MAZDA MODEL 3 HATCHBACK 2015 Navigation Manual (in English)

53
4.1.3 Road safety cameras and other proximity alert points (Only some countries
and regions)
There is a special proximity warning for road safety cameras (like spee\
d or red light cameras)
and other proximity alert points (like schools or railroad crossings).\

The application can warn you when you approach road safety cameras like \
speed cameras
or dangerous areas like school zones or railroad crossings. You can set up the different alert
types individually in Warning settings (page 57).
The following alert types are available: • Audio warning: When approaching one of these points, a beep sound (regular sound) can be used or the type of warning can be announced (TTS), and an extra al\
ert can warn you
if you exceed the given speed limit while approaching the point.
• Always: The type of the alert point, its distance, and the related speed limit a\
ppear on the Map screen while you are approaching one of these points.
For some of the alert points, the enforced or expected speed limit is av\
ailable. For these points,
the audio alert can be different if you are below or above the given speed limit.
Setting can be selected using Warning Settings:
• Only when speeding: The audio alert is only played when you exceed the given speed limit.
• When approaching: The audio alert is always played when approaching one of these alert points. To draw you attention, the alert may differ if you exceed the speed limit.
Note! The warning for road safety cameras is disabled when you are in a
country where road safety camera warning is prohibited. However, you
must ensure on your own liability that using this feature is legal in th\
e
country where you intend to use it.
/"7"76#&JOEC







54
4.1.4 Speed limit warning (Only some countries and regions)
Maps may contain information about the speed limits of the roads. The navigation system is
able to warn you if you exceed the current limit. This information may not be available for your
region (ask your local dealer), or may not be fully correct for all ro\
ads on the map.
The speed warning can be set from the Warning Settings (page 57).
Setting can be selected using Warning Settings:• Audio warning: You will hear a warning beep if you exceed the speed limit by a certain percentage.
• Visual warning: If you exceed the speed limit on a road, the speed limit \
for the current road is shown on the map.
You can also choose to see the speed limit sign on the map all the time. \
4.1.5 Traffi c information in route planning (Only some countries and regions)
The recommended route is not always the same between two points. Of fl ine historical traf fi c
information (historical speed information or traf fi c patterns) can be taken into account in the
route calculation based on the time of day and the day of week whenever \
suitable data exists.
In addition, real-time traf fi c information can help you avoid current traf fi c events like temporary
road closures or a traf fi c jam caused by an accident. Both functions are subject to data
availability.
Select
after selecting on the MAP screen to display the historical traf fi c information
on the map. A 2D map is displayed with road segments colored by the density of the tr\
af fi c in
the given period. The current information is shown when you open the screen. Modify the da\
y
of week and the time of day to see the desired period.
4.1.5.1 Historical traf fi c
If historical traffi c information is available with the map data, the navigation system can \
use it
when planning a route. In normal cases, these statistics help you avoid \
usual traf fi c jams on
the given day of week in the given hour but in some cases like on public\
holidays that fall on
normal weekdays, they can be misleading. You can disable this feature in Traf fi c settings (page
58).
Select
after selecting on the MAP screen to display the historical traf fi c information
on the map.
/"7"76#&JOEC







55
4.1.5.2 Online traffi c information (Only some countries and regions)
Unlike historical traf fi c information, online traf fi c can provide you with the real-time status of
the traffi c. Route calculation can avoid road blocks or unexpected traf fi c jams caused by an
accident.
Note! This feature needs an active Internet connection.
The application automatically takes into account the traf fi c events received. You do not need to
set anything in the program. When the navigation system receives traf fi c information that may
affect your route, the program will warn you that it is recalculating the \
route, and navigation will
continue with a new route that is optimal considering the most up-to-dat\
e traf fi c conditions.
To fi ne-tune this recalculation, you can set the minimum delay that can trigg\
er a route
recalculation, or you can instruct the navigation system to have you con\
fi rm the new
recommended route before it takes effect. You can do these in Traf fi c settings (page 58).
Road segments affected by traffi c events are displayed with an alternate color on the map, and
small symbols above the road show the nature of the event:
1. Select
after selecting on the MAP screen.
2. Select
.
3. Select the traffi c category you are interested in, or select
to see the list of
all events:
4. Now select any of the list items to see its details, and to display the \
affected road
segment in its full length on the map:

/"7"76#&JOEC







56
4.2 Settings menu
You can confi gure the program settings, and modify the behaviour of the navigation sy\
stem.
Select after selecting on the MAP screen.
Button Description
You can fi ne-tune the appearance of the Map screen. Adjust the map
view to your needs, show or hide 3D buildings, and manage POI (point of\

interest) display settings (which POI to show on map).
A guidance-related setting is available during route guidance.
A setting related to warnings is available.
Refer to Changing the road types used in route planning (page 50).
A setting for traffi c information is available.
A setting for on-line service is available.
Note!Some functions are not available depending on some countries and
regions.
/"7"76#&JOEC







57
4.2.1 Guidance Settings
ButtonDescription
The guidance audio volume can be changed during route guidance.

4.2.2 Warning Settings
Warning and alert settings are available.
ButtonDescription
The following alert types are available:
: No display and sound
: Only display
: Both sound and display
The speed limit warning display can be changed.
: No display and sound
: Only display
: Both sound and display
A setting is available which sounds a beep at alert points, and it can be\

set to on or off. In addition, detailed settings concerning the warning can
be made.
: No display and sound
: Only display
: Both sound and display
The speed camera warning setting can be changed.
: No display and sound
: Only display
: Both sound and display
Note!Some functions are not available depending on some countries and
regions.
/"7"76#&JOEC







58

4.2.3 Traffi c settings
Button Description
Use this switch to enable or disable historical traf fi c data and traffi c
patterns. This locally stored information can be very useful in normal
circumstances but for example on public holidays it may be better to tur\
n
off in order not to take into account normal weekday traf fi c jams.
Use this switch to enable or disable receiving real-time traf fi c information
online. The rest of the buttons below are all related to this real-time
information and are available only if receiving is enabled.
You can also de fi ne whether to receive online traf fi c only when connected
to a WiFi network.
Alternative routes are offered for detours.
An appropriate alternative route is determined provided by the navigatio\
n
system in consideration of traf fi c conditions.
You can select how much time delay on the alternative route you are
willing to accept.
The alternative route is offered based on the set time.
Note! Some functions are not available depending on some countries and
regions.
/"7"76#&JOEC







59
4.2.4 Route settings
These settings determine how routes will be calculated.
ButtonDescription
The route calculation can be optimized for different situations. See below
for details.
You might need to avoid highways/freeways if you are towing another
vehicle.
Charge roads are pay roads where you can purchase a pass or vignette to
use the road for a longer period of time. They can be enabled or disabled
separately from toll roads.
The navigation system includes toll roads (pay roads where there is a
per-use charge) in the routes by default. If you disable toll roads, th\
e
navigation system plans the best toll-free route.
The navigation system includes ferries in a planned route by default.
However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on
ferries.
Setting in which routes with carpool lanes can be created or not created\
.
The navigation system excludes unpaved roads by default: unpaved roads
can be in a bad condition and usually you cannot reach the speed limit o\
n
them.
A border crossing may be a shorter route depending on the route. For this\

function, you can select whether or not to cross a border when planning \
the route.
/"7"76#&JOEC







60
4.2.5 Map settings
You can fi ne-tune the appearance of the Map screen, adjust the map view to your ne\
eds, show
or suppress 3D buildings, and manage Place visibility settings (which P\
laces to show on the
map).
The map is always shown on the screen so that you can see the effect when you change a
setting. Scroll the screen downward to display the setting behind the lo\
wer part of the screen.
Button Description
When this button is selected, the map view mode can be changed.
•
: Displays things such as actual construction sites three
dimensionally on the map.
•
: The map is rotated so that the direction of travel is displayed
in the upward direction.
•
: The map is displayed so that north is up regardless of the
direction of travel.
Adjust the basic zoom and tilt levels to your needs. Three levels are
available.
During route guidance in any map view mode, the function for zooming in \
on approaching intersections turns on/off automatically.
Show or hide 3D city models, 3D artistic or block representation of all \
city
building data containing actual building sizes and positions on the map.\
When enabled, the map zooms out to show an overview of the
surrounding area if the next route event (maneuver) is far away. The
system goes back to the normal map view when you approach the next
event.
Select which Places to show on the map while navigating. Too many
Places make the map crowded, so it is a good idea to show as few as
possible. You have the following possibilities:
• Select the checkbox to show or hide the Place category.
• Select the name of the Place category to open the list of its subcategories.
/"7"76#&JOEC







61
4.2.6 Visual Guidance settings
Adjust how the software helps you navigate with different kinds of route related information on
the Map screen.
Whenever adequate information is available, lane information similar to \
the real ones on road signs above the road is displayed at the top of th\
e
map. You can turn this feature on or off.
If you are approaching a highway/freeway exit or a complex intersection \
and the needed information exists, the map is replaced with a 3D view of\

the junction. You can turn this feature on or let the map be displayed for
the whole route.
When entering tunnels, the surface roads and buildings can be disturbing\
.
This feature shows a generic picture of a tunnel instead of the map. A top-
down overview of the tunnel and remaining distance are also displayed.
4.2.7 Connected Settings (Only some countries and regions)
Set the weather forecast automatic download on/off.
Set the traffi c information automatic download on/off.

/"7"76#&JOEC







62
5 Wi-Fi™ (Only some countries and regions)
5.1 What is Wi-Fi™*?
Wi-Fi™ is the brand name which indicates the interconnection between \
IEEE 802.11 standardized
devices and certifi ed by Wi-Fi Alliance®. Wireless Internet access is possible according to the
surrounding environment (such as a mobile Wi-Fi™ router or a public \
Wi-Fi™ area).
By connecting the audio unit with a Wi-Fi™ compatible device, the Rea\
l Time Traf fi c function of
the navigation system can be used.
* Wi-Fi™, Wi-Fi Alliance
®, and the logo are the trademark or registered trademark of
Wi-Fi Alliance®.
Supported standard IEEE 802.11 b/g/n
Supported security type None
WEP
WPA (WPA-Personal)
WPA2
WPA/WPA2 (WPA+AES&TKIP)
Note! For enhanced communication safety, a WPA, WPA2, or WPA/WPA2
security type setting is recommended. Follow the security setting
procedure in the device's instruction manual.
/"7"76#&JOEC