steering wheel MAZDA CX90 2024 Workshop Manual

IndicationContent
2 Vehicle width guide lines (blue) Indicates the approximate width of the vehicle.
Does not display when the steering wheel is operated in
a straight-ahead position.
3 Projected vehicle path distance
guide lines (red/yellow) These guide lines indicate the approximate distance to a
point measured from the rear of the vehicle (from the
end of the bumper).
The center point of the red line indicates the point
about 50 cm (19 in) from the rear end of the rear
bumper.
The center points of the yellow lines indicate the
points about 1 m (39 in) and 2 m (78 in) from the rear
end of the rear bumper.
4 Parking sensor status icon Indicates that the parking sensor has a problem or it is
switched off.
Ty p e B
When the parking sensor is ON
When the parking sensor is OFF
Driving
Rear View Monitor
5-232
CX-90_8KG7-EA-22L_Edition1_new
2022-11-17 16:05:04

6
Equipment to Make Cabin More
Comfortable
Fully Automatic Climate Control
(Front)..................................... 6-2Air Vents............................... 6-2
How to Use the Air Vents....... 6-2
Fully Automatic Climate
Control................................. 6-4
Fully Automatic Climate Control
Overview.............................. 6-6
How to Use the Fully Automatic
Climate Control..................... 6-7
Operating Each Switch........... 6-8
Convenient Ways to Use the Fully
Automatic Climate Control ..........
.......................................... 6-12
Fully Automatic Climate Control
(Rear).................................... 6-15 Air Vents............................. 6-15
How to Use the Air Vents..... 6-15
Fully Automatic Climate Control
System................................ 6-16
Fully Automatic Climate Control
System Overview................. 6-17
How to Use the Fully Automatic
Climate Control System........ 6-19
Operating Each Switch......... 6-20
Seat Warmer.......................... 6-22 Seat Warmer
*...................... 6-22
Warnings and Cautions For Using
the Seat Warmer.................. 6-22
How to Use the Seat
Warmer...............................6-23
Convenient Ways to Use the Seat
Warmer...............................6-24
Heated Steering Wheel............ 6-25 Heated Steering Wheel
*........6-25
Warnings and cautions For Using
the Heated Steering Wheel ..........
.......................................... 6-25
How to Use Heated Steering
Wheel................................. 6-26
Convenient Ways to Use Heated
Steering Wheel.................... 6-26
Seat Ventilation...................... 6-27 Seat Ventilation
*.................. 6-27
Warnings and cautions For Using
the Seat Ventilation..............6-27
How to Use the Seat
Ventilation.......................... 6-28
Convenient Ways to Use the Seat
Ventilation.......................... 6-29
Driver Personalization System ..........
............................................ 6-30 Driver Personalization System
*.....
.......................................... 6-30
Warnings and Cautions For Using
the Driver Personalization
System................................ 6-30
How to Use the Driver
Personalization System......... 6-31
*Some models.6-1
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Defroster and Floor Vents
Defroster Vents
Fully Automatic ClimateControl
The following functions are
automatically controlled according to
the set temperature.
Airflow temperature controlAirflow amount controlAirflow mode switchingRecirculate/fresh air mode switchingAir conditioning (cooling/
dehumidifying functions) on/off
Seat warmer level selection*
Heated steering wheel operation*
Seat ventilation level selection*
NOTE
To prevent cold airflow immediately
after heating starts when the hybrid
system is cold, the airflow amount is
decreased.
Fully automatic air-conditioning uses
the sunlight and interior temperature
sensors to control the temperature in
the cabin by measuring interior and
exterior temperatures, humidity, and
sunlight. Do not cover the sunlight/
interior temperature sensor.
Sunlight sensor
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Front)
6-4*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Fully Automatic Climate Control Overview
1. AUTO switch
2. Driver’s side temperature setting switch
3. Driver’s side temperature setting display
4. Linked auto-comfort display
*1
Refer to Convenient Ways to Use the Seat Warmer on page 6-24.
Refer to Convenient Ways to Use Heated Steering Wheel on page 6-26.
Refer to Convenient Ways to Use the Seat Ventilation on page 6-29.
5. Airflow display
6. Mode selector display
7. Air intake selector display
8. Front passenger’s side te mperature setting display
9. Front passenger’s side temperature setting switch
10.SYNC (synchronized temperature) switch
11.A/C switch
12.Air intake selector switch
13.Mode selector switch
14.Fan control switch
15.Climate control system power switch
16.Rear window defogger switch
17.Windshield defroster switch
*1 The display differs depending on the clim ate control systems, or whether or not
the seat warmer, seat ventilation, and steering warmer are equipped.
Equipment to Make Cabin More Comfortable
Fully Automatic Climate Control (Front)
6-6
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

NOTE
If the hybrid system is stopped while
the seat warmer is operating in manual
mode, the seat warmer does not turn
on automatically the next time the
hybrid system is started. To turn the
seat warmer on, press the switch
again.
In addition, the second-row seat
warmer operation stops automatically
after the seat warmers have operated
for a certain period of time.Convenient Ways to Usethe Seat Warmer
The seat temperature for front seat can
be automatically controlled (auto
mode) at 4 levels (High, Mid, Low,
OFF) according to the conditions in the
cabin.
The seat warmer can be operated in
conjunction with auto mode for the
climate control system.
1. Turn on the “Occupant Comfort”Refer to Mazda Connect Owner's
Manual or consult an Authorized
Mazda Dealer.
2. Press the AUTO switch for the climate control system.
NOTE
If the front passenger’s seat belt is
unfastened, the front passenger’s
seat warmer turns off.
If any of the following switch
operations is performed during auto
mode or the auto operation of the
climate control system is canceled,
the seat warmer switches from auto
mode to manual mode.
Seat warmer switch is pressedSeat ventilation switch is pressed
When the seat warmer switch/seat
ventilation switch is pressed, only the
seat on the side where the switch
was pressed switches to manual
mode.
To return to auto operation, press
the AUTO switch for the climate
control system.
While operating in auto mode, the
(with heated steering wheel)/
(without heated steering wheel)
is displayed.
Equipment to Make Cabin More Comfortable
Seat Warmer
6-24
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Heated Steering Wheel*
The grips on the left and right of the
steering wheel can be warmed up.
Warnings and cautionsFor Using the Heated Steering Wheel
WARNING
The following types of persons should
be careful not to touch the steering
wheel. Otherwise, it could cause a
low-temperature burn.
Infants, small children, elderly
people, and physically challenged
people
 People with delicate skin
 People who are excessively fatigued
 People who are intoxicated
 Pe o pl e w h o have ta ke n
sleep-inducing medicine such as
sleeping pills or cold medicine
Equipment to Make Cabin More Comfortable
Heated Steering Wheel
*Some models.6-25
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use HeatedSteering Wheel
Using the Heated Steering Wheel
1. Start the hybrid system.
2.
1. Heating area
The indicator light in the heated
steering wheel switch turns on.
NOTE
The heated steering wheel operates for
a certain period of time and then stops
automatically.
Turning Off the Heated Steering
Wheel
Press the heated steering wheel switch.
The heated steering wheel stops and
the indicator light in the switch turns
off.
Convenient Ways to Use
Heated Steering Wheel
The steering warmer can be
automatically (auto mode) turned
on/off depending on the conditions in
the cabin.
The steering warmer can be operated
in conjunction with auto mode for the
climate control system.
1. Turn on the “Occupant Comfort” Refer to Mazda Connect Owner's
Manual or consult an Authorized
Mazda Dealer.
2. Press the AUTO switch for the
climate control system.
NOTE
If the heated steering wheel switch is
pressed during auto mode or the
auto operation of the climate control
system is canceled, the heated
steering wheel switches from auto
mode to manual mode.
To return to auto operation, press
the AUTO switch for the climate
control system.
If the vehicle power is switched OFF
while the heated steering wheel is
operating in auto mode, the heated
steering wheel operates in auto
mode again the next time the vehicle
power is switched ON.
Equipment to Make Cabin More Comfortable
Heated Steering Wheel
6-26
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Convenient Ways to Usethe Seat Ventilation
The fan operation for front seat is
automatically controlled at 4 levels
(High, Mid, Low, and OFF) according
to the conditions in the cabin.
The seat ventilation can be operated in
conjunction with auto mode for the
climate control system.
1. Turn on the “Occupant Comfort” Refer to Mazda Connect Owner's
Manual or consult an Authorized
Mazda Dealer.
2. Press the AUTO switch for the
climate control system.
NOTE
If the front passenger’s seat belt is
unfastened, the front passenger’s
seat ventilation turns off.
If any of the following switch
operations is performed during auto
mode or the auto operation of the
climate control system is canceled,
the seat ventilation switches from
auto mode to manual mode.
Seat warmer switch is pressedSeat ventilation switch is pressed
When the seat warmer switch/seat
ventilation switch is pressed, only the
seat on the side where the switch
was pressed switches to manual
mode.
To return to auto operation, press
the AUTO switch for the climate
control system.
While operating in auto mode, the
(with heated steering wheel)/
(without heated steering wheel)
is displayed.
Equipment to Make Cabin More Comfortable
Seat Ventilation
6-29
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Driver PersonalizationSystem
*
The Driver Personalization System
recognizes the driver using the camera
inside the vehicle and automatically
restores the various driver settings that
have been stored.
The following 2 functions have been
added depending on the grade and
specification.
Ideal Driving Position Assist
*
This function makes an overall
determination of the driver's physique
based on the information from the
camera in the vehicle and the input
height, and automatically adjusts to
the recommended driving position.
Entry/Exit Assist
*
This function automatically moves the
seat and the steering wheel so that the
driver can easily enter and exit the
vehicle.
Warnings and CautionsFor Using the Driver
Personalization System
CAUTION
Do not allow a hand, fingers, or feet to
come close the area under or around
the seat or steering wheel when the
seat or steering wheel is automatically
moving by the driver personalization
system. Otherwise, your hand, fingers,
or feet could be injured.
Equipment to Make Cabin More Comfortable
Driver Personalization System
6-30*Some models.
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

How to Use the Driver
Personalization System
NOTE
In the following cases, the driver may
not be registered or recognized
correctly.
You are wearing sunglasses, a
mask, or other accessories.
There is an obstruction between
your face and the camera.
Looking forward or at the Mazda
Connect screen will facilitate driver
recognition.
If the vehicle power is switched ON
during recognition, the driver will be
recognized as a guest. If the vehicle
power is switched ON without
opening/closing the door even once,
the information of the previously
recognized driver is taken over.
If the recognition is difficult,
reprogram the data. Two types of
faces can be programmed, such as
when wearing glasses or contact
lenses.
If people with similar faces are
programmed, they may be
recognized incorrectly.
Refer to Driver Monitoring Camera
on page 5-139
Programming
1. Switch the vehicle power ON.
2. Select “Settings” from the Mazda Connect home screen.
3. Select “Driver Personalization System”.
4. Select “Add New Driver”. Operate according to the Mazda
Connect screen.
NOTE
When the door is closed and “Add
New Driver” is displayed on the
Mazda Connect home screen,
follow the instructions on the
screen.
5. (Vehicles with Ideal Driving
Position Assist)
Program the driver’s height
according to the Mazda Connect
screen.
The following items are
automatically adjusted.
Driver's seat position (Angle,
forward and back positions,
entire height, front end height)
Active driving display (Display
height)
Outer mirror angleSteering wheel position (forward
and back positions, height)
NOTE
Under the following conditions,
the Ideal Driving Position Assist is
canceled.
The switch is operated due to
the position adjustment of the
driver's seat, the steering
wheel, the outer mirrors, or the
active driving display.
The key lock button or unlock
button is operated.
The vehicle moves.
The selector lever is shifted to a
position other than P.
6. Follow the Mazda Connect screen to complete the programming.
Equipment to Make Cabin More Comfortable
Driver Personalization System
6-31
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04