oil capacity MAZDA CX90 2024 Owners Manual

Winter Driving
Carry emergency gear, including tire
chains, window scraper, flares, a small
shovel, jumper cables, and a small bag
of sand or salt.
Ask an Authorized Mazda Dealer to
check the following:
Have the proper ratio of antifreeze in
the radiator.
Refer to Inspecting the Coolant on
page 9-14.
Inspect the battery and its cables.
Cold reduces battery capacity.
Use an engine oil appropriate for the
lowest ambient temperatures that
the vehicle will be driven in (page
9-18).
Inspect the ignition system for
damage and loose connections.
Use washer fluid made with
antifreeze―but do not use engine
coolant antifreeze for washer fluid
(page 9-17).
When driving on ice or in water, snow,
mud, sand, or similar hazards:
Be cautious and allow extra distance
for braking.
Avoid sudden braking and sudden
maneuvering.
Do not pump the brakes. Continue
to press down on the brake pedal.
Refer to Antilock Brake System (ABS)
on page 5-84.
If you get stuck, select a lower gear
and accelerate slowly. Do not spin
the rear wheels.
For more traction in starting on
slippery surfaces such as ice or
packed snow, use sand, rock salt,
chains, carpeting, or other nonslip
material under the rear wheels.
NOTE
Remove snow before driving. Snow
left on the windshield is dangerous
as it could obstruct vision.
Do not apply excessive force to a
window scraper when removing ice
or frozen snow on the mirror glass
and windshield.
Never use warm or hot water for
removing snow or ice from windows
and mirrors as it could result in the
glass cracking.
Drive slowly. Braking performance
can be adversely affected if snow or
ice adheres to the brake
components. If this situation occurs,
drive the vehicle slowly, releasing the
accelerator pedal and lightly applying
the brakes several times until the
brake performance returns to
normal.
Driving
Winter Driving
5-240
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Seat Belt Maintenance
WARNING
If a seat belt appears frayed or has
abrasions, have it replaced by an
Authorized Mazda Dealer.
If a seat belt is used under such a
condition, it cannot function at its full
capacity which could result in serious
injury or death.
Use a mild detergent to remove
soiling from a seat belt.
If organic solvents are used for cleaning
the seat belts or they become stained
or bleached, there is the possibility of
them becoming weakened and as a
result, they may not function at their
full capacity which could cause serious
injury or death.
Do not disassemble, modify, or
replace a seat belt.
If a seat belt is used under such a
condition, it cannot function at its full
capacity which could result in serious
injury or death.
Always have your vehicle inspected by
an Authorized Mazda Dealer if the
vehicle has been involved in an
accident.
Seat belts with the pretensioner system
and the seat belts with the load-limiter
system cannot be reused once they
have operated (deployed).
If a seat belt is used under such a
condition, it cannot function at its full
capacity which could result in serious
injury or death.
Always consult an Authorized Mazda
Dealer when scrapping the vehicle.
If the pretensioner system operates
(deploys) unexpectedly, it could result
in serious injury or death.
Do not repair the pretensioner system
parts or wiring harnesses and do not
attempt diagnose the pretensioner
system circuits using an electrical
tester or similar device.
Otherwise, they may not function
normally or they may operate
incorrectly, which could result in
serious injury or death.

Check periodically that the seat belt
systems work properly and are not
damaged.

1. Lightly tap with a mild detergent toremove dirt.
2. Wipe with a thoroughly wrung cloth.
3. Allow to dry.
4. Make sure that the seat belt locks
when it is pulled rapidly. If it is still
not retracting properly, have it
inspected at an Authorized Mazda
Dealer.
NOTE
Clean seat belts diligently if they get
dirty. Leaving them uncleaned will
make it difficult to clean them later,
and it may affect the smooth retracting
of the seat belt.
Inspection and Servicing/Cleaning
Interior Maintenance
9-40
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04

Capacities
(Approximate Quantities)
ItemCapacity
Engine oil With oil filter replace-
ment
4.5 L (4.8 US qt, 4.0 Imp qt)
Without oil filter re-
placement 4.3 L (4.5 US qt, 3.8 Imp qt)
Coolant EV system
6.5 L (6.9 US qt, 5.7 Imp qt)
Engine 9.2 L (9.7 US qt, 8.1 Imp qt)
Automatic transmission fluid 7.3 L (7.7 US qt, 6.4 Imp qt)
Transfer case oil 0.51 L (0.54 US qt, 0.45 Imp qt)
Front differential oil 0.35 L (0.37 US qt, 0.31 Imp qt)
Rear differential oil 0.90 L (1.0 US qt, 0.8 Imp qt)
Fuel tank 70.0 L (18.5 US gal, 15.4 Imp gal)
Check oil and fluid levels with dipsticks or reservoir gauges.
Specifications/Customer Information and Reporting Safety Defects
Ve h i c l e
Specification
10-67
CX-90_8KG7-EA-22L_Edition1_new 2022-11-17 16:05:04