engine oil MAZDA MODEL 3 HATCHBACK 2016 Quick Guide (in English)

When Driving
For details, refer to Section 4, “Instrument Cluster and Display”.
Warning Lights
Signal Warning
1
2
3
4
5
6
7
8
9
10Charging System Warning Light Brake System Warning Light
Engine Oil Warning Light
High Engine Coolant Temperature
Warning Light
i-stop Warning Light
Power Steering Malfunction Warning
Light
Master Warning Light
Electric Parking Brake Warning
Light
Check Engine Light
11
12
13
14Automatic Transaxle Warning Light
Air Bag/Front Seat Belt Pretensioner
System Warning Light
Tyre Pressure Monitoring System
Warning Light
15KEY Warning Light
Adaptive LED Headlights (ALH)
Warning Light20Mazda Radar Cruise Control
(MRCC) Warning Light
Lane Departure Warning System
(LDWS) Warning Light
Low Fuel Warning Light
120 km/h Warning Light
Seat Belt Warning Light (Front seat)
Low Washer Fluid Level Warning
Light
Door-Ajar Warning Light Signal Warning
ABS Warning Light
These lights turn on or flash to notify the user of the system operation status or a
system malfunction.
19Lane-keep Assist System (LAS) &
Lane Departure Warning System
(LDWS) Warning LightLED Headlight Warning Light
Smart Brake Support/Smart City
Brake Support (SBS/SCBS) Warning
Light
21 16
17
18
22
23
24
25
10
Seat Belt Warning Light (Rear seat)
26
/C\FCA(,'''A'FKVKQPA3WKEM)WKFGKPFD

35
Maintenance and Care
Selector
X Mark MAX MIN
Owner Maintenance Precautions
Routine Service
We highly recommend that these items be inspected daily, or at least every week.
• Engine Oil Level
• Engine Coolant Level
• Brake and Clutch Fluid Level
• Washer Fluid Level
• Battery Maintenance
• Tyre Inflation Pressure
For details, refer to Section 6, “Owner Maintenance”.
Inspecting Engine Oil Level
If the engine oil level exceeds the “X” mark on the dipstick, replace the engine oil.
When inspecting the engine oil level, pull out the dipstick straight without twisting.
In addition, when inserting the dipstick, always insert it without twisting so that
the “X” mark faces the front of the vehicle.
Whenever the engine oil is replaced, the vehicles engine control unit needs to be reset as
soon as possible. Otherwise the wrench indicator light or engine oil warning light may
turn on. To reset the engine control unit, consult an expert repairer, we recommend an
Authorised Mazda Repairer or refer to the vehicle engine control unit reset procedure.
NOTE
The initialization (engine oil data resetting) of the recorded value can be
performed using the following procedure:
1. Switch the ignition OFF.
2. Switch the ignition ON with the selector pressed, and press and hold the
selector for about 5 seconds until the master w
arning light flashes.
3. After the master warning light flashes for several seconds, the
initialization is completed.
/C\FCA(,'''A'FKVKQPA3WKEM)WKFGKPFD