fuses MAZDA MODEL 3 HATCHBACK 2018 Owners Manual (in English)

Pick-up button
Responds to incoming calls. In addition, after selecting a cont act or dialing a number, it
places the call when the button is pressed.
Hang-up button
Ends the call or refuses an incoming call. In addition, it ends the voice recognition
operation.
Commander switch (Type B)
The commander switch is used for volume adjustment and display operation. Tilt or turn the
commander knob to move the cursor. Press the commander knob to select the icon.
Volume adjustment
The power/volume dial of the audio unit*1 or the volume dial of the commander switch*2 is
used to adjust the volume. Turn the dial to the right to increa se volume, to the left to
decrease it.
The volume can also be adjusted using the volume button on the steering wheel.
*1Type A
*2Type B
NOTE
If the volume is lower compared to other audio modes, increase the volume from the device
side.

(Type B)
Conversation volume and the volume of the voice guidance and ringtone can each be set in
advance.
1. Select the
icon on the home screen to display the Communication screen.
2. Select
.
3. Adjust the
and the using the slider.
Interior Features
Bluetooth®
5-71
Mazda3_8GE4-EA-17F_Edition1 2017-4-7 11:59:21

6Maintenance and Care
How to keep your Mazda in top condition.
Essential Information........................6-2 Introduction.................................. 6-2
Scheduled Maintenance.................... 6-4 Scheduled Maintenance (U.S.A.,
Canada, and Puerto Rico)............. 6-4
Scheduled Maintenance
(Mexico)..................................... 6-10
Maintenance Monitor................. 6-16
Owner Maintenance........................ 6-18 Owner Maintenance
Precautions................................. 6-18
Hood........................................... 6-20
Engine Compartment
Overview.................................... 6-22
Engine Oil...................................6-23
Engine Coolant........................... 6-25
Brake/Clutch Fluid ..................... 6-27
Washer Fluid............................... 6-27
Body Lubrication...... .................. 6-28
Wiper Blades.............................. 6-29
Battery........................................ 6-33
Key Battery Replacement........... 6-35
Tires............................................ 6-38
Light Bulbs................................. 6-42
Fuses........................................... 6-57
Appearance Care............................. 6-63
Exterior Care.............................. 6-63
Interior Care................................6-69
6-1
Mazda3_8GE4-EA-17F_Edition1 2017-4-7 11:59:21

Fuses
Your vehicle's electrical system is
protected by fuses.

If any lights, accessories, or controls do
not work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.

If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.
▼ Fuse Replacement
Replacing the fuses on
the vehicle's left
side
If the electrical system does not work, first
inspect the fuses on the vehicle's left side.

1. Make sure the ignition is switched off,
and other switches are off.
2. Open the fuse panel cover.
3. Pull the fuse straight out with the fuse puller provided on the fuse block
located in the engine compartment.
4. Inspect the fuse and replace it if it isblown.
Normal Blown
5. Insert a new fuse of the same
amperage rating, and make sure it fits
tightly. If it does not fit tightly, have an
expert install it. We recommend an
Authorized Mazda Dealer.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the AUDIO or OUTLET circuit.
CAUTION
Always replace a fuse with a genuine
Mazda fuse or equivalent of the same
rating. Otherwise you may damage the
electric system.
Maintenance and Care
Owner Maintenance
6-57
Mazda3_8GE4-EA-17F_Edition1 2017-4-7 11:59:21

6. Reinstall the cover and make sure thatit is securely installed.
Replacing the fuses under the hood
If the headlights or other electrical
components do not work and the fuses in
the cabin are normal, inspect the fuse
block under the hood. If a fuse is blown, it
must be replaced. Follow these steps:

1. Make sure the ignition is switched off, and other switches are off.
2. Remove the fuse block cover.
3. If any fuse but the MAIN fuse is
blown, replace it with a new one of the
same amperage rating .
Normal
Blown
WARNING
Do not replace the main fuse and
multiplex slow blow fuse by yourself.
Have an Authorized Mazda Dealer
perform the replacement:
Replacing these fuses by yourself is
dangerous because they are high
current fuses. Incorrect replacement
could cause an electrical shock or a
short circuit resulting in a fire.
4. Reinstall the cover and make sure that it is securely installed.
Maintenance and Care
Owner Maintenance
6-58
Mazda3_8GE4-EA-17F_Edition1 2017-4-7 11:59:21

(Mexico)
Tire sizeInflation pressure
Front Rear
P205/60R16 91H 250 kPa (2.5 bar, 36 psi) 250 kPa (2.5 bar, 36 psi )
Tire sizeInflation pressure
Up to 3 persons ―Full load
215/45R18 89W Front 240 kPa (2.4 bar, 35 psi) 280 kPa (2.8 bar, 41 psi)
Rear 230 kPa (2.3 bar, 33 psi) 300 kPa (3.0 bar, 44 psi)
1 person's weight: About 75 kg
Temporary spare tire
Tire size
Inflation pressure
T125/70D16 96M 420 kPa (60 psi)
Lug nut tightening torque
When installing a tire, tighten the lug nut to the following to rque.
108—147 N ･m (12—14 kgf ･m, 80—108 ft ･lbf)
▼ Fuses
Refer to Fuses on page 6-57.
Specifications
Specifications
9-11
Mazda3_8GE4-EA-17F_Edition1
2017-4-7 11:59:21

Index
Aluminum Wheel Maintenance... 6-68
Bright-Metal Maintenance...........6-67
Maintaining the Finish................ 6-64
Plastic Part Maintenance............. 6-68
F
FlasherHazard warning........................... 4-56
Headlights.................................... 4-43
Flat Tire............................................... 7-3 Mounting the Spare Tire..............7-11
Removing a Flat Tire.................... 7-7
Floor Mat.......................................... 3-46
Fluid Brake/Clutch................................ 6-27
Washer......................................... 6-27
Fluids Classification................................. 9-4
Fog Lights......................................... 4-48
Foot Brake.........................................4-60
Forward Sensing Camera (FSC)..... 4-131
Front Seat............................................ 2-5
Fuel Filler lid and cap......................... 3-28
Gauge........................................... 4-15
Requirements............................... 3-25
Tank capacity.................................9-5
Fuel Consumption Display............... 4-72
Fuel Economy Monitor..................... 4-72 Control status display.................. 4-73
Ending screen display................. 4-73
Fuel consumption display............4-72
Fuses.................................................. 6-57 Panel description......................... 6-59
Replacement................................ 6-57
G
Gauges............................................... 4-12
Glove Compartment........................ 5-136
H
Hazardous Driving............................ 3-46
Hazard Warning Flasher....................4-56
HeadlightsComing home light......................4-46
Control......................................... 4-43
Flashing....................................... 4-46
High-low beam............................ 4-46
Leaving home light..................... 4-47
Leveling....................................... 4-47
Head Restraint................................... 2-10
High Beam Control System
(HBC)................................................ 4-81 High Beam Control System (HBC)
indicator light (green)..................4-82
Hill Launch Assist (HL A)................ 4-64
HomeLink Wireless Control
System............................................... 4-56
Hood Release............. ....................... 6-20
Horn...................................................4-55
I
If a Warning Light Turns On or
Flashes............................................... 7-25
If the Active Driving Display does not
operate............................................... 7-45
Ignition
Switch............................................ 4-4
Ignition not switched off (STOP)
warning beep..................................... 7-39
Immobilizer System..... ..................... 3-41
Indicator Lights................................. 4-25 Low engine coolant
temperature.................................. 4-28
Wrench......................................... 4-28
Inside Trunk Release Lever.............. 3-24
Inspecting Brake/Clutch Fluid
Level.................................................. 6-27
Inspecting Coolant Level.................. 6-25
10-4
Mazda3_8GE4-EA-17F_Edition1 2017-4-7 11:59:21