fire, burns due to
heat generation, or an accident such
as electrical shock.
 Do not install, remove, disassemble,
or change the wiring of the Wireless
Charger (Qi). If the Wireless Charger
(Qi) needs to be installed or
removed, consult an Authorized
Mazda Dealer.
 Do not use the Wireless Charger (Qi)
when it is malfunctioning. In
addition, if smoke, abnormal noise,
or abnormal smell is emitted from
the Wireless Charger (Qi), stop the
vehicle in a safe place, turn off the
Wireless Charger (Qi), and consult
an Authorized Mazda Dealer.
Other Equipment
Wireless Charger (Qi)
7-54
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

When using the Wireless Charger
(Qi) to store items on, turn off the
Wireless Charger (Qi).
 Do not place any metal object
between the charging area and the
mobile device. Also, do not apply
items such as a metallic sticker to the
Wireless Charger (Qi).
 When charging, do not place any
item other than the mobile device to
be charged on the Wireless Charger
(Qi). In addition, do not place any
metal object, IC card, coin, or
magnetic item near the charging
area.
 Remove dust or dirt from the
charging area before use.
 Do not apply strong force or impact
to the Wireless Charger (Qi) or get it
wet.
 Use only mobile devices which
support the Wireless Charger (Qi).
CAUTION
While a mobile device is placed on
the charging area, keep the vehicle
key away from the Wireless Charger
(Qi). The vehicle key may not be
detected due to radio wave
interference by the Wireless Charger
(Qi).
 Charging may not operate normally
under the following conditions:
 The mobile device is fully charged.
 There is foreign matter between
the mobile device and the charging
area.
 The temperature of the mobile
device is high.
 The mobile device is placed with
the charging side facing upward.
 The mobile device is placed in a
position extremely deviating from
the center of the charging area.
Your vehicle is in an area where
strong radio waves or electrical
noise occur such as near a
television tower, power plant, or
airport.
 The Near Field Communication
(NFC) function setting of the
mobile device is on (depends on
the model of the mobile device).
 Keep the following items away from
the charging area. Otherwise the
data stored on the mobile device
could be erased or the device could
malfunction.
 Magnetic items such as magnets,
magnetic cards, and magnetic
recording media.
 High precision devices such as
wristwatches.
 Before using the Wireless Charger
(Qi), make sure to back up the data
stored on the mobile device. The
data on the mobile device could be
deleted.
 Do not wipe the Wireless Charger
(Qi) using oil, alcohol, or thinner, or
spray hairspray or insecticide onto it.
Otherwise, it could cause damage or
cracking.
 Do not leave mobile devices in the
cabin. The temperature inside the
cabin may become very hot, causing
the devices to malfunction.
Other Equipment
Wireless Charger (Qi)
7-55
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the WirelessCharger (Qi)
1. Start the hybrid system.The power for the Wireless Charger
(Qi) turns on and the LED indicator
turns on.
2. Place a device compliant with the
Qi Wireless Charging standard
(portable device with a maximum
power consumption of 5 W or 15
W or below) in the center of the
charging area on the tray.
1. Charging area
2. LED indicator
The LED indicator turns on in amber
or green when charging starts.
Charging starts when all the doors
and liftgate are closed.
For details on the LED indicator, refer
to the following LED indicator table.
Charging status display
The charging status of the Wireless
Charger (Qi) can be checked with the
LED indicator or the icon displayed on
the center display.
Illumina-
tion/flash pattern Icon indi-
cation Status
Does not turn on ―Indicates that charg-
ing is turned
off.
Tu r n s o n i n white
Indicates that charg-
ing is possible.
Tu r n s o n i n amber
Indicates normal
charging.
Tu r n s o n i n green
Indicates fast charg-
ing*1.
Flashes in white
Indicates that the
charging conditions
are not met.
Flashes in red
Indicates that charg-
ing is not possible
because a high tem-
perature is detected.
Indicates that charg-
ing is not possible
because foreign mat-
ter is detected.
Tu r n s o n i n red
Indicates that there
is a problem with
Wireless Charger
(Qi) and it needs to
be repaired. Consult
an Authorized Maz-
da Dealer.
*1 Some mobile devices can switchbetween normal charging and fast
charging.
Other Equipment
Wireless Charger (Qi)
7-56
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

NOTE
Charging efficiency may be reduced
or charging may not be possible
depending on the use environment
and conditions.
Depending on the mobile device
case or accessories used, the mobile
device may not charge, or the
charging efficiency may be reduced
resulting in a longer charging time. If
charging does not start even when a
mobile device is placed on the
charging area, remove the case or
accessory.
Depending on the vehicle condition,
charge amount may be temporarily
restricted and charging may be
canceled, however, this does not
indicate a problem.
If the mobile device temperature
rises during charging, charging may
stop due to the protection function
of the device. If that happens, wait
until the mobile device cools down
sufficiently and then recharge it.
When using the Wireless Charger
(Qi), applications using the Near
Field Communicatio
n (NFC) function
may launch, however, this does not
indicate a problem with the Wireless
Charger (Qi).
While i-stop is operating, charge
amount may be temporarily
restricted and charging may be
temporarily canceled, however, this
does not indicate a problem.
Charging may be temporarily
canceled depending on the vehicle
conditions, such as when the engine
is stopped.
Convenient Ways to Use
the Wireless Charger (Qi)
The Wireless Charger (Qi) can be
turned on/off and the connection
mode can be switched.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
Other Equipment
Wireless Charger (Qi)
7-57
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Warnings and CautionsWhen Using the Assist Grips
WARNING
Never hang heavy or sharp objects on
the assist grips and coat hooks.
Hanging heavy or sharp-ended objects
such as a coat hanger from the assist
grips or coat hooks is dangerous as
they can fly off and hit an occupant in
the cabin if a curtain air bag was to
deploy, which could result in serious
injury or death.
Do not use the assist grips when
getting in and out of the vehicle or
getting out of a seat.
An assist grip could break under a
heavy load resulting in injury.
How to Use the Assist
Grips
Use the assist grips to support your
body while seated in the vehicle and
while the vehicle is moving.
Other Equipment
Assist Grip
7-58
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

To w i n g
Your Mazda was designed and built
primarily to carry passengers and
cargo.
If you tow a trailer, follow these
instructions because driver and
passenger safety depends on proper
equipment and safe driving habits.
Towing a trailer will affect handling,
braking , durability, performance, and
economy.
Never overload vehicle or trailer.
Consult an Authorized Mazda Dealer if
you need further details.
NOTE
Your vehicle is equipped with a
Trailer Stability Control (TSC)
mechanism, which enhances vehicle
stability when towing a trailer.
Refer to Trailer Stability Control
(TSC) on page 5-90.
When towing a trailer, do not use the
following safety systems (If a Mazda
genuine trailer hitch is used, these
systems are automatically turned off
when the trailer's electrical
connector is connected):
Blind Spot Monitoring (BSM)Rear Cross Traffic Alert (RCTA)Smart Brake Support (SBS) reverse
drive detection
Parking Sensor System (Rear)Emergency Lane Keeping (ELK)
Blind Spot Assist
Emergency Lane Keeping (ELK)
Head-on traffic avoidance assist
Turn off the aforementioned safety
systems when towing a trailer
without a genuine Mazda trailer
hitch.
Your vehicle is equipped with a
Mazda intelligent Drive Select
(Mi-Drive) towing mode which
enhances vehicle stability when
towing a trailer.
Refer to Mazda intelligent Drive
Select (Mi-Drive) on page 5-96.
Other Equipment
Towing (U.S.A. and Canada)
7-59
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04