Auto start MAZDA CX90 2024 Owner's Manual

NOTE
If the hybrid system is stopped while
the seat warmer is operating in manual
mode, the seat warmer does not turn
on automatically the next time the
hybrid system is started. To turn the
seat warmer on, press the switch
again.
In addition, the second-row seat
warmer operation stops automatically
after the seat warmers have operated
for a certain period of time.Convenient Ways to Usethe Seat Warmer
The seat temperature for front seat can
be automatically controlled (auto
mode) at 4 levels (High, Mid, Low,
OFF) according to the conditions in the
cabin.
The seat warmer can be operated in
conjunction with auto mode for the
climate control system.
1. Turn on the “Occupant Comfort”Refer to Mazda Connect Owner's
Manual or consult an Authorized
Mazda Dealer.
2. Press the AUTO switch for the climate control system.
NOTE
If the front passenger’s seat belt is
unfastened, the front passenger’s
seat warmer turns off.
If any of the following switch
operations is performed during auto
mode or the auto operation of the
climate control system is canceled,
the seat warmer switches from auto
mode to manual mode.
Seat warmer switch is pressedSeat ventilation switch is pressed
When the seat warmer switch/seat
ventilation switch is pressed, only the
seat on the side where the switch
was pressed switches to manual
mode.
To return to auto operation, press
the AUTO switch for the climate
control system.
While operating in auto mode, the
(with heated steering wheel)/
(without heated steering wheel)
is displayed.
Equipment to Make Cabin More Comfortable
Seat Warmer
6-24
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use HeatedSteering Wheel
Using the Heated Steering Wheel
1. Start the hybrid system.
2.
1. Heating area
The indicator light in the heated
steering wheel switch turns on.
NOTE
The heated steering wheel operates for
a certain period of time and then stops
automatically.
Turning Off the Heated Steering
Wheel
Press the heated steering wheel switch.
The heated steering wheel stops and
the indicator light in the switch turns
off.
Convenient Ways to Use
Heated Steering Wheel
The steering warmer can be
automatically (auto mode) turned
on/off depending on the conditions in
the cabin.
The steering warmer can be operated
in conjunction with auto mode for the
climate control system.
1. Turn on the “Occupant Comfort” Refer to Mazda Connect Owner's
Manual or consult an Authorized
Mazda Dealer.
2. Press the AUTO switch for the
climate control system.
NOTE
If the heated steering wheel switch is
pressed during auto mode or the
auto operation of the climate control
system is canceled, the heated
steering wheel switches from auto
mode to manual mode.
To return to auto operation, press
the AUTO switch for the climate
control system.
If the vehicle power is switched OFF
while the heated steering wheel is
operating in auto mode, the heated
steering wheel operates in auto
mode again the next time the vehicle
power is switched ON.
Equipment to Make Cabin More Comfortable
Heated Steering Wheel
6-26
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the SeatVentilation
1. Start the hybrid system.
2.Front
1. OFF
2. High
3. Mid
4. Low
Second-row seat
*
1. OFF
2. High
3. Mid
4. Low
While the seat ventilation is
operating, the indicator light in the
seat ventilation switch turns on
according to the set mode.
NOTE
If the hybrid system is stopped while
the seat ventilation is operating in
manual mode, the seat ventilation
does not turn on automatically the
next time the hybrid system is started.
To turn the seat ventilation on, press
the switch again.
Equipment to Make Cabin More Comfortable
Seat Ventilation
6-28*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

8What to Do in Case of Emergency
In Case of Emergency................ 8-4Dealing With an Accident....... 8-4
When Towing is Required...........8-5 Having the Vehicle Towed...... 8-5
Using the Towing Hooks......... 8-6
Key Does Not Operate............... 8-8 Canceling the Key Temporary
Suspension Function.............. 8-8
Unlocking Using the Auxiliary
Key....................................... 8-8
Starting the Hybrid System with a
Dead Key Battery................... 8-9
Engine Does Not Start.............. 8-11 Taking Action with Depleted
Lead-acid Battery................. 8-11
Starting a Flooded Engine..... 8-15
Charging Is Not Possible.......... 8-16 Dealing with the Cause........ 8-16
Hybrid System Cannot be
Stopped................................. 8-17 Forcibly Stopping the Hybrid
System................................ 8-17
Problem With the Brake System (Foot
Brake)....................................8-18 Applying the Emergency
Brake.................................. 8-18AUTOHOLD Cannot be
Canceled............................... 8-19Forcibly Canceling the
AUTOHOLD........................ 8-19
Overheating........................... 8-20 Ta k i n g A c t i o n w i t h
Overheating........................ 8-20
Tire is Punctured or Bursts........ 8-22 Changing a Flat Tire (With Spare
Tire).................................... 8-22
Liftgate Cannot Open.............. 8-30 Open the liftgate from the
luggage compartment.......... 8-30
The Power Windows Cannot Be
Operated............................... 8-31 Initializing the Power
Window.............................. 8-31
The Panorama Sunroof Cannot Be
Operated............................... 8-32 Initializing the Panorama
Sunroof............................... 8-32
The Moonroof Cannot Be
Operated............................... 8-33 Initializing the Moonroof...... 8-33
8-1
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Brake Override WarningSound
A warning sound is activated when the
accelerator pedal and brake pedal are
depressed at the same time while
driving. Only depress the brake pedal.
Electric Parking Brake
(EPB) Warning Sound
The warning sound is activated under
the following conditions:
The vehicle is driven with the parking
brake applied.
The Electric Parking Brake (EPB)
switch is pulled while the vehicle is
driven.
You attempt to start driving the
vehicle while the conditions for
releasing the Electric Parking Brake
(EPB) automatically have not been
met.
Check the condition of the parking
brake.
What to Do in Case of Emergency
Warning Sound is Activated
8-60
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Inspecting Engine Oil
CAUTION
Do not overfill the engine oil. This may
cause engine damage.

Use center display screen indication to
inspect the engine oil level.
1. Make sure the hood is closed.
2. Start the hybrid system.
3. Select “Information” on the Home screen to display the vehicle status
monitor.
4. Select “Vehicle Status Monitor”.
5. Select “Engine Oil Level”.
6. Select “Start”. The engine starts and measurement
of the engine oil level begins. Do
not depress the accelerator pedal
during the measurement.
NOTE
If measurement conditions not
shown on the display are not met
such as when warm-up operation
has not been completed due to low
outdoor temperatures, the
measurement error screen may be
displayed. In this case, drive the
vehicle using the engine for a
certain period of time to complete
the warm-up operation and repeat
the procedure.

7. Switch the vehicle power OFF.
NOTE
After the measurement is
completed, the engine does not
stop automatically.

Recommended Oil
Use SAE 0W-20 engine oil.
Mazda Genuine Oil is used in your
Mazda vehicle. Mazda Genuine
0W-20 Oil is required to achieve
optimum fuel economy.
For maintenance service, Mazda
recommends Genuine Mazda Parts
and Genuine Mazda Premium Oil.

Only use SAE 0W-20 oil “Certified For
Gasoline Engines” by the American
Petroleum Institute (API).
Oil with this trademark symbol
conforms to the current engine and
emission system protection standards
and fuel economy requirements of the
International Lubricant Standardization
and Approval Committee (ILSAC),
Inspection and Servicing/Cleaning
Engine Compartment Inspection
9-13
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Exterior Maintenance
WARNING
Dry off brakes that have become wet
by driving slowly, releasing the
accelerator pedal and lightly applying
the brakes several times until the
brake performance returns to normal.
Driving with wet brakes is dangerous.
Increased stopping distance or the
vehicle pulling to one side when
braking could result in a serious
accident. Light braking will indicate
whether the brakes have been
affected.
CAUTION
Before lifting the windshield wiper
blades off the windshield, always
follow the procedure for moving the
windshield wiper blades. Otherwise,
a wiper blade, wiper arm, or the
hood could be damaged.
Refer to the Replacing Windshield
Wiper Blade Rubbers section (page
9-23) for the procedure on how to
move the windshield wiper blades to
the service position.
 When the vehicle power is switched
ON and the wiper lever is in the
AUTO position, the windshield
wipers may operate automatically in
the following cases:
The area of the windshield above the
rain sensor is touched or wiped with
a cloth.
The windshield or the rain sensor
area in the cabin is hit.
When the vehicle power is switched
ON and the wiper lever is in the
AUTO position, do not touch the
windshield or the windshield wipers
Otherwise, the windshield wipers
will operate automatically which
could catch your fingers or damage
the windshield wipers.
When removing ice or snow, or
cleaning the windshield, always
make sure the wiper lever is in the
OFF position.
 Do not spray water in the engine
compartment. Otherwise, it could
result in engine-starting problems or
damage to electrical parts.
 When washing and waxing the
vehicle, be careful not to apply
excessive force to any single area of
the vehicle roof. Otherwise, you
could dent the vehicle.
 Make sure that the fuel-filler lid is
closed and lock the doors.
Otherwise, the fuel-filler lid may be
forcefully opened by water pressure
causing damage to the vehicle or
fuel-filler lid.
 (Vehicles with hands-free liftgate)
When washing or waxing the vehicle,
turn off the hands-free liftgate using
the Mazda Connect or do not bring
the transmitter into the area around
the liftgate. Otherwise, the liftgate
could open unexpectedly resulting in
an accident. Refer to Power Liftgate
section (page 4-21).
 Do not use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or caustic
agents on chrome-plated or
anodized aluminum parts. This may
damage the protective coating; also,
cleaners and detergents may discolor
or deteriorate the paint.
Inspection and Servicing/Cleaning
Exterior Maintenance
9-35
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04