ECO mode MAZDA MODEL 6 2015 Smart Start Guide (in English)
[x] Cancel search | Manufacturer: MAZDA, Model Year: 2015, Model line: MODEL 6, Model: MAZDA MODEL 6 2015Pages: 42, PDF Size: 6.01 MB
Page 21 of 42

20
www.MazdaUSA.com
ACCELERATOR PEDAL KICKDOWN SWITCH*
The accelerator pedal is equipped with a
kickdown switch to give the driver more
control and to improve fuel economy.
When you depress the accelerator 95% of the
way, you will feel an increase in resistance.
Push harder, and you will feel a click as you
activate the kickdown switch. The transmission
will usually downshift (depending on engine
speed) and the engine will switch to maximum
power mode. This kickdown switch function is
the same in both Manual mode and in “D”.
*Available on vehicles with automatic transmission only.
NOTE: The HL A system will hold the vehicle for a maximum of 2.0 seconds
while the driver is changing from the brake pedal to the accelerator pedal.
HILL LAUNCH ASSIST (HLA)
HL A helps assist you when
accelerating the vehicle from
a stop while on a hill or slope.
When the brake pedal is released
and the accelerator pedal is pushed, HLA prevents the vehicle from rolling
forward or backward. It operates on a downward slope when the shift lever
is in the reverse (R) position, and on an upward slope when the shift lever is
in a position other than the reverse (R) position.
1660320_15b_Mazda6_SSG_021714.indd 202/17/14 11:12 AM
Page 24 of 42

23
i-ELOOP
i-ELOOP (if equipped)
The Mazda-unique regenerative braking system (i-ELOOP) generates and
stores electrical energy in a capacitor during deceleration. Through efficient
energy regeneration, storage, and usage, fuel economy is improved.
i-ELOOP Pre-Charge Mode
If the capacitor is discharged because of vehicle storage (the vehicle \
is parked
for long periods of time), the Multi-Information Display will display t\
he following
i-ELOOP warning message after engine startup:
Multi-Information
Display
Regenerative
braking power
Capacitor power
storage
Capacitor
charge Capacitor
discharge
In Pre-charge mode Driving in Pre-charge mode
i-ELOOP
warning alarm sound
When the warning message is displayed, do not drive the vehicle. Allow the
engine to idle until the warning message is no longer displayed. This time is
needed for normal generator operation.
NOTE:
•
If
the vehicle is jump started, leave the jumper cables connected
until the warning message is no longer displayed.
•
If t
he vehicle is driven while the warning is displayed, a warning
sound will be heard and power steering assist will be limited.
1660320_15b_Mazda6_SSG_021714.indd 232/17/14 11:12 AM
Page 33 of 42

32
BLUETOOTH® AUDIO
Bluetooth® enabled phones
and audio players provide
an opportunity to play music
through the audio system with
no wires attached.
Some phone models do not
support all features. Go to
www.MazdaUSA.com/bluetooth
or contact (800) 430-0153 for
further assistance or to report a
phone /MP3 device concern.
www.MazdaUSA.comAudio Controls (with 5.8” LCD screen)
INSERTING THE CD
Insert CD, label-side up.
HD RADIO
HD radio has a special receiver
which allows it to receive digital
broadcasts (where available)
in addition to the analog
broadcasts it already receives.
Digital broadcasts have better
sound quality than analog
broadcasts as digital broadcasts
provide free, crystal clear audio.
When the HD radio button is
ON (illuminated), there could
be a noticeable difference in
sound quality and volume when
a change from digital to analog
signals occurs. If the sound
quality and volume becomes
noticeably diminished or cuts
off, touch the HD button to turn
OFF HD radio (not illuminated).
Preset Channel: Can be used
to store 6 AM or 12 FM stations.
1
To s
et a channel, first select AM,
FM1 or FM2.
2
Tu
ne to the desired station.
3
Lo
ng-push any of the preset on-
screen buttons. The reception
frequency is programmed and
displayed on the preset button.
4 R
epeat this operation for the other
stations and bands you want to
store. When receiving a programmed
frequency, select AM, FM1, or FM2 and
touch the preset on-screen button. The
station frequency will be displayed.
AUDIO OPERATION
USING VOICE
Audio operation and media selection
can be done using voice. Push the
“Talk” button, wait for a beep, then say
a command in a clear, natural voice (not
too fast or too slow). A list of available
commands will be displayed on the
screen, and if you do not say anything,
the system will read the commands.
Commands will only work when in the
correct mode (Radio, CD, BT, USB, or
Pandora). To change modes, push the
“Talk” button and say “Change mode.”
Some commands are listed below.
Radio: Seek up/down, Preset #
CD: Play track #
B T: Next/Previous folder
CD, USB, BT: P l a y,
Repeat, Shuffle
CD,USB,BT, Pandora:
Pause, Resume
Pandora: Skip song, Thumbs up/down
1660320_15b_Mazda6_SSG_021714.indd 322/17/14 11:13 AM
Page 35 of 42

34
PAIRING YOUR BLUETOOTH® PHONE OR AUDIO DEVICENOTE: For connection issues, please confirm the Bluetooth
connection status by pushing the PHONE button and looking
in the top left corner for the Bluetooth icon and your phone’s
name. Some phones will turn off the Bluetooth signal after connecting the USB
cable to the vehicle or after downloading an update
•
If n
ot displayed, check your phone and make sure Bluetooth is turned on
(or discoverable) in the Settings menu. Detailed instructions for some phones
are available at www.MazdaUSA.com/bluetooth.
•
If t
here is still no connection, delete the pairing data on the system and
your phone and try again after confirming your cell phone is compatible
at www.MazdaUSA.com/bluetooth.
www.MazdaUSA.com
BLUETOOTH® FEATURES
See your Owner’s Manual for more information.
Push the PHONE button, then select the
“Setup” tab.
SMS TEXT AUDIO DELIVERY/ VOICE
R E P LY: Play (read) text from a Bluetooth
connected phone and respond back.
NOT E: If “Message” is grayed out, your phone does not support this
feature. See your Owner’s Manual for more information.
DON’T DISTURB ME: You will not receive phone calls and messages.
DOWNLOAD PHONEBOOK: Use this feature and “All Contacts” to
download and update your phonebook in the vehicle. Some PHONEBOOKS may
not automatically update if changes are made on your phone.
AUTOMATIC 911 CALL: Calls 911 after certain moderate to severe collisions.
This can be turned ON or OFF.
NOTE:
• Ph
one must be paired and connected.
•
Som
e phone models do not support all features. Go to
www.MazdaUSA.com/bluetooth or contact (800) 430-0153 for
further assistance or to report a phone/MP3 device concern.
•
Se
e your Owner’s Manual for more information.
TO MAKE OR RECEIVE A HANDS-FREE CALL
button: To receive/swap a call.
button: To make a call (push and say
“ Phone”.) or to skip vehicle
voice guidance and allow user
to speak next voice command.
button: To end/reject a call. A utomatic Bluetooth
Reconnection:
On engine start, the last connected
device will automatically be
re-connected after several seconds.
To switch phones, go to Device
Settings and select Bluetooth.
1660320_15b_Mazda6_SSG_021714.indd 342/17/14 11:13 AM
Page 38 of 42

37
1 Locate the USB port or AUX jack inside the center console.
2
Conne
ct the device plug into the portable audio player and into the
USB port or AUX jack.
3
Tur
n the vehicle audio system on.
4
•
Au
dio Controls (without 5.8” LCD screen): Push the USB/AUX
button on the audio unit to switch to the AUX mode.
•
Au
dio Controls (with 5.8” LCD screen): Push AUDIO button
on audio system, then touch AUX on-screen button.
5
•
U
SB Port: Use the vehicle’s audio system or steering wheel controls
to
control the connected USB device.
• AUX
Jack: Use the portable audio player controls to play music.
Refer to the Owner’s Manual for additional information.
PORTABLE AUDIO PLAYER INTEGRATION USING THE
USB PORT OR AUX JACK
Your vehicle is equipped with a USB port and auxiliary AUX jack located i\
n the
center console. This will allow you to play your iPod, USB device, or po\
rtable
audio player through the vehicle’s audio system. Learn the system when
parked and do not let it distract you while driving.
USB Port
AUX Jack
Audio
I M P O R TA N T :
• Set the volume level on your portable audio player to the highest level before
distortion starts, then use the vehicle’s audio system to adjust the volume.
• Unplug any device from the USB port and accessory socket before turning off
the vehicle. Leaving devices plugged in can drain the battery and cause issues
during the Bluetooth pairing process at startup. Wait about 15 seconds after
starting the vehicle before plugging anything into the USB port.
NOTE: You will need an audio cable with an 1/8 inch (3.5 mm)
mini stereo plug (available as a Genuine Mazda accessory) to
connect your portable audio player into the aux jack.
1660320_15b_Mazda6_SSG_021714.indd 372/17/14 11:13 AM