instrument cluster MAZDA CX90 2024 Owner's Manual

Engine Coolant
Temperature Gauge
Displays the engine coolant
temperature. The blue range of the
gauge indicates that the engine coolant
temperature is low, and the red range
of the gauge indicates that the engine
coolant temperature is high and
overheating.

CAUTION
If the engine coolant temperature
gauge needle is in the red range, there
is the possibility of overheating. Drive
slowly to reduce engine load.
Refer to Taking Action with
Overheating on page 8-20.
High Voltage Battery Powe r G au ge
The remaining power of the high
voltage battery is indicated when the
vehicle power is switched ON.
When the high voltage battery is fully
charged, F is indicated. As the level
lowers, the needle approaches E.

NOTE
After charging, it may require some
time for the needle to stabilize.
The arrow indicates that the
charging port is on the right side.
Driving
Instrument Cluster
5-34
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Fuel Gauge
The fuel gauge shows approximately
how much fuel is remaining in the tank
when the vehicle power is switched
ON.
When the fuel tank is full, F (Full) is
indicated, and as the level lowers the
needle approaches E (Empty).

NOTE
After refueling , it may require some
time for the indicator to stabilize. In
addition, the indicator may deviate
while driving on a slope or curve
since the fuel moves in the tank.
The direction of the arrow
indicates that the fuel-filler lid is on
the left side of the vehicle.
Dashboard Illumination
When the lights are turned on with the
vehicle power switched ON, the
brightness of the dashboard
illumination is dimmed. However,
when the light sensor detects that the
surrounding area is bright such as
when the lights are turned on in the
daytime, the dashboard illumination
does not dim.
NOTE
When the vehicle power is switched
ON in the early evening or at dusk, the
dashboard illumination is dimmed for
several seconds until the light sensor
detects the brightness of the
surrounding area, however, the
dimming may cancel after the
brightness is detected.
Driving
Instrument Cluster
5-35
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the
Dashboard Illumination
Brightening the dashboard
illumination
Dimming the dashboard illumination
If you press the - switch again while
the dashboard illumination is at
maximum dimness, a sound is
activated to notify you that the dimmer
setting is at maximum dimness.
Function for canceling illumination
dimmer
The illumination dimmer can be
canceled by pressing the + switch
while the instrument cluster is at
maximum dimness and while the
vehicle power is switched ON. If you
press the + switch again while the
illumination dimmer is canceled, a
sound is activated to notify you that it
is canceled. If the instrument cluster's
visibility is reduced due to glare from
surrounding brightness, cancel the
illumination dimmer.
Driving
Instrument Cluster
5-36
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Outside TemperatureDisplay
When the vehicle power is switched
ON, the outside temperature is
displayed.

NOTE
The outside temperature display may
differ from the actual outside
temperature depending on the
surroundings and vehicle conditions.
Maximum Driving
Distance Display
The maximum driving distance is
calculated and displayed based on the
current remaining charge of the high
voltage battery/fuel tank level and the
electrical power consumption rate/
fuel economy. When the maximum
driving distance is 50 km (30 miles) or
farther, the maximum driving distance
indication decreases in 10 km (10
mile) increments, and when the
maximum driving distance is 50 km
(30 miles) or shorter, it decreases in 1
km (1 mile) increments.
1. Remaining distance-to-full discharge display for high voltage
battery only
2. Maximum driving distance display for fuel and high voltage battery
NOTE
The maximum driving distance is just
an approximate numerical value and
differs from the actual driving distance.
Drive the vehicle while checking the
high voltage battery power gauge/fuel
gauge.
Driving
Instrument Cluster
5-37
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Average Electrical PowerConsumption Rate Display
The average energy efficiency is
calculated every 30 seconds from the
total traveled distance and the total
electrical power consumption since
the vehicle was purchased or the past
data was reset, and the rate is
displayed.

How to Use the Average
Electrical Power
Consumption Rate
Display
To reset the displayed average
electrical power consumption rate
data, press the INFO switch for 2
seconds or longer.
After resetting the data, - - - kWh/100
km (- - - mile/kWh) is displayed
before the average electrical power
consumption rate is recalculated and
displayed.
The average electrical power
consumption rate is also reset at the
same time as the average fuel
economy.
Driving
Instrument Cluster
5-38
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Average Fuel EconomyDisplay
This mode displays the average fuel
economy by calculating the total
traveled distance and the total fuel
consumption since the vehicle was
purchased or the past data was reset.
The average fuel economy is calculated
and displayed every 30 seconds.
How to Use the AverageFuel Economy Display
To reset the displayed average fuel
economy data, press the INFO switch
for 2 seconds or longer.
After resetting the data, - - - L/100 km
(- - - mpg) is displayed until the
average fuel economy is recalculated
and displayed.
The average fuel economy is also reset
at the same time as the average
electrical power consumption rate.
Driving
Instrument Cluster
5-39
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Instantaneous Electrical
Power Consumption Rate Display
The instantaneous energy efficiency
while driving the vehicle is calculated
from the electrical power consumption
and displayed.

NOTE
Displays the 0 position when the
vehicle speed decreases to a
constant speed or slower.
The arrow on the instantaneous
electrical power consumption rate
gauge indicates the average electrical
power consumption rate.
Instantaneous Fuel
Economy Display
This displays the current fuel economy
by calculating the amount of fuel
consumption and the distance
traveled.

NOTE
Displays the 0 position when the
vehicle speed decreases to a constant
speed or slower.
Driving
Instrument Cluster
5-40
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

i-ACTIVSENSE Status
Symbol (Warning/Risk Avoidance Support
System)
Displays the on/off status of each
i-ACTIVSENSE system.

Compass Display
The direction the vehicle is moving is
displayed in one of eight directions
while the vehicle is being driven.

Driving
Instrument Cluster
5-41
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Message Display
Displays a message to notify the user
of the system operation status and
malfunctions or abnormalities.
Follow the instructions indicated on
the display.
Refer to How to Use the Instrument
Cluster on page 5-28.
Driving
Instrument Cluster
5-42
CX-90_8KG7-EA-22L_Edition1_new2022-11-17 16:05:04

Warning and Cautions forUsing the Selector Lever
WARNING
Always apply the parking brake when
the selector lever is in the P position.
When parking the vehicle, only shifting
the selector lever to the P position is
dangerous as the vehicle may move
unexpectedly and result in an accident.
Do not move the selector lever from
the N or P position while the engine
speed is high.
Otherwise, the vehicle will move
suddenly which could lead to an
unexpected accident.
When operating the selector lever,
shift the selector lever with the brake
pedal firmly depressed and the
vehicle completely stopped.
Operating the selector lever while the
vehicle is moving could lead to an
unexpected accident.
Do not shift the selector lever with the
accelerator pedal depressed when the
selector lever is in the P or N position.
Always operate the selector lever with
the brake pedal depressed when the
selector lever is in the P or N position.
Otherwise, the vehicle will suddenly
accelerate which could lead to an
accident.
Do not shift the selector lever to the N
position while driving.
Otherwise, it could result in the loss of
the engine braking power and cause
an accident.
Do not depress the accelerator pedal
unnecessarily while the vehicle is
stopped.
If the accelerator pedal is mistakenly
depressed when the se lector lever is in
a position other than the P or N
position, the vehicle could suddenly
accelerate resulting in an accident.
After stopping the vehicle, check the
shift position indication in the
instrument cluster before
re-accelerating.
If the vehicle were to move
unexpectedly, it could lead to an
accident.
Do not allow the vehicle to move in
reverse on an upslope while the
selector lever is in forward drive, or
move forward on a downslope while
the selector lever is in reverse drive.
Otherwise, the engine could stop,
making the steering wheel difficult to
control, which could result in an
accident.
CAUTION
 When visually checking at the rear of
the vehicle while reversing the
vehicle, your body twists around to
the rear. Be careful and make sure
that the brake pedal can be firmly
depressed.
 Completely stop the vehicle before
shifting the select or lever to the P
position. If the selector lever is
shifted to P position before the
vehicle is completely stopped,
unnecessary force will be applied to
the transmission which could cause
damage.
Driving
Selector Lever
5-46
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04