ignition MAZDA MODEL 6 2009 Owners Manual (in English)

Black plate (384,1)
3. Turn the bolt, the screws and the centersection of the plastic retainers
counterclockwise and remove them,
then partially peel back the mudguard.
Bolt
4. Turn the socket and bulb assemblycounterclockwise and remove it.
5. Disconnect the bulb from the socket.
6. Install the new side turn signal unit in the reverse order of removal.
Front turn signal lights/Parking lights
1. Make sure the ignition switch is turnedoff and the headlight switch is off. 2. Turn the bolt, the screws and the center
section of the plastic retainers
counterclockwise and remove them,
then partially peel back the mudguard.
Removal
Installation
3. Turn the socket and bulb assemblycounterclockwise and remove it.
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse order of removal.
High-mount brake light, Groundillumination lights
Due to the complexity and difficulty of
the procedure, the bulbs should be
replaced by an Authorized Mazda Dealer.
8-42
Maintenance and Care
Owner Maintenance
Mazda6_8Z64-EA-08H_Edition1 Page384
Wednesday, June 25 2008 10:5 AM
Form No.8Z64-EA-08H

Black plate (388,1)
2. Disconnect the bulb by pulling it out.
3. Install the new bulb in the reverse orderof removal.
Fuses
Your vehicle's electrical system is
protected by fuses.
If any lights, accessories, or controls don't
work, inspect the appropriate circuit
protector. If a fuse has blown, the inside
element will be melted.
If the same fuse blows again, avoid using
that system and consult an Authorized
Mazda Dealer as soon as possible.
qFuse Replacement
Replacing the fuses on the driver's sidekick-panel
If the electrical system does not work,
first inspect the fuses on the driver's side
kick-panel.
1. Turn off the ignition switch and other
switches.
2. Open the fuse panel cover by sliding the cover straight back toward you.
CAUTION
Pulling the cover off sideways may
break the retaining tabs off.
8-46
Maintenance and Care
Owner Maintenance
Mazda6_8Z64-EA-08H_Edition1 Page388
Wednesday, June 25 2008 10:5 AM
Form No.8Z64-EA-08H

Black plate (389,1)
3. Pull the fuse straight out with the fusepuller provided on the fuse block
located in the engine compartment.
4. Inspect the fuse and replace it if it'sblown.
Normal Blown
5. Insert a new fuse of the same amperage
rating, and make sure it fits tightly. If it
does not fit tightly, have an expert
install it. We recommend an
Authorized Mazda Dealer.
If you have no spare fuses, borrow one
of the same rating from a circuit not
essential to vehicle operation, such as
the AUDIO or CIGAR circuit.
CAUTION
Always replace a fuse with one of the
same rating. Otherwise you may
damage the electric system.
Replacing the fuses under the hood
If the headlights or other electrical
components do not work and the fuses in
the cabin are normal, inspect the fuse
block under the hood. If a fuse is blown, it
must be replaced. Follow these steps:
1. Turn off the ignition switch and all
other switches.
2. Remove the fuse block cover.
3. If any fuse but the MAIN fuse is blown, replace it with a new one of the
same amperage rating .
Normal
Blown
Maintenance and Care
Owner Maintenance
8-47
Mazda6_8Z64-EA-08H_Edition1 Page389
Wednesday, June 25 2008 10:5 AM
Form No.8Z64-EA-08H

Black plate (396,1)
Exterior Care
Followalllabel and container directions
when using a chemical cleaner or polish.
Read all warnings and cautions.
q Maintaining the Finish
Washing
CAUTION
When the wiper lever is in the AUTO
position and the ignition switch is in
the ON position, the wipers may
move automatically in the following
cases:
Ø If the windshield above the rain
sensor is touched.
Ø If the windshield above the rain
sensor is wiped with a cloth.
Ø If the windshield is struck with a
hand or other object.
Ø If the rain sensor is struck with a
hand or other object from inside
the vehicle.
Be careful not to pinch hands or
fingers as it may cause injury, or
damage the wipers. When washing
or servicing your Mazda, make sure
the wiper lever is in the OFF position.
To help protect the finish from rust and
deterioration, wash your Mazda
thoroughly and frequently, at least once a
month, with lukewarm or cold water.
If the vehicle is washed improperly, the
paint surface could be scratched. Here are
some examples of how scratching could
occur. Scratches occur on the paint surface
when:
lThe vehicle is washed without first
rinsing off dirt and other foreign
matter.
lThe vehicle is washed with a rough,
dry, or dirty cloth.
lThe vehicle is washed at a car wash
that uses brushes that are dirty or too
stiff.
lCleansers or wax containing abrasives
are used.
NOTE
lMazda is not responsible for scratches
caused by automatic car washes or
improper washing.
lScratches are more noticeable on vehicles
with darker paint finishes.
To minimize scratches on the vehicle's
paint finish:
lRinse off any dirt or other foreign
matter using lukewarm or cold water
before washing.
lUse plenty of lukewarm or cold water
and a soft cloth when washing the
vehicle. Do not use a nylon cloth.
lRub gently when washing or drying the
vehicle.
lTake your vehicle only to a car wash
that keeps its brushes well maintained.
lDon't use abrasive cleansers or wax
that contain abrasives.
CAUTION
Don't use steel wool, abrasive
cleaners, or strong detergents
containing highly alkaline or caustic
agents on chrome-plated or anodized
aluminum parts. This may damage
the protective coating; also, cleaners
and detergents may discolor or
deteriorate the paint.
8-54
Maintenance and Care
Appearance Care
Mazda6_8Z64-EA-08H_Edition1 Page396
Wednesday, June 25 2008 10:5 AM
Form No.8Z64-EA-08H

Black plate (454,1)
Personalization Features
The following“Personalization Features ”are possible. These settings can only be changed by an Authorized
Mazda Dealer.
Setting FunctionInitial Setting After Setting Change
Auto headlight on/off Adjusts headlight illumination on/off timing
based on surrounding lightness/darkness 2000
―4000 lx 1000 ―2000 lx
Auto headlight off Time required for headlights to turn off after
ignition is switched off 30 seconds 0/60/120 seconds
Turn indicator Sets beep sound volume level HighLow
Blind spot warning Deactivates warning beep function Activated Deactivated
Illumination entry Time required for interior lamp to turn off
automatically after all doors are closed
15 seconds 7.5/30/60 seconds
Deactivates function that allows interior lamp
to illuminate automatically when ignition is
switched off Activated Deactivated
Deactivates function that allows interior lamp
to illuminate automatically when doors are
unlocked Activated Deactivated
Time required for interior lamp to turn off
automatically
(prevents battery depletion when a door is
open/ajar) 30 minutes 10 minutes
Smart turn Activates function that allows turn signal lights
to flash three times with momentary turn switch
operation (when changing lanes)
Deactivated Activated
Keyless entry Selects unlocking method with the retractable
key
Press×2
Press×1
Time required for doors to relock automatically
after unlocking with transmitter 30 seconds 60/90 seconds
Deactivates function that allows horn to sound
automatically when doors are locked by
pressing transmitter two consecutive times Activated Deactivated
10-8
Personalization Features
Mazda6_8Z64-EA-08H_Edition1 Page454
Wednesday, June 25 2008 10:6 AM
Form No.8Z64-EA-08H

Black plate (455,1)
SettingFunctionInitial Setting After Setting Change
Advanced keyless
entry Activates function to automatically lock doors
when leaving vehicle
(with key being carried away)
Deactivated Activated
Deactivates advanced key remaining battery
level warning light in instrument cluster Activated Deactivated
Adjusts sound volume of answer-back beep
during keyless entry system operation Low High/Deactivated
Adjusts sound volume of warning beep for
advanced keyless entry system High
Low
Chooses whether permission is given to open
trunk when advanced keys are both inside trunk
or outside vehicle Permitted Not permitted
Deactivates function that allows power supply
to turn off automatically when ignition has been
switched to ACC for a long period of time Activated Deactivated
Selects a transition pattern in which ignition
position can be switched when pressing push
button start ON> Off ON> ACC> Off
Deactivates advanced key function Activated Deactivated
Selects door unlocking method with the door
handle sensor and/or the request switch. 1. Touch the
handle, and only
the driver's door
unlocks.2. Touch the handle,
and all doors unlock./3.
Press the request
switch once to unlock
driver's door. Press
again to unlock the
rest./4. Touch the
handle to unlock
driver's door, then
press the request
switch to unlock the
rest.
The following “Personalization Features ”can be changed by customer.
Setting FunctionInitial Setting After Setting Change
Welcome sound Deactivates welcome sound function 6-28 Activated Deactivated
Personalization Features
10-9
Mazda6_8Z64-EA-08H_Edition1 Page455
Wednesday, June 25 2008 10:6 AM
Form No.8Z64-EA-08H

Black plate (458,1)
A
Accessory Socket ............................ 6-105
Add-On Non-Genuine Parts and
Accessories ....................................... 9-18
Advanced Key ..................................... 3-2Advanced key maintenance ......... 3-5
Advanced key suspend
function ...................................... 3-19
Auxiliary key .............................. 3-18
Locking, unlocking doors ............ 3-8
Opening the trunk lid with request
switch ......................................... 3-10
Operational range ......................... 3-7
Remote control function ............. 3-16
Service ......................................... 3-6
Warning and beep sounds .......... 3-19
When warning indicator/beep is
activated ..................................... 3-22
Air Bag Systems ............................... 2-41
Antenna ............................................. 6-16
Anti-Lock Brake System (ABS) ......... 5-7 Warning light ............................... 5-8
Appearance Care ............................... 8-52
Audio System ................................... 6-16 Audio control switch .................. 6-56
Audio set .................................... 6-27
AUX mode ................................. 6-59
Operating tips for audio
system ........................................ 6-16
Safety certification ..................... 6-62
Automatic Transaxle Driving tips ................................ 5-18
Fluid ........................................... 8-24
Manual shift mode ..................... 5-15
Shift-lock override ..................... 5-14
Shift-lock system ....................... 5-14
Transaxle ranges ........................ 5-13
B
BatteryEmergency starting .................... 7-13
Maintenance ............................... 8-31
Specifications ............................. 10-4
Beeps Electronic Steering Lock ............ 5-59
Ignition key reminder ................. 5-59
Seat belt warning beep Sounds ... 5-59
Tire inflation pressure warning
beep ............................................ 5-59
Before Starting the Engine .................. 4-5
After getting in ............................. 4-5
Before getting in .......................... 4-5
Blind Spot Monitoring
(BSM) System .................................. 5-33 BSM OFF Indicator Light .......... 5-35
BSM OFF Switch ....................... 5-36
Care of Radar Sensors ................ 5-36
Warning Light/Beep ................... 5-35
Bluetooth Audio ............................... 6-63
Bluetooth Hands-Free ....................... 6-72 Basic Bluetooth Hands-Free
Operation ................................... 6-76
Convenient Use of the Hands-Free
System ........................................ 6-79
Hands-Free Setting ..................... 6-85
Mazda Bluetooth Hands-Free
Customer Service ....................... 6-92
Safety Certification .................... 6-92
When Bluetooth Hands-Free Cannot
be Used ...................................... 6-91
Body Lubrication .............................. 8-28
Bottle Holder ................................... 6-101
Brake/Clutch Fluid ........................................... 8-22
11-2
Index
Mazda6_8Z64-EA-08H_Edition1 Page458
Wednesday, June 25 2008 10:6 AM
Form No.8Z64-EA-08H

Black plate (460,1)
E
Engine CoolantOverheating ................................ 7-11
Engine Coolant Temperature
Gauge ................................................ 5-40
Exhaust Gas ........................................ 4-4
Exterior Care ..................................... 8-54
F
Flasher Hazard warning .......................... 5-70
Headlights .................................. 5-60
Flat Tire ............................................... 7-3 Changing ...................................... 7-6
Spare tire and tool storage ............ 7-3
Fluids Classification .............................. 10-4
Owner maintenance ................... 8-15
Fog Lights ......................................... 5-64
Foot Brake .......................................... 5-5
Front Seats
(Electrically Operated Seats) ............... 2-4
Front Seats
(Manually Operated Seats) ................. 2-2
Fuel Filler lid and cap ........................ 3-44
Gauge ......................................... 5-41
Requirements ............................... 4-2
Tank capacity ............................. 10-5
Fuses ................................................. 8-46 Panel description ........................ 8-49
Replacement ............................... 8-46
G
Gauges .............................................. 5-38
Glove Box ....................................... 6-102
H
Hazard Warning Flasher .................... 5-70
Hazardous Driving .............................. 4-7
HeadlightsControl ....................................... 5-60
Flashing ...................................... 5-62
High-low beam .......................... 5-62
Leveling ..................................... 5-62
HomeLink Wireless Control
System .............................................. 5-70
Hood Release .................................... 3-46
Horn .................................................. 5-69
I
Ignition Keys ........................................... 3-23
Switch .......................................... 5-2
Illuminated Entry System ................. 6-94
Immobilizer System
(with Advanced Key) ........................ 3-50
Immobilizer System
(without Advanced Key) ................... 3-53
Indicator Lights ................................. 5-43 BSM OFF ................................... 5-58
Cruise ......................................... 5-57
DSC OFF .................................... 5-57
Headlight high-beam .................. 5-55
Security ...................................... 5-55
Shift position .............................. 5-56
TCS OFF .................................... 5-56
TCS/DSC ................................... 5-56
Turn signal/hazard warning ........ 5-58
Information Display .......................... 6-96 Audio display ............................. 6-97
Climate control display .............. 6-97
Clock .......................................... 6-97
Information display functions .... 6-96
Trip computer ............................. 6-98
11-4
Index
Mazda6_8Z64-EA-08H_Edition1 Page460
Wednesday, June 25 2008 10:6 AM
Form No.8Z64-EA-08H