lock MAZDA CX90 2024 User Guide

How to Use the DrivingPo s i t i on M e m o r y
A driving position can be programmed
to the position memory switch and the
key.
Programming
1. Switch the vehicle power ON.
2. Adjust the following driving positions to the desired positions.
Driver's seatActive driving displayOutside mirrorsSteering wheel (Power type)
3. Continue pressing the SET switch until a sound is activated.
4. Do the following operation within 5seconds after the sound is activated
to program the driving position.
Programming to a position
memory button
Press the button you want to
program, either 1 or 2 button.
Programming to the transmitter
Press the unlock button on the
transmitter.
A sound is activated when the
operation is completed correctly.
Adjusting to the Programmed Driving
Po s i t io n
Operation Using the Position Memory
Switch
Press either switch 1 or 2 that you
programmed to activate the seat
adjustment to your position.
A sound is activated when the
adjustment to the programmed driving
position is completed.
Operation Using the Key
1. Unlock the driver's door using one of the following methods.
Touch the sensing area of the
door release touch sensor.
Press the key unlock button.
2. If the driver's door is opened within a certain period of time after
unlocking, adjustment of the next
driving position starts.
Driver's seatActive driving displayOutside mirrorsSteering wheel (Power type)
A sound is activated when the
adjustment to the programmed
driving position is completed.
Equipment to Protect Occupants/Pedestrians
Front Seats
3-33
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Deleting a Programmed Position
Erasing the Position Stored in the
Position Memory Switch
Program a new driving position.
Deleting a Position Programmed to
the Key
1. Switch the vehicle power OFF.
2. Continue pressing the SET switchuntil a sound is activated.
3. Press the key lock button within 5 seconds after the sound is
activated.
NOTE
If the angle of the outer mirror is
adjusted close to the limits of its
range of motion, the angle of the
outer mirrors may not be
programmed correctly.
When the adjustment to the
programmed driving position has
been completed, a sound is not
activated.
Under the following conditions, the
driving position adjustment is
canceled.
The seat adjustment switch/SET
switch/steering wheel (power
type)/outer mirrors/active driving
display for the driver's seat is
operated to adjust the position.
The key lock button or unlock
button is operated.
The vehicle moves.The selector lever is shifted to a
position other than P.
Equipment to Protect Occupants/Pedestrians
Front Seats
3-34
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

The seatback folds forward and the seat slide lock is released.
3. Slide the seat forward.
CAUTION
Do not operate the lever on the side of a second-row seat while the seatback is
folded down and the seat is slid forward. If the lever is forcefully operated, it
could damage the lever.
4. After getting in or out, raise the seatback until it locks.
5. Slide the seat rearward and lock the seat.
CAUTION
After entering/exiting the third-row seat area, return the second-row seatback to
its upright position and lock it after sliding it rearward.
Make sure it is locked by attempting to lightly move it back and forth.
Otherwise, it could move unexpectedly and cause injury.
Operating the Switch
1. Lower the head restraint to the lowest position.
2. Press the switch when all of the following conditions are met.
The selector lever is in the P position.The door is open on the side where the switch is to be operated.
Equipment to Protect Occupants/Pedestrians
Second-row Seat
3-38
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

The seatback folds forward and the seat slide lock is released.
3. Slide the seat forward.
4. After getting in or out, raise the seatback until it locks.
5. Slide the seat rearward and lock the seat.
CAUTION
After entering/exiting the third-row seat area, return the second-row seatback to its
upright position and lock it after sliding it rearward.
Make sure it is locked by attempting to lightly move it back and forth.
Otherwise, it could move unexpectedly and cause injury.
Split folding the Second-row Seats
WARNING
Make sure the adjustable components of a second-row seat are locked after
folding down the seatback.
A second-row seat that is not securely locked is dangerous. In a sudden stop or
collision, the second-row seat could move, causing injury.
After folding down the seatback of a second-row seat, make sure the adjustable
components of the seat are locked in place by attempting to slide the seat forward
and backward.
Do not drive the vehicle with an occupant on a folded down seatback or in the
luggage compartment.
During sudden braking or a collision, the pe rson could be seriously injured or killed.
Tightly secure cargo in the luggage compar tment when it is transported with the
seatbacks folded down.
Driving without tightly securing cargo and lu ggage is dangerous as it could move and
become an obstruction to driving during emergency braking or a collision resulting
in an unexpected accident.
Equipment to Protect Occupants/Pedestrians
Second-row Seat
3-39
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

CAUTION
When folding the seatback forward, always support the seatback with your hand.
If it is not supported by a hand, fingers or the hand raising the lever could be
injured.
 Check the position of a front seat before folding a second-row seatback.
Depending on the position of a front se at, it may not be possible to fold a
second-row seatback all the way down because it may hit the seatback of the front
seat which could scratch or damage the front seat or its pocket. Remove the head
restraint on the second-row outboard seat if necessary.
NOTE
The seats cannot be flattened down while the second-row seats are unlocked even if
the lever on the side of the head restraint is operated and the reclining lever is
operated. Before folding down the second-r ow seats, move the seatback forward
once, slide the seat rearward, and lock the seat.
1. Lower the head restraint to the lowest position.
2. Pull up the lever on the side of the second-row seat and fold the seatback.
Equipment to Protect Occupants/Pedestrians
Second-row Seat
3-40
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Raising the Second-row Seatbacks
WARNING
When returning a seatback to its upright position, make sure the 3-point seat belt
is not caught in the seatback and the 3-point seat belt is not twisted.
If the seat belt is used while it is twisted and caught in the seatback, the seat belt
cannot function at its full capacity, which could cause serious injury or death.
1. Press the seatback rearward and lock it in place.
Armrest
CAUTION
Be careful not to apply excessive force to the armrest such as by sitting on it.
Otherwise, it could be deformed or damaged.
Equipment to Protect Occupants/Pedestrians
Second-row Seat
3-41
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

The seatback folds forward and the seat slide lock is released.
NOTE
The seats cannot be flattened down while the second-row seats are unlocked
even if the lever on the side of the head restraint is operated and the reclining
lever is operated. Before folding down the second-row seats, move the seatback
forward once, slide the seat rearward, and lock the seat.
3. Slide the seat forward.
4. After getting in or out, raise the seatback until it locks.
5. Slide the seat rearward and lock the seat.
CAUTION
After entering/exiting the third-row seat ar ea, return the second-row seatback to its
upright position and lock it after sliding it rearward.
Make sure it is locked by attempting to lightly move it back and forth.
Otherwise, it could move unexpectedly and cause injury.
Split folding the Second-row Seats
WARNING
Make sure the adjustable components of a second-row seat are locked after
folding down the seatback.
A second-row seat that is not securely locked is dangerous. In a sudden stop or
collision, the second-row seat could move, causing injury.
After folding down the seatback of a second-row seat, make sure the adjustable
components of the seat are locked in place by attempting to slide the seat forward
and backward.
Do not drive the vehicle with an occupant on a folded down seatback or in the
luggage compartment.
During sudden braking or a collision, the pe rson could be seriously injured or killed.
Equipment to Protect Occupants/Pedestrians
Second-row Seat
3-43
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Tightly secure cargo in the luggage compartment when it is transported with the
seatbacks folded down.
Driving without tightly securing cargo and luggage is dangerous as it could move and
become an obstruction to driving during emergency braking or a collision resulting
in an unexpected accident.
CAUTION
 When folding the seatback forward, always support the seatback with your hand.
If it is not supported by a hand, fingers or the hand raising the lever could be
injured.
 Check the position of a front seat before folding a second-row seatback.
Depending on the position of a front se at, it may not be possible to fold a
second-row seatback all the way down because it may hit the seatback of the front
seat which could scratch or damage the front seat or its pocket. Remove the head
restraint on the second-row outboard seat if necessary.
NOTE
The seats cannot be flattened down while the second-row seats are unlocked even if
the lever on the side of the head restraint is operated and the reclining lever is
operated. Before folding down the second-r ow seats, move the seatback forward
once, slide the seat rearward, and lock the seat.
1. Lower the head restraint to the lowest position.
2. If the armrests are down, fold them back up.
3. Pull up the lever on the side of the second-row seat and fold the seatback.
Equipment to Protect Occupants/Pedestrians
Second-row Seat
3-44
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Raising the Second-row Seatbacks
1. Press the seatback rearward and lock it in place.
Armrest
CAUTION
Be careful not to apply excessive force to the armrest such as by sitting on it.
Otherwise, it could be deformed or damaged.
Adjusting the angle
The angle of the armrest can be adjusted according to the angle of the seatback.
To adjust the angle, lower the armrest to the lowest position, pull it up to the
desired position, and then lock it. To adjust the angle again, store the armrest once
and then lower the armrest to the lowest position again.
After adjustment, make sure that the armrest is securely locked by lightly pressing it
down.
Equipment to Protect Occupants/Pedestrians
Second-row Seat
3-45
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use theThird-row Seat
Third-row Seat Access
Slide the second-row seat forward to
get in and out of the third-row seat
area.
Refer to How to Use the Second-row
Seat (6:4 Split Adjustable-type Bench
Seat Type) on page 3-37.
Refer to How to Use the Second-row
Seat (Captain Seat Type) on page 3-42.
Split folding the Third-row Seats
CAUTION
Do not apply load to the head restraint
with it in the upright position and the
seatback folded down. Otherwise, it
could cause damage to the head
restraint.
1. (Three-seater type)
If the center head restraint is in the
position for use, store it.
2. Secure the third-row seat seat belts into their holders.
3. Slide the second-row seat all the way forward.
4. Pull the strap to fold down the head restraint.
5. Pull the strap further to fold thethird-row seat forward.
To return third-row seat to its original
position
1. Raise the seatback.
2. Press the seatback rearward andlock it in place.
Make sure the seatback is secured
by attempting to lightly move it
forward and back.
3. Raise the head restraint until it locks.
Equipment to Protect Occupants/Pedestrians
Third-row Seat
3-46
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04